• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.66-71
• /
• 2021

The resonance characteristics of H-shaped metamaterials, whose widths were varied while keeping the height constant, were investigated in the terahertz (THz) frequency range. The H-shaped metamaterials were numerically analyzed in two modes in which the polarization of the incident THz electric field was either parallel or perpendicular to the width of the H-shaped structure. The resonant frequency of the metamaterial changed stably in each mode, even if only the width of the H shape was changed. The resonant frequency of the metamaterial operating in the two modes increases without significant difference regardless of the polarization of the incident electromagnetic wave as the width of the H-shaped metamaterial increases. The electric field distribution and the surface current density induced in the metamaterial in the two modes were numerically analyzed by varying the structure ratio of the metamaterial. The numerical analysis clearly revealed the cause of the change in the resonance characteristics as the width of the H-shaped metamaterial changed. The efficacy of the numerical analysis was verified experimentally using the THz-TDS (time-domain spectroscopy) system. The experimental results are consistent with the simulations, clearly demonstrating the meaningfulness of the numerical analysis of the metamaterial. The analyzed resonance properties of the H-shaped metamaterial in the THz frequency range can be applied for designing THz-tunable metamaterials and improving the sensitivity of THz sensors.

• 한국산업융합학회 논문집
• /
• 제24권6_1호
• /
• pp.683-691
• /
• 2021

Bipolar plates with channel width of 0.5 mm, 0.4 mm, and 0.3 mm respectively were printed using a 3D printer. The shape of three b ipolar plates was rectangular, the channel depth was 0.5 mm, and the thickness of base was 0.5 mm. The bipolar plate with channel width of 0.5 mm had 45 channels, and their active area was 44.5 mm × 50 mm. The bipolar plate with channel width of 0.4 mm had 57 channels and its active area was 45.2 mm × 50 mm, and the bipolar plate with channel width of 0.3 mm had 75 channels and its active area was 44.7 mm × 50 mm. The bipolar plates were printed using PLA filament. The cross-sectional lengths of the bipolar plates with channel widths of 0.5 mm and 0.4 mm were identical by 96% of the designed cross-sectional length. Whereas the bipolar plate with a channel length of 0.3 mm had a large difference of 25% from the designed cross-sectional length.

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.819-830
• /
• 2022

This paper presented an experimental study of the bond-slip behavior of reactive powder concrete (RPC)-filled square steel tube. A total of 18 short composite specimens were designed forstatic push-out test, and information on their failure patterns, load-slip behavior and bond strength was presented. The effects of width-to-thickness ratio, height-to-width ratio and the compressive strength of RPC on the bond behavior were discussed. The experimental results show that:(1) the push-out specimens remain intact and no visible local buckling appears on the steel tube, and the interfacial scratches are even more pronounced at the internal steel tube of loading end; (2) the bond load-slip curves with different width-to-thickness ratios can be divided into two types, and the main difference is whether the curves have a drop in load with increasing slip; (3) the bond strength decreases with the increase of the width-to-thickness ratio and height-width ratio, while the influence of RPC strength is not consistent; (4) the slippage has no definite correlation with bond strength and the influence of designed parameters on slippage is not evident. On the basis of the above analysis, the expressions of interface friction stress and mechanical interaction stress are determined by neglecting chemical adhesive force, and the calculation model of bond strength for RPC filled in square steel tube specimens is proposed. The theoretical results agree well with the experimental data.

• 한국광학회지
• /
• 제15권4호
• /
• pp.293-298
• /
• 2004

Double-Sided Deep-Ridge(DSDR) 수직 방향성 결합기의 날개구조부 폭과 두께가 편광에 따른 결합길이에 미치는 영향에 관하여 연구하였다. 날개구조부가 존재하지 않는 DSDR 수직 방향성 결합기는 편광에 무관한 결합길이를 가질 수 없음을 볼 수 있었다. 일정한 날개구조부 두께에 대하여 날개구조부 폭이 특정 길이 이상이 되면 TE 모드와 TM 모드의 결합길이의 변화는 거의 없으며 또한 두 모드의 결합길이의 차이도 거의 발생하지 않음을 볼 수 있었다. 따라서 편광에 무관한 결합길이를 가지는 DSDR 수직 방향성 결합기를 구현하기 위한 최소 날개구조부 폭이 존재함을 볼 수 있었다. 이러한 최소 날개구조부 폭은-같은 코어 두께에 대해서는 날개구조부 두께가 증가할수록, 같은 날개구조부 두께에 대해서는 코어 두께가 감소할수록-증가함을 볼 수 있었다. 또한 최소 날개구조부 두께는 코어의 두께에 의하여 결정됨을 볼 수 있었고 코어의 두께가 증가할수록 최소 날개구조부 두께는 감소함을 볼 수 있었다.

• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.510-521
• /
• 2006

본 연구는 총생에 영향을 미치는 중요한 요소가 무엇인지 알아보기 위해 시행하였으며 총생군 50명(남녀 각 25명)과 정상 교합군 40명(남녀 각 20명)에서 상하악 모형을 제작하여 이를 3D model로 변환하였으며 컴퓨터 상에서 치아의 근원심폭경과 악궁의 길이 변연길이, 견치간 폭경, 구치간 폭경을 계측 및 분석하여 다음과 같은 결론을 얻었다. 1. 치아크기 분석시 상악에서는 측절치와 제1,2소구치에서 총생군의 치아가 더 크게 나타났으며(P<0.05) 나머지 치아의 크기 및 치아크기합계에서는 차이가 없었다(P>0.05). 2. 하악에서는 중절치와 견치 및 제 1,2 소구치의 크기 그리고 치아크기합계에서 군간에 차이가 관찰되었다(P<0.05). 3. 악궁에 대한 평가시 상악에서는 악궁 변연길이와 구치간 폭경은 총생군에서 더 작았고 견치간 폭경은 총생군에서 더 컸으며 (P<0.05), 악궁의 장경에 있어서는 차이가 없었다(P>0.05). 4. 하악에서는 악궁 변연길이는 총생군에서 더 작았으나(P<0.05), 악궁의 장경 및 구치간 폭경, 견치간 폭경에서는 차이가 인정되지 않았다(P>0.05). 5. ALD와 각 변수간의 상관관계를 분석한 결과 상악에서는 악궁 변연길이와$({\gamma}=-0.348)$ 구치간 폭경 $({\gamma}=-0.343)$, 소구치크기와$({\gamma}=-0.335)$ 비교적 높은 상관관계를 보였고 하악에서는 치아크기합계를$({\gamma}=-0.454)$ 비롯한 모든 치아크기와 높은 상관관계를 보였다. 6. 석고모형 계측치와 삼차원모형 계측치를 비교한 결과 석고모형에 비해 삼차원모형 계측치가 좀더 크게 계측되었으며 (P<0.05), 오차의 범위는 0.01-0.47mm이었다. 7 검사자내의 오차를 분석하기 위해 상관분석을 시행한 결과 석고모형 계측시 보다 삼차원모형 계측치의 재현도가 높음을 알 수 있었다(P<0.05). 이상의 결과를 종합하여 볼때, 총생이 존재할 때 상악에서는 큰 치아와 좁은 악궁이 복합적으로 기여하며 하악에서는 치아 크기가 더 중요한 요소로 작용하는 것으로 생각된다. 또한 본 연구에서 사용된 삼차원모형은 현재 적절하게 사용가능하지만 향후 개선 보완이 필요할 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제16권1호
• /
• pp.9-20
• /
• 1988

Lespedeza species have been widely used not only as plant resources for bark, leaves and honey, but also as erosion control materials. This study was carried out to investigate the structural and wood tiber characteristics in order to obtain basic information for the utilization of the wood. The wood structure was investigated for 10 selected species and the wood fiber, for the 5 selected species among Lespedeza species distributed all over the country. The following results were obtained. In the cross section, campylotropis showed ray diffuse porous wood, L. bicolor, L. cyrtobotrya, L. thunbergii var. intermedia, diffuse porous wood, and L. tomentella, L. angustifolioides. L. maritima, L. robusta, L. patentibicolor, ring porous wood. The maximum diameter of a single vessel ranged 66-123 ${\mu}$ in all species. Campylotropis showed the most number of vessels, L. angustifolioides, the least. The number of ray per mm ranged 7-22, Campylotropis showed the most number of rays, L. angustifolioides, the least. In the radial section the average length of vessel ranged 121-250 ${\mu}$ in all species. L. thunbergii var. intermedia showed the longest vessel, L. tomentella, the shortest. In tangential section the average width of the uniseriate ray ranged 9.2-14.7${\mu}$, that of the multiseriate ray, 19.2-42.1 ${\mu}$. The average height of the uniseriate ray ranged 143.0-1162.0 ${\mu}$. The width of fiber ranged 10.12-13.61 ${\mu}$, L. maximowiezii showed the narrowest tiber, L. thunbergii var. intermedia. the widest, the thickness of fiber wall ranged 2.93-3.71 ${\mu}$ in the five species. L. maximowiezii showed the most thin fiber wall, L. thunbergii var. intermedia, the thickest, L. cyrtobotrya showed the difference in the size of fiber between the shade and the sunny sites but L. maximowiezii showed no difference. There was significant difference in fiber length, fiber width and wall thickness between L. eyrtobotrya and L. maximowiezii.

• 한국약용작물학회지
• /
• 제25권3호
• /
• pp.160-164
• /
• 2017

Background: This study were performed to determine the effect of root pruning of Zizyphus jujuba var. inermis (Bunge) Rehder. Root cutting inhibit vegetative growth and promote reproductive growth as temporarily reducing growth, net assimilation, water potential of leaf and cytokinin level. Methods and Results: The root pruning was treated of the root cutting widths 50, and 80 ㎝ and the root cutting depths 10, and 20 cm. The amount of root pruning and the number of suckers were the highest in the root-pruning treatment at a width of 50 cm and a depth of 20 cm. The blooming time was from June 18 to 20, and no difference was observed in the blooming time among the root-pruning treatments. The number of flowers was rather higher in the root-pruning treatment at a width of 50 cm and a depth of 20 cm and at a width of 80 cm and a depth of 20 cm. The percentage of fruit setting was higher in the plants whose roots were pruned at a depth of 20 cm than in the untreated plants. The fruit size, fruit weight, and sugar content showed no difference among the root-pruning treatments. Conclusions: The results showed that percentage of fruit setting increased with root pruning, while no difference was observed in the growth and fruit quality of plants.

• 한국자원식물학회지
• /
• 제36권3호
• /
• pp.225-236
• /
• 2023

Stomatal traits such as stomata density (SD), aperture length (APL) and width (APW), guard cell length (GCL) and width (GCW), and distance between stomata (DIS) were investigated to identify correlation with agronomic traits for 35 Korean wheat cultivars. Flag leaf width (FLW) of Korean wheat cultivars was the widest in Ol-mil, and the narrowest in Keumkang. SD tended to be higher on the adaxial side than on the abaxial side in Korean wheat cultivars. SD of adaxial and abaxial sides was classified into a cultivar with a significantly different or not. In APL, 18 wheat cultivars showed significant differences according to leaf side, and APL of adaxial was longer than APL of abaxial in 13 wheat cultivars. In APW, 15 wheat cultivars showed a significant difference, and APW of abaxial was wider than APW of adaxial among them. In GCL, 14 wheat cultivars showed a significant difference, and the GCL of abaxial was longer than the GCL of adaxial in 10 wheat cultivars. In GCW, 10 wheat cultivars showed a significant difference, GCW of adaxial was wider than GCW of abaxial and in 6 wheat cultivars. FLW of adaxial and abaxial showed a negative correlation with GCL and a positive correlation with grain number per panicle. FLW of only abaxial showed a positive correlation with DIS. The SD of the adaxial showed a negative correlation with GCL, while the SD of the abaxial showed a negative correlation with APL. APL of both sides of the leaf showed a positive correlation with GCL, and APW of only abaxial showed a negative correlation with GLC. DIS of adaxial showed a negative correlation with tiller number (TN), while DIS of abaxial showed a positive correlation with GNP.

• 대한치과교정학회지
• /
• 제26권6호
• /
• pp.647-655
• /
• 1996

In discussing the effects of adenoids on the development of the face and dentition, it is important to note their influence on the mode of breathing and to relate this to specific facial types and dentition. This study, therefore, assumed that the ability to adapt to individual's neuromuscular complex is various. And tried to investigate the effects of reduced nasal respiratory function on the development of dentition by facial type. This paper is based on children patients with enlarged adenoids and comparing them to data taken from a control group with normal respiratory function. Among the three facial types, the most statistical significant difference was observed from dolichofacial type between experimental and control group. In dolichofacial type, the experimental group showed labioversion of upper incisor, decrease in the width of upper arch, increase in overjet, increase in the rate of cross-bite, and increase in the height of palatal vault. No significant difference was observed between the two groups in the inclination of upper and lower incisors in mesofacial type, but the experimental group was observed to show decrease in the width of upper arch and increase in the height of palatal vault. On the other hand, in brachyfacial type, no significant difference was observed between the two groups in dentition variables except showing linguoversion of upper incisor. The results, which were observed in dolichofacial type, consist with Nordlund's theory of Compression.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.105-121
• /
• 2006

Body measurement was first made with the subjects of 193 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this first report, lower body shapes were classified and discriminated by using anthropometric measurement indices and lower body analysis. The following sums up the research: 1. Compared with the average values of Korean males in their 20s, the Chinese subjects were characterized with thinner waist, more flat hip, and smaller midthigh. 2. The subjects of Chinese males in their 20s showed three types of lower bodies: H-Round Type (25.91%)-thick waist-abdomen, round cross-section waist-abdomen, and small waist-hip difference. A-Trapezoid Type (34.72%)-small width of omphalion waist-abdomen, average cross-section waist-abdomen, and large waist-hip difference. A-Balance Type (39.38%)-average width of omphalion waist-abdomen, flat cross-section waist-abdomen, and large waist-hip difference. 3. Seven useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 96.89%.