• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.45-46
• /
• 2006

We have studied the viewing angle control using a twist nematic liquid crystal display (TN-LCDs). These TK-LCDs have the characteristics, of which is not good image quality, for examples low Contrast ratio and gray scale inversion problems at upper and down viewing direction. TN-LCDs have the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively. Consequently, this device is compatible with two image performances of which the wide viewing angle mode and Narrow viewing angle mode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.49-50
• /
• 2006

We have developed vertical alignment liquid crystal display (VA-LCD), of which the viewing angle can be controlled. The VA-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using one homogeneous aligned (HA) LC layer and one compensation film with a negative C-plate. The retardation of the HA layer at off axis can be controlled by applying an electric field while keeping the retardation value to be zero at normal direction. Consequently, the device exhibits a viewing mode over $170^{\circ}$ in terms of CR = 10 in wide viewing mode and about $60^{\circ}$ in terms of CR = 2 in narrow viewing angle mode m horizontal direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.479-480
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and gray scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.53-54
• /
• 2006

We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and grey scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.19-23
• /
• 2009

In this paper, we review the proposed liquid crystal display (LCD) with a tunable viewing angle consisting of a conventional liquid crystal display (LCD) panel and a thermally variable retardation layer (TVRL) characterized by uniformly aligned LC film with transparent indium-tin-oxide electrodes for Joule heating. In the TVRL, nematic phase is transitioned into isotropic by Joule heating. The numerical calculation showed that the intrinsic wide viewing angle was achieved at the isotropic phase of the TVRL by Joule heating, whereas the narrow viewing angle was obtained at the nematic phase of the TVRL. The simulated and experimental results of the proposed LCD show continuous and symmetrical viewing angle characteristics by tuning the retardation of TVRL using Joule heating. The structure of the viewing angle control proposed here is adoptable to all LCD modes with wide viewing angle characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.883-886
• /
• 2000

We have developed a novel vertical-alignment(VA) - 1/6$\pi$ mode that provides a wide viewing angle for nematic liquid crystal (NLC) with negative dielectric anisotropy on a homeotropic polyimide (PI) surfaces. Good voltage-transmittance curves were achieved with the new VA - 1/6$\pi$ cell model without a negative compensation film. The viewing angle of a new VA -1/6$\pi$ cell without a negative compensation film was wider than that of a conventional VA cell. Finally, the wide viewing angle using the new VA-1/6$\pi$ cell mode can be achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.345-348
• /
• 2005

In this paper we propose a configuration for an optically compensated bend (OCB) mode using circular polarizers with wide-band wide-viewing-angle (WBWA) quarter-wave plates (QWPs). Parameters of LC material and compensation films are optimized for wide viewing angle characteristics and excellent spectral properties of the OCB mode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.54-57
• /
• 2001

We have developed a new multidomain vertical-alignment (MVA) mode using a homeotropic photopolymer that provides a wider viewing angle for nematic liquidcrystal (NLC) with negative dielectric anisotropy. Good voltage-transmittance curves for he new MVA cell using the homeotropic photopolymer were observed. The viewing angle of the new MVA cell using the homeotropic photopolymer was wider than that of the conventional VA cell. The wide viewing angle using the new MVA cell is attributable to 4-domain by the ribs with UV exposure on the photopolymer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.699-702
• /
• 2006

We have developed twist nematic liquid crystal displays (TN-LCDs), of which the viewing angle can be controlled. The TN-LCDs have the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively. In this way, the viewing angle range in terms of contrast ratio 5:1 can be switched from $120^{\circ}$ to $60^{\circ}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1462-1465
• /
• 2009

Because of its weak points that narrow viewing angle and grayscale inversion, 'bare' twisted nematic (TN) LCD has some limits to use as a display device, though its great strong points that low cost, high yield, simple design, high transmittance and normally white. The 'WideView(WV)' film which introduced by Fuji co., has been good solution to extend the viewing angles of TN mode, therefore that film have been used generally for TN panels needed wide viewing angle. This paper introduce the research to find the parameters of the Wide view film and a TN panel which affect viewing angle characteristics and how to adjust those parameters.