• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2004년도 제29회 추계학술대회 발표논문집
• /
• pp.126-129
• /
• 2004

Leaf width가 다른 다엽 콜리메터 (MLCs)를 이용한 강도변조 방사선 치료 (IMRT)계획을 비교하였다. micro-MLCs를 사용하여 이미 시행된 12 case를 Varian사의 120 MLC와 80 MLC를 사용하여 다시 치료계획 하였다. 이들 콜리메터는 중심에서의 leaf width가 각각 3 mm, 5 mm, 10 mm이다. 이 치료계획들을 uniformity index, conformity Index, 정상조직 내선량으로 서로 비교하였다. PTV의 uniformity Index경우, mMLCs와 120 MLCs가 통계적으로 차이가 없었다 (p = 0.06). 그러나 mMLCs와80 MLCs는 통계적으로 약간의 차이를 보였다 (p = 0.001). PTV에 대한 최대목표선량은 leaf width와 연관성이 없었다. conformity index의 경우, mMLCs와 120 MLCs (p = 0.003)에서, mMLCs와 80 MLCs (p = 0.003)에서 통계적인 차이를 보였다. leaf width의 변화에 따라 방사선에 조사되는 정상조직의 부피를 비교하였고, leaf width가 3mm인 경우 정상조직 보존에 보다 적합함을 확인하였다.

• 한국의상디자인학회지
• /
• 제5권1호
• /
• pp.13-24
• /
• 2003

The purpose of this study is to design Jugori model compatible with the body types of the middle-aged women especially from 40 to 59 years old. The result is as follows: We decided five items as the necessary items for designing jugori model : the bust girth (the breast & shoulder width), the B.P length, the neck width, the armhole circumference, and Hwa-jang. The breast & shoulder width are the size that comes out if the bust is divided by the breast & shoulder width on the basis of the side line, and Hwa-jang is a length measured with arms stretched out to 0° direction. With each person's physical characteristics considered, the application of the size of each body types and body parts is as follows: 1. The breast & shoulder width (1/4 portion) : We decided B/4+2cm as a standard size and, we adjusted the extra room on the basis of the discrepancy between the breast width and the shoulder width to make it fit well to the each body type. For the breast width (1/2 portion), we bisected the difference between the breast width and the shoulder width of the bust, and moved Gut-sup to the center of the Sup and Sup-sun for An-sup. According to the body type, the movement of the Sup for the people with big breasts gets bigger because there should be a big difference between the breast width and the shoulder width for them, and for the people with small breasts the movement will be relatively smaller. For the shoulder width (1/2 portion), we curved the back center line after we shortened as much as the difference between the amount of the shoulder width/2+1cm and of B/4+2cm. The movement of back center line will be bigger for a person with leaned-backward body type. 2. The front & back length: We made the front length to B.P length+2.5cm to have Jugori cover the breast point fully around the bust line, which is a vogue nowadays. For an upright body type, we decided the back length as (AH/2.2)+5cm. And for a bent-forward and a leaned-backward body type, we adjusted the calculation formulae differently taking the physical characteristics into account. We decided the back length (A) as (A.H/2.2)+5cm, and the front length (B) as the back length+5cm. So, (A+B) is the sum of the front length and the back length. Going back to the original formula, the front length is B.P+2.5cm. So, we can decide the back length if we subtract B.P+2.5cm from the sum of the front length and the back length. To make well-fit Jugoris, the front & back length are areas that we should pay attention to if we take each person's physical characteristics into consideration. 3. Go-dae (1/2 portion) : We decided Go-dae as the neck width/2+0.5cm. For an upright body type, because the base line which went down vertically from the tragion was straight, we generally decided Go-dae Dalim line as 1.0cm. But we decided Go-dae Dalim line down to 1.5cm for bent-forward type and up to 0.2cm for leaned-backward type because the upper half of the body of them was bent forward or leaned backward from the base line. 4. The armhole : We decided the armhole circumference as A.H/2+2cm with the whole extra room of 4cm. 5. The side line length : We can calculate the side line length to (the back length-the armhole)/2, and, in terms of the trend, 2.5cm will be appropriate.

• 한국의류산업학회지
• /
• 제18권1호
• /
• pp.71-79
• /
• 2016

This study aims to suggest the proper neck-width of slim-fit jackets according to numbers of jacket buttons from an one-button jacket to a four button jacket for men in their 30's. The researchers carried out both an appearance evaluation and a movement functionality evaluation. When analyzing the appearance evaluation, there were meaningful differences. The one-button jacket showed a high score on the back-neck width of +2.4cm. The two-button jacket and the three button jacket showed a high score on the back-neck width of +1.4cm. The four-button jacket showed a high score on the back-neck width of +0.4cm. The result of movement functionality evaluation was not related to the appearance evaluation, and showed no meaningful difference. The one-button jacket and two button jacket showed high scores on the back-neck width of +2.4cm. The three button jacket showed a high score on the back-neck width of +1.4cm. The four-button jacket showed a high score on the back-neck width of +0.4cm. In analyzing both results, the study suggests that the proper front neck-width and that of the back-neck width of +2.4cm be for the one-button jacket, the back-neck width of +1.4cm be for the two-button jacket and the three-button jacket, while the back-neck width of +0.4cm be for the four-button jacket.

• 대한치과교정학회지
• /
• 제53권2호
• /
• pp.99-105
• /
• 2023

Objective: The study aimed to evaluate the changes in mandibular width after sagittal split ramus osteotomy (SSRO) in patients with mandibular asymmetric prognathism using cone-beam computed tomography (CBCT). Methods: Seventy patients who underwent SSRO for mandibular setback surgery were included in two groups, symmetric (n = 35) and asymmetric (n = 35), which were divided according to the differences in their right and left setback amounts. The mandibular width was evaluated three-dimensionally using CBCT images taken immediately before surgery (T1), 3 days after surgery (T2), and 6 months after surgery (T3). Repeated measures analysis of variance was applied to verify the differences in mandibular width statistically. Results: Both groups showed a significant increase in the mandibular width at T2, followed by a significant decrease at T3. No significant difference was observed between T1 and T3 in any of the measurements. No significant differences were found between the two groups (p > 0.05). Conclusions: After mandibular asymmetric setback surgery using SSRO, the mandibular width increased immediately but returned to its original width 6 months after surgery.

• 대한가정학회지
• /
• 제29권3호
• /
• pp.23-34
• /
• 1991

With 10 subjects of 6-year-old children residing in Pusan, I analyzed the relation of walking types(step angle, step width, step and stride) and wear comfort according to the style and size fo shoes in order to reveal the fitness of children's shoes centered on the relationship of shoes size and walking. Three styles of children's shoes(laced and unlaced formal shoes, magic-taped sports shoes) ranging in five different size were used. The following are conclusions. 1. As to step angle, there was no conceivable change in the left side, while the right side had a significance in accordance with the shoes size at p<0.001. As the size grew, right step angle of all shoes increased, with unlaced shoes having more influence than others. Step angle were the smallest when all the sampled shoes made the difference of 5mm between foot size and shoes size. 2. As to step width, there was no conceivable change in the style of shoes, while shoes size had a significance at p<0.001. As the size grew, step width also increased. Step width were the smallest when all the sampled shoes made the difference of 5mm between foot size and shoes size. 3. Step and stride, however, took no significance at all, since they were not influenced by the size or style of the shoes. 4. Wear comfort had a significance at the level of p<0.001. Since it was influenced by the size or style of the shoes. The best wear comfort was felt when all the sampled shoes had laces and magic tapes as well as the size with the difference of 5-10mm between foot size and shoes size.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• 한국항행학회논문지
• /
• 제28권1호
• /
• pp.116-122
• /
• 2024

본 논문에서는 ILS (instrument landing system) 로컬라이저 전력증폭기의 변조도, 출력, 그리고 위상 변화량 규격의 요구성능을 도출하기 위하여, 시스템의 주요 성능 중에서 course structure와 course width를 연구하였다. Course structure의 편차 규격(± 5 uA)을 만족하기 위한 CSB (carrier with sideband) 증폭기의 변조신호 DDM (difference in depth of modulation) 편차 규격을 ± 1 uA(0.001 DDM)로 규격화하였다. CSB 30 W 전력증폭기를 설계하였고, 변조도 보상회로를 통하여 동작운용 출력범위(45 dBm ~ 35 dBm)에서 SDM (sum in depth of modulation)은 40% ± 0.1%, DDM은 ± 0.0005 DDM의 특성을 얻었다. 그리고 course width와 displacement sensitivity 규격에 대하여 시뮬레이션으로 분석하고, 가장 엄격한 규격인 운용개시 점검시에 적용되는 ± 0.1 ° 변화량을 적용하여, SBO (suppressed with sideband only) 증폭기의 출력변동은 ± 2 mW, 위상은 ± 3 ° 로 규격화하고 특성을 만족하였다. 출력과 온도에 따른 보상회로를 적용하여, 안정적인 변조지수, 출력, 그리고 위상 특성을 얻었다.

• 대한방사선치료학회지
• /
• 제23권2호
• /
• pp.109-117
• /
• 2011

목 적: 호흡에 의하여 영향을 받는 장기의 토모 치료 시 선속 폭(Field Width) 변화에 따른 종양 용적선량의 선량 전달 정확성을 분석하고 자체 제작한 Moving car를 사용하여 선량 변화의 차이를 확인하고 실질적인 종양 선량의 전달 선량을 평가해 보고자 한다. 대상 및 방법: 자체 제작한 Moving car를 사용하여 종축 움직임 차이(0.0 cm, 1.0 cm, 1.5 cm, 2.0 cm)를 적용하고 선속 폭(Field Width) 변화(1.05 cm, 2.50 cm, 5.02 cm)에 따른 측정된 선량의 값을 계산된 선량 값과 비교하여 오차범위를 파악하였다. Gafchromic EBT 필름을 이용하여 측정한 DQA (Delivery Quality Assurance) 필름의 감광정도를 선량윤곽(Dose Profile)과 Gamma Histogram을 이용하여 비교 분석하였다. 결 과: 선속 폭(Field Width) 1.05 cm, 2.50 cm, 5.02 cm일 때 오차범위가 각각 -2.00%, -0.39%, -2.55%의 선량 전달율을 나타내었다. Gafchromic EBT 필름 분석의 선량 윤곽(Dose profile)에서는 Moving car의 움직임이 있는 상태에서 종축방향으로의 움직임이 클수록, 선속 폭(Field Width)이 좁아질수록 고선량 부분에서 계산된 선량과의 오차가 크게 나타났다. Gamma histogram에서는 gamma index가 선속 폭(Field Width)이 좁을수록 움직임의 영향이 상당히 증가하는 것을 알 수 있었다. 결 론: 자체 제작한 Moving car를 이용하여 움직이는 장기의 종축선량 차이를 확인할 수 있었으며 토모 치료 시 선속 폭(Field Width)을 작게 하고 호흡에 의한 장기의 움직임을 최소화하기 위하여 호흡조절 장치와 고정기구의 개발이 필요하리라 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제24권1호
• /
• pp.15-25
• /
• 1994

Keratinized ginigva has clinical singificance in periodontal health because it plays important roles in resistance to mechanical trauma, to penetration of bacteria, and to tensional stress by muscle attachment. In order to investigate the width change of anterior keratinized gingvial during transitional period, the width of kerainized gingiva on anterior teeth was measured annually in elementary school children with deciduous dentition until the successive anterior teeth were completely erupted. The distance from the gingival margin on mid-portion of crown to mucogingival junction was measured by Boley gauge(Hu-Friedy, U.S.A.) and was recorded as the width of keratinized gingiva. The difference of the width of keratinized gingiva according to sex and dentition was analyzed statistically by Student t-test. Following results were obtained : 1. In deciduous dentition, it was shown that the width of keratinized gingiva on maxillary central incisors($3.28{\pm}0.83mm$) was the widest(p<0.01), and that on maxillary lateral incisors, mandibular central and lateral incisors was $2.69{\pm}0.86mm$, $2.51{\pm}0.71mm$, $2.43{\pm}0.68mm$, respectively. 2. In mixed dentition, it was shown that the width of keratinized gingiva on maxillary central incisors ($5.10{\pm}0.86$) was the widest(p<0.01), and that on maxillary lateral incisors, mandibular central and lateral incisors was $4.35{\pm}0.83mm$, $3.51{\pm}0.60mm$, $3.57{\pm}0.66mm$, respectively. 3. The width of anterior keratinized gingiva was significantly increased after the successive anterior teeth were completely erupted(p<0.001). The width of keratinized gingiva on maxillary central and lateral incisors, and mandibular central and lateral incisors was increased by $1.82{\pm}0.83mm$, $1.65{\pm}0.69mm$, $0.99{\pm}0.39mm$, and $1.14{\pm}0.98mm$, respectively. 4. There was no statistical significance in the difference of the width of anterior keratinized gingiva between male and female(p>0.05).

• 콘크리트학회논문집
• /
• 제20권4호
• /
• pp.459-467
• /
• 2008

이 논문은 철근콘크리트 휨부재의 균열폭과 처짐 계산에 대한 해석적 모델을 제안한 것이다. 균열 안정화단계에서 철근과 콘크리트 경계면에서 발생하는 실제와 유사한 형태의 부착응력-미끌림 관계와 인장증강효과를 수치적으로 유도한 후, 균열과 균열 사이에서 철근의 매입길이 방향으로 발생하는 철근과 콘크리트의 변형률 차이가 균열면으로 누적되는 양을 계산할 수 있는 평형방정식을 이용하였다. 이로부터 두 재료의 변형량 차이로부터 평균 균열폭을 계산할 수 있는 모델과 인장증강효과를 반영한 철근의 평균변형률과 모멘트-곡률 관계를 도입하여 처짐을 계산하는 모델을 제안하였다. 이렇게 정식화된 새로운 균열폭 및 처짐 모델을 기존 문헌에 발표된 여러 연구자들의 실험자료에 적용하여 그 정확성을 검증한 결과, 제안식에 의한 예측값은 현재 사용되고 있는 여러 설계기준의 사용성 규정으로 계산한 결과와 비교할 때 실험값을 비교적 정확하게 예측하는 것으로 나타났다.