• 제목/요약/키워드: wind model

검색결과 3,631건 처리시간 0.031초

An Attempt of Estimation of Annual Fog Frequency over Gyeongsangbuk-do of Korea Using Weather Generator MM5

  • Kim, Do-Yong;Oh, Jai-Ho;Kim, Jin-Young;Sen, Pumendranath;Kim, Tae-Kook
    • Environmental Engineering Research
    • /
    • 제14권2호
    • /
    • pp.88-94
    • /
    • 2009
  • In this study an attempt has been made to predict the annual foggy days over Gyeongsangbuk-do of Korea, using the regional mesoscale model (MM5). The annual meteorological conditions are simulated, and the annual and seasonal foggy days are predicted from the simulated results based on the seasonal and spatial information of the observed meteorological characteristics for fog occurrence such as wind speed, relative humidity, and temperature. Most of observed inland fog over Gyeongsangbuk-do occurs in autumn under the meteorological conditions such as a cairn, a high temperature range (above $10^{\circ}C$), and a high relative humidity (above 85%). The predicted results show the various foggy days, about 10${\sim}$60 days, depending on the season and the site locations. The predicted annual foggy days at inland sites are about 30${\sim}$60 days, but at coastal sites, about 10${\sim}$20 days. Also, a higher frequency of fog occurrence at inland sites is shown in autumn (about 60% of the annual foggy days). Otherwise, a higher frequency of fog occurrence at coastal sites is shown in summer (about 60% of the annual foggy days), unlike the inland. These annual foggy days and their seasonal variations agree reasonably well with the observed values. It can be concluded that it is possible to predict the occurrence of annual or seasonal foggy days by MM5.

도시림의 보호 및 증진관리를 위한 계획제도에 관한 연구 - 대전광역시를 사례로 - (Planning System on Conservation and Improvement of Urban Forest - A Case Study in Daejon City, Korea -)

  • 정순오
    • 농촌계획
    • /
    • 제15권4호
    • /
    • pp.135-146
    • /
    • 2009
  • Urban forest area in South Korea has been increased up to 20.8% of national land as of 2007 by the mergence of municipalities and counties. The rate of park and green tract among urban forest averages out to about 4% nationally but the Capital, Seoul, almost 105% level, not easy to split the two. Park and green has positive management system because of its infrastructure attribute and relevant security obligation standard while urban forest left alone with no such concerns. The most important reason of the negligence comes from institutional inertia although it is possible to be managed functionally by forest laws as like forests of park, landscape, wind and noise protection, and timber product. As a results, it reaches below than 92.64% of the national average level of the timber stockpile especially in the metropolitan areas and loses broad acres rapidly due to the easy conversion system to the urban land usage. Therefore, there must be required some alternative methodologies to conserve and foster it. The paper proposes the four urban forest management types and their control methods. The four types divide into conservation, foster, development, and reservation ones. Also it suggests the five furtherance tract types with the combination among the four earlier types, optionally having one of the six aim climaxes and recommends the standardization of operation design. The total green quantity index of urban forest also suggested by the weight method according to location and DBH class. The case study of the suggested model was executed on the Daejon Metropolitan area and its index calculated as 110.4% level compared with the acreage.

An Artificial Intelligence Method for the Prediction of Near- and Off-Shore Fish Catch Using Satellite and Numerical Model Data

  • Yoon, You-Jeong;Cho, Subin;Kim, Seoyeon;Kim, Nari;Lee, Soo-Jin;Ahn, Jihye;Lee, Eunjeong;Joh, Seongeok;Lee, Yang-Won
    • 대한원격탐사학회지
    • /
    • 제36권1호
    • /
    • pp.41-53
    • /
    • 2020
  • The production of near- and off-shore fisheries in South Korea is decreasing due to rapid changes in the fishing environment, particularly including higher sea temperature in recent years. To improve the competitiveness of the fisheries, it is necessary to provide fish catch information that changes spatiotemporally according to the sea state. In this study, artificial intelligence models that predict the CPUE (catch per unit effort) of mackerel, anchovies, and squid (Todarodes pacificus), which are three major fish species in the near- and off-shore areas of South Korea, on a 15-km grid and daily basis were developed. The models were trained and validated using the sea surface temperature, rainfall, relative humidity, pressure,sea surface wind velocity, significant wave height, and salinity as input data, and the fish catch statistics of Suhyup (National Federation of Fisheries Cooperatives) as observed data. The 10-fold blind test results showed that the developed artificial intelligence models exhibited accuracy with a corresponding correlation coefficient of 0.86. It is expected that the fish catch models can be actually operated with high accuracy under various sea conditions if high-quality large-volume data are available.

직사각형 프리즘 상면에서 발생되는 원추형 와의 유동구조 (Flow Structure of Conical Vortices Generated on the Roof of a Rectangular Prism)

  • 김경천;지호성;성승학
    • 대한기계학회논문집B
    • /
    • 제25권5호
    • /
    • pp.713-721
    • /
    • 2001
  • Characteristics of the conical vortices on the roof corner of a rectangular prism have been investigated by using a PIV(Particle Image Velocimetry) technique. The Reynolds number based on the free stream velocity and the height of the model was 5.3$\times$10$^3$. The mean, instantaneous velocity vector fields, vorticity fields, and turbulent kinetic energy distribution were measured for two different angles of attack, 30$^{\circ}$and 45$^{\circ}$. The PIV measurements clearly observed not only the conical main vortex and the secondary vortex but also the tertiary vortex which is firstly reported in this paper. Asymmetric formation of the corner vortex for the case of 30$^{\circ}$angle of attack produces relatively the high magnitude of vorticity and turbulent kinetic energy around the bigger vortex which generates the peak suction pressure on the roof. Fairly symmetric features of the roof vortex are observed in the case of 45$^{\circ}$angle of attack, however, the dynamic characteristics are proved to be asymmetric due to the rectangular shape of the roof.

엽온과 기온의 차이를 이용한 노지 과수의 작물 수분 스트레스 지수 산정 간편식 개발 (Development of Easy Equation for Crop Water Stress Index (CWSIEE) Using the Temperature Difference between Canopy and Air (Tc-Ta) of Fruit Trees)

  • 최용훈;이상봉;김민영;김영진;전종길;박정훈
    • 한국농공학회논문집
    • /
    • 제62권5호
    • /
    • pp.85-91
    • /
    • 2020
  • In order to calculate the Crop Water Stress Index (CWSI), it is necessary to collect weather data (air temperature, humidity, wind speed and solar radiation) and canopy temperature. However, it is not always available to have necessary data sets for CWSI calculation. Therefore, this study was aimed to develop an easy and simple CWSI equation (CWSIEE) using only two data, air and canopy temperatures. Infrared sensors and weather sensors were installed on apple and peach trees and nearby a study area and every ten-minute data were collected from June to October in 2018 and 2019, respectively. A relationship between air-canopy temperature difference and CWSI was statistically analyzed and used to develop CWSIEE using the three dimensional Gaussian model. The performance of CWSIEE against original CWSI showed R2 and NSE to 0.780 and 0.710 for apple trees and R2 and NSE to 0.884 and 0.866 for peach trees. This study found that the level of crop water stress could be easily calculated using CWSIEE with only air and canopy temperature data.

복합재 로터 블레이드의 차원축소와 복원해석을 위한 블레이드 해석 라이브러리 개발 (Blade Analysis Library Development of Dimension Reducible Modeling and Recovery Analysis for Composite Rotor Blades)

  • 장준환;이환
    • 한국항공우주학회지
    • /
    • 제43권10호
    • /
    • pp.920-927
    • /
    • 2015
  • 본 논문에서는 블레이드 해석 라이브러리를 통해 단면해석 및 응력복원 해석 결과를 VABS의 결과와 비교하였다. 강성 행렬로 연결된 1차원 보 모델을 가상일의 원리에 의해 계산된 에너지를 복원 이론에 기반한 차원 복원해석 과정을 통해 계산된 응력과 3차원 해석모델과 비교하였다. 블레이드 해석 라이브러리의 구성, 입력 및 출력 형태, 차원 축소와 복원을 통한 로터 블레이드의 구조해석 프로시져를 기술하고, 블레이드 해석 라이브러리의 검증은 고형모델, 박 벽 모델의 단면해석, 3차원 복합재료 유한요소 모델로 구성하여 VABS를 통하여 검증하였다. 차원 축소와 복원해석을 통하여 블레이드 해석 라이브러리는 복합재료 블레이드의 전후처리 프로그램와 연계되어 고고도 무인기, 로터 블레이드, 풍력 블레이드 및 틸트로터 블레이드의 모델링에 활용될 수 있을 것이다.

비선형 FEM 해석을 이용한 기존 강재 주탑기부 설계의 개선방안 연구 (A Study on the Improvement of the Steel Pylon Base Design Using Nonlinear FEM Analysis)

  • 정수형;박성우
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권1호
    • /
    • pp.19-30
    • /
    • 2014
  • 본 연구에서는 강주탑 기부와 기초콘크리트 연결 구조에 대해서 국내에서 특수교량의 강주탑 기부 설계에 보편적으로 적용하고 있는 명석해협대교(明石海峽大橋) 시방기준과 비선형 FEM 해석결과를 비교하였다. 명석해협대교(明石海峽大橋) 시방기준은 1970년도에 만들어진 일본 기준으로 주탑 기부와 PS 강봉 및 기초콘크리트를 스프링으로 선형 모델링하여 설계하는 방법으로서 43년이 지난 지금까지도 간편성을 이유로 이 기준을 적용하고 있다. 그러나 비선형 FEM 해석결과의 비교를 통해 특수 장대교의 강주탑 기부의 해석 및 설계에 이 기준을 적용하는 것은 여러 가지 문제점이 있음을 알 수 있었으며, 풍하중, 지진하중에 주요하게 저항하면서도 다양한 부재들로 복잡하게 연결된 강주탑 기부에 대해서는 한계상태설계법으로 발전하려는 현 시대에 맞추어 실제 거동을 반영하는 비선형 FEM해석을 적용해야 할 것이다.

Estimation of primary production of the waters around rack oyster farm at Wando, Korea

  • Jeong, Woo-Geon;Cho, Sang-Man
    • Fisheries and Aquatic Sciences
    • /
    • 제21권4호
    • /
    • pp.9.1-9.7
    • /
    • 2018
  • To establish a comprehensive management strategy, as part of the optimization of cultural practice for an oyster rack culture system, we used a numerical model to estimate the primary production in the waters on the eastern coast of Wando island, South Korea. The estimated primary production ranged from 17.12 to $1052.55mgC\;m^{-2}day^{-1}$ ($204.22{\pm}224.75mgC\;m^{-2}day^{-1}$ in average). Except for the times of peak phytoplankton blooms, the estimated primary production (PP) was consistently under $200mgC\;m^{-2}day^{-1}$, which is more similar to the value of PP measured off the western coast of South Korea than the southern coast. No clear relationship was observed between nitrogen content and rainfall with the exception of heavy rainfall events, indicating that precipitation might not be the main source of nutrients in these waters. No clear influence was observed from Doam tidal discharge, located 24 km north from these waters due to main tide comes in this area from the channel between Gunwe-myeon in Wando island and Pukpyeong-myeon in Haenam-gun. Because of the shallow water depth and strong tidal current, resuspension of sediments, which causes an input of nitrogen into the system, could be easily caused by even mild wind and the infrequent passing of ships. Microscopic examination of the phytoplankton composition showed additional contribution of benthic species such as Paralia sulcata into the waters, which increase the productivity of oyster farms in the waters. The availability of nitrate and phosphate for primary production was temporarily limited throughout most of the spring and autumn blooming season.

벌집형 압전 발전 소자의 구동방식에 따른 출력 특성 (A Study on the Generating Characteristics Depending on Driving System of a Honeycomb Shaped Piezoelectric Energy Harvester)

  • 정성수;강신출;박태곤
    • 한국전기전자재료학회논문지
    • /
    • 제28권2호
    • /
    • pp.69-74
    • /
    • 2015
  • Recently, energy harvesting technology is increasing due to the fossil fuel shortages. Energy harvesting is generating electrical energy from wasted energies as sunlight, wind, waves, pressure, and vibration etc. Energy harvesting is one of the alternatives of fossil fuel. One of the energy harvesting technologies, the piezoelectric energy harvesting has been actively studied. Piezoelectric generating uses a positive piezoelectric effect which produces electrical energy when mechanical vibration is applied to the piezoelectric device. Piezoelectric energy harvesting has an advantage in that it is relatively not affected by weather, area and place. Also, stable and sustainable energy generation is possible. However, the output power is relatively low, so in this paper, newly designed honeycomb shaped piezoelectric energy harvesting device for increasing a generating efficiency. The output characteristics of the piezoelectric harvesting device were analyzed according to the change of parameters by using the finite element method analysis program. One model which has high output voltage was selected and a prototype of the honeycomb shaped piezoelectric harvesting device was fabricated. Experimental results from the fabricated device were compared to the analyzed results. After the AC-DC converting, the power of one honeycomb shaped piezoelectric energy harvesting device was measured 2.3[mW] at road resistance 5.1[$K{\Omega}$]. And output power was increased the number of harvesting device when piezoelectric energy harvesting device were connected in series and parallel.

이차원 타원형 날개꼴의 실속제어에서 간헐제트 브로잉의 효과 (Effects of Pulsating Jet Blowing on Stall Control of Two Dimensional Elliptic Airfoil)

  • 이기영;손명환;정형석
    • 한국항공우주학회지
    • /
    • 제33권9호
    • /
    • pp.1-8
    • /
    • 2005
  • 이차원 타원형 날개꼴에서 펄스제트 브로잉에 의한 박리 제어 효과에 대하여 연구하였다. 박리 유동의 능동제어기술 개발을 위하여 압축공기를 사용하는 연속제트/간헐제트 엑츄에이터를 설계제작하여 타원형 날개 풍동 실험 모델에 장착하였다. 아음속 유동에서 날개 주위 유동장의 PIV 측정과 유동의 가시화을 통하여 간헐제트 브로잉의 타원형 날개의 실속제어 효과와 실용성에 대해 실험연구를 수행하였다. PIV 실험 결과 제트 브로잉에 의해 난류 후류 영역과 박리 버블의 크기를 현저하게 감소시킴으로써 박리제어가 가능함을 보였다. 간헐제트는 연속제트보다 박리제어에 보다 효과적이었다. 간헐제트의 주파수를 증가시키면 보다 높은 받음각에 이르기까지 난류 박리 후류를 효과적으로 억제할 수 있었다.