• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.278-290
• /
• 2016

Maximum traffic flow rate is an important performance measure of operational status in transport networks, and has been considered as a key parameter for transportation operation since a bottleneck in congestion decreases maximum traffic flow rate. Although previous studies for traffic flow analysis have been widely conducted, a detection method for changes in dynamic traffic flow has been still veiled. This paper explores the dynamic traffic flow detection that can be utilized for various traffic operational strategies. Turning point analysis (TPA), as a statistical method, is applied to detect the changes in traffic flow rate. In TPA, Bayesian approach is employed and vehicle arrival is assumed to follow Poisson distribution. To examine the performance of the TPA method, traffic flow data from Jayuro urban expressway were obtained and applied. We propose a novel methodology to detect turning points of dynamic traffic flow in real time using TPA. The results showed that the turning points identified in real-time detected the changes in traffic flow rate. We expect that the proposed methodology has wide application in traffic operation systems such as ramp-metering and variable lane control.

• International Journal of Highway Engineering
• /
• v.5 no.3 s.17
• /
• pp.31-42
• /
• 2003

The KHC Test Road project was initiated on 1991 to develop Korean Pavement Design Guide. It was constructed along the Joongbu Inland Expressway line between Yeoju and Gamgok. It is two-lane wide expressway containing fifteen asphalt and twenty-five Portland cement concrete test pavement sections. Various sensors were installed in the Test Road to evaluate the behavior of test pavement sections under the influence of traffic load and environmental change. The most important issues in the sensor installation are the accurate location and long-term survivability. They are directly influenced by the sensor installation methodology. The methodology for asphalt strain gages is mainly discussed in this paper because it is the second important sensors in the KHC Test Road project. In order to find the best methodology, we evaluated existing methodology from prior experience and several conducted test installations. We have tried mound, block out, and trench cuts since 2000. Among three methods, block out was the most effective one in terms of accurate location, long-term survivability, and material homogeneity. However, this method cannot be applied to the wearing coarse so that the mound method was used as an alternative. The block out method was applied to base and intermediate layers while the mound method was used to the wearing coarse. Three hundred seventy-four asphalt strain gauges were installed on asphalt pavement sections from September 3rd to November 18th in 2002. According to the sensor measurement evaluation, 6.3% of sensor demonstrated over ranged readings for mound method installation and 2.5% did for block out method installation. We lost only two sensors during the installation. It is 99.5% survival and it is excellent survival rate according to other experience.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.107-122
• /
• 2016

This study aims to develop a framework to estimate mobile source emissions with the macroscopic travel demand model including enhanced estimates of intra-zonal travel emissions using Space Syntax analysis. It is acknowledged that "the land-use and transportation interaction model explains the influence of urban structure on accessibility and mobility pattern". Based upon this theory, the estimation model of intra-zonal travel emissions is presented with the models of total travel distance, total travel demand, and average travel speed of intra-zonal trips. Thess statistical models include several spatial indices derived from the Space Syntax analysis. It explains that urban spatial structure is a critical factor for intra-zonal travel emissions, which is lower in compact zone with smaller portion of land area, lower sprawl indicator, and more grid-type of road network. Also the suggested framework is applied in the evaluation of the effectiveness of bicycle lane project in Suwon, Korea. The estimated emissions including intra-zonal travel is as double as the results only with inter-zonal demands, which shows better performance of the suggested framework for more realistic outcomes. This framework is applicable to the estimation of mobile source emissions in nation-wide and the assessment of transportation-environment policies in regional level.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.287-301
• /
• 2009

The novel cut-and-cover tunnel construction method using rib-reinforced pre-cast arch segments has been recently developed and applied for practice to secure a structural stability of high covering and wide width section tunnels. Cut-and-cover tunnels are usually damaged by the seismic behavior of backfill grounds in case of a low covering condition. Seismic analyses are performed in this study to characterize the dynamic behavior of rib-reinforced pre-cast arch cut-and-cover tunnels. Seismic analyzes for 2 lane cast-in-place and rib-reinforced pre-cast arch cut-and-cover tunnels are carried out by using the commercial FDM program (FLAC2D) considering various field conditions such as the covering height embankment slope and excavation slope. It can be concluded that the amplification of seismic wave is reduced due to an increase in the structural stiffness induced by rib-reinforcement. The results show that the rib-reinforced pre-cast arch cut-and-cover tunnels are more effective against the seismic loading, compared to the cast-in-place cut-and-cover tunnels.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.85-95
• /
• 2008

The City of Seoul enforces the 'Median reserved bus lane', a revised public transportation system, in order to achieve both a faster and more convenient transit system. This study examines the visual image and preference of the median bus stops in accordance with the operation of the median reserved bus lanes. In order to evaluate and clarify the distinct landscape of each bus stop in a different environment, our team selected 3 representative bus stops with different environments on main roads and conducted landscape simulations so as to evaluate visual preference. The sites were on a narrow range road, wide width road in the downtown area and wide width road on the outskirts of the city. The preference degree for each selected bus-stop environment was compared. The comparison conditions were a median bus stop with preexisting landscape, a median bus stop with planted trees, and a landscape without a median bus stop. The results of the study can be Summarized as follows: First, the visual influence on median bus stops depends on the visual complexity of the environment where they are located. People had an affinity for the median bus stop in which the visual complexity was low, while the preference degree of median bus stop was low in a highly complex area. Secondly, regardless of regional environment where median bus stops are located, research showed that it is more "impressive" to have a median bus-stop with planted trees than landscape without a median bus stop. Thirdly, the median bus stop with plants highly preferred over one without moreover, the landscape with planted trees would provide a comfortable mind for people. This study reveals that planting-oriented design concepts in median bus stops exhibit significant differences in the preference assessment factors. Thus, for further median bus stop construction, planting is desirable to create an impressive streetscape and better scenic quality.