• 신재생에너지
• /
• 제18권4호
• /
• pp.38-53
• /
• 2022

T Recently, the government has been promoting the expansion and supply of renewable energy as an alternative for achieving carbon neutrality and the nationally determined contributions by 2030. In 2020, the Ministries of Industry and Environment and the Korea Forest Service collaborated to build a nationwide onshore wind energy siting atlas considering wind resources and forestry and environmental regulations focused on central regulations. In this study, the ordinances of the local governments were analyzed to examine the effects of regional location regulations on the expansion of onshore wind power energy generation facilities, in addition to those of central regulations. A development permit standard survey of 226 urban plan ordinances of the local governments nationwide showed that presently in 2022, 52 municipalities are applying regulations on wind energy generation facilities by ordinances. This is twice more than that in 2018, when renewable energy power generation facility development was difficult. Additionally, the location regulations applied by these ordinances were organized by items and regions, and regulatory characteristics, such as the number and scope, were analyzed by regions. To analyze the spatial distribution characteristics, JeollaNamdo was selected as the case area. A spatial DB was established for regulated areas based on the regional and central regulations, and the spatial distribution characteristics and the regulatory scope were compared and analyzed.

• 응용통계연구
• /
• 제24권6호
• /
• pp.1225-1235
• /
• 2011

본 논문은 수치기상모형에 의해 계산된 수치기상모의풍속($1km{\times}1km$ 해상도)의 정확도를 향상시키기 위한 통계적 보정법을 제안하였다. 이를 위해 남한전역을 $1km{\times}1km$ 격자로 나눈 지점(345,682지점)에 적합한 통계적 바람장 모형으로 부터 남한지역의 바람장을 추정하는 절차와 격자지점별/월별 보정인자를 계산하여 추정된 바람장과 수치 기상모의풍속간의 간극을 보정하는 절차로 이루어진 보정인자법을 개발하였다. 또한 75개 기상관측소지점에서 계산된 수치기상모의풍속자료에 보정인자법을 적용시켜 본 논문에서 제안된 보정법의 유용성을 보였다.

• 대한기계학회논문집B
• /
• 제40권4호
• /
• pp.201-212
• /
• 2016

부산지역 가덕도 일대에 30MW 규모의 육상 풍력발전단지개발을 위한 풍황자원분석과 풍력터빈 최적배치를 수행하였다. 후보지역에 설치되어 운용중인 AWS(KMA)에서 측정된 바람 데이터를 이용하였으며, 데이터 품질분석을 통한 신뢰성 검토를 수행하였다. 1년간 측정된 AWS 데이터는 MERRA 재해석 데이터와 선형희귀(Linear regression method) MCP 기법의 적용을 통해 30년으로 장기 보정되었고, 이를 이용한 풍력터빈 최적배치를 수행하였다. 3MW 풍력터빈을 적용하여 총 25 조건의 풍력터빈 배치에 대한 최적배치를 수행하였으며, 다양한 후류모델을 적용하여 발전량해석을 수행하였다. 단지효율은 97.6%~98.7%, 연간이용률은 37.9%~38.3%로 예측되었고, 후류영향이 고려된 연간발전량이 99,598.4 MWh~100,732.9 MWh로 예측됨에 따라, 우수한 경제성을 갖는 풍력발전단지개발이 가능한 지역임을 확인하였다.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.841-845
• /
• 2009

In this paper, offshore wind resources within the Japan's EEZ (Exclusive Economic Zone) are assessed using wind speed data from the microwave scatterometer SeaWinds onboard QuikSCAT. At first, from the 10m-height wind speed from QuikSCAT, 60 m-height wind speed is estimated by using an empirical equation for height correction. Based on the 60 m-height wind speeds, annual energy Production is calculated under an assumption of installing 2 MW wind turbines every $0.64km^2$. The annual energy production is then accumulated for the entire Japan's territorial waters and EEZ ($4.47{\times}10^6km^2$). As a result, it is shown that the total energy Production is estimated to be $4.86{\times}10^4$ TWh/yr. This offshore wind energy Potential within the EEZ is approximately 50 times higher than the actual annual electricity production in Japan.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1560-1565
• /
• 2010

The renewable resource are getting more attentions with increased concerns on the depletion of fossil fuels and several environmental issues like emission problem. Wind power is a representative option among several renewable sources and the generation capacity using wind power is being increased. However, the wind generation is so volatile on its output characteristic, so it is required to assess the grid impact of wind power generation by measuring the fluctuation effect more precisely. This paper proposes the method for measuring the generation output according to IEC 61400-21(Measurement and assessment of power quality characteristics of grid connected wind turbines) to assess the power quality of wind turbine generation. In addition, it shows an application case to a small-scale wind power generator. In the case study, it suggests a structure design of the proposed measurement instrument both on hardware and software aspects, which is composed of a remote monitoring & data analysis program and an FPGA based real-time signal processing device.

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.9-14
• /
• 2010

The main cause of global warming is carbon dioxide generated from the use of fossil fuels, and active research on the reduction of carbon is in progress to slow down the increasing global warming. Wind turbines generate electricity from kinetic energy of wind and are considered as representative for an energy source that helps to reduce carbon emission. Since the kinetic energy of wind is proportional to the cube of the wind speed, the intensity of wind affects wind farm construction validity the most. Therefore, to organize a wind farm, validity analysis should be conducted first through measurement of the wind resources. To facilitate the approval and permission and reduce installation cost, measuring sensors should be installed at locations below the actual wind turbine hub. Wind conditions change in shape with air density, and air density is most affected by the variable sterrain and surface type. So the magnitude of wind speed depends on the ground altitude. If wind conditions are measured at a location below the wind turbine hub, the wind speed has to be extrapolated to the hub height. This correction of wind speed according to height is done with the Deacon equation used in the statistical analysis of previously observed data. In this study, the optimal Deacon equation parameter was obtained through the analysis of the correction of the wind speed error with the Deacon equation based on the characteristics of terrain.

• 항공우주시스템공학회지
• /
• 제6권4호
• /
• pp.7-11
• /
• 2012

Recently, the renewable energy has been widely used as a wind energy and solar energy resource due to lack and environmental issues of the mostly used fossil fuel. In this situation, the interest in wind power has been risen as an important energy source. For this blade a high efficiency wind turbine blade was designed with the proposing aerodynamic design procedure, and a light and low cost composite structure blade was designed considering fatigue life. Structural analyses including load case study, stress, deformation, buckling, fatigue life and vibration analysis were performed using the Finite Element Method.

• 신재생에너지
• /
• 제4권4호
• /
• pp.23-29
• /
• 2008

Wind farm development project contains high business risks because that a wind farm, which is to be operating for 20 years, has to be designed and assessed only relying on a year or little more in-situ wind data. Accordingly, long-term correction of short-term measurement data is one of most important process in wind resource assessment for project feasibility investigation. This paper shows comparison of general Measure-Correlate-Prediction models and neural network, and presents new method using neural network for increasing prediction accuracy by accommodating multiple reference data. The proposed method would be interim step to complete long-term correction methodology for Korea, complicated Monsoon country where seasonal and diurnal variation of local meteorology is very wide.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.58-62
• /
• 2001

Photovoltaic and wind power generation have an advantage of unlimited and unpolluted amount of energy resource. In conventional wind generation systems, since the blade rotates at low speed when the velocity of wind decreases their operations are possible only under limited conditions. Therefore they are in trouble of self-generation without the help of auxiliary generation devices outside. The system driven by the wind force in this paper consists of a generator, an invertor, batteries and sets for power storage with a spring. In this paper, the operation characteristics of system were analyzed through experiments for a trial product.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.770-771
• /
• 2007

Wind power plant is based on the wind energy so the active power is frequently changed and connected to grid according with wind condition. These characteristics are bed effect to distribution line. On this reserch, we want to analyze the quality of electric power synchro/asynchronous generation system in Dae Kwan Ryung wind farm. The contents of analysis are active/reactive power variation and total demand distortion and transiency and sag/swell phenomena. we hope this research can contribute to the power quality improvement.