• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.218-223
• /
• 2010

본 논문에서는 UWB(Ultra Wide Band) 통신 시스템에서 사용할 수 있는 CPW(Coplanar Waveguide) 급전 방식을 이용한 새로운 UWB 안테나를 설계 제작하여 측정하였다. CPW-fed 평면 슬롯 안테나는 광대역, 저비용과 무선 주파수 프론트 엔드 회로와 함께 간단히 집적화 시킬 수 있는 이점들을 가지고 있다. 제안된 안테나의 전산 모의실험에는 Ansoft사의 FEM(Finite Element Method) 방식의 HFSS(High Frequency Structure Simulator)를 사용하였다. 두께 1.6 mm, 유전율 4.4의 FR-4 기판을 사용하여 제작하였다. 제안된 안테나는 UWB 통신 시스템에서 사용되는 3.1~10.6 GHz에서 VSWR(Voltage Standarding Wave Ratio)${\leq}2$임을 만족하였다. 측정된 최대 이득은 3 GHz에서 2.61 dBi, 6 GHz에서 4.95 dBi, 8 GHz에서 2.89 dBi, 11 GHz에서 7.35 dBi이다.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1837-1844
• /
• 2016

본 논문에서는 UWB (Ultra Wide Band) 주파수 대역 (3.1 ~ 10.6 GHz)에서 동작하는 안테나를 제안한다. 제안된 안테나는 UWB 대역 특성을 얻기 위하여 기존 포크형 구조에 원형 패치를 결합하고, 접지면을 원호 구조로 구현하였다. 구현된 안테나는 유전율 4.4인 FR-4 기판 위에 설계되었고 전체 크기는 $34mm(W){\times}50mm(L){\times}1mm(t)$ 이다. 최적화된 수치를 사용하여 제안된 안테나를 제작하였으며 특성을 실험한 결과 UWB 대역에서 약 -10 dB 이하의 반사 손실, 전류분포, 이득, 방사패턴의 특성을 측정하였다. 이와 같은 실험결과로 광대역 통신시스템에 활용이 가능할 것으로 판단된다.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2518-2525
• /
• 2015

본 논문에서는 U자형 슬롯을 사용하여 802.11a(5.15 ~ 5.825 GHz) 대역을 제거한 CPW(Coplanar Waveguide) 구조를 갖는 UWB(Ultra Wide Band) 안테나를 제안한다. 제안된 안테나는 UWB 통신에 적합한 초광대역 특성(3.1~10.6 GHz)을 만족하면서, 5 GHz WLAN 대역(5.15 ~ 5.825 GHz)에서 주파수 대역 저지 특성을 갖는다. 안테나는 유전율 4.4인 FR-4 기판 위에 설계되었고 전체 크기는 $30mm(W){\times}20mm(L){\times}1mm(t)$ 이다. 제작된 안테나는 저지 대역인 5.15 ~ 5.825 GHz를 제외하고, 3.1 ~ 10.6 GHz 대역에서 $VSWR{\leq}2$를 만족한다. 그리고 동작대역에서 측정된 이득과 방사패턴의 특성을 나타내었다.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.46-51
• /
• 2018

In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of $15mm{\times}50mm{\times}1mm$. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권7호
• /
• pp.857-862
• /
• 2007

A novel compact ultra wideband(UWB) antenna for UWB application is proposed in this paper. The proposed antenna with $22mm{\times}26mm{\times}1.6mm$ covers the entire UWB bandwidth and has band notch characteristic for the frequency band of $5.15{\sim}5.825GHz$ limited by WLAN. The antenna has a concaved ground plane and staircase shape patch to achieve the wide bandwidth, and has an U shape slot with $\lambda/4$ length to notch the band. The return loss and group delay of the proposed antenna are measured.

• 한국ITS학회 논문지
• /
• 제6권2호
• /
• pp.119-125
• /
• 2007

본 논문에서는 실제 이동통신 단말기에 적용 가능한 다중대역 폴디드 모노폴 내장형 안테나를 제안하였다. 기존에 제안되었던 폴디드 모노폴 안테나와 달리 다중 공진 특성을 나타내고, 고주파수 대 역에서는 일반적인 모노폴 안테나와 같이 광대역 특성을 가진다. 제작된 안테나의 측정된 대역폭은 정재파비 3 이하 기준으로 저주파수 대역과 고주파수 대역에서 각각 180 MHz와 1,880 MHz를 가지며, 현재 상용화되는 모든 서비스 대역(CDMA, GSM, GPS, DCS, PCS, W-CDMA, WiBro, S-DMB)에서 효과적으로 동작하는 것을 확인하였다.

• 전기전자학회논문지
• /
• 제27권1호
• /
• pp.109-115
• /
• 2023

In this paper, we design and implement an Ultra-Wide Band (UWB, 3.1~10.6 GHz) antenna with 5G mobile communication (3.42~3.70 GHz) and Wireless Local Area Network (WLAN, 5.15~5.825 GHz) bands rejection characteristics. The proposed antenna consists of a planar radiation patch with two slots. The upper slot contributes to reject 5G mobile communication band and the lower slot contributes to reject WLAN band. The Voltage Standing Wave Ratio (VSWR) values of the proposed antenna show good performances in whole UWB band except for rejection bands based on VSWR 2.0. The proposed UWB antenna was simulated using High Frequency Struture Simulator (HFSS) by Ansoft. The simulated antenna showed dual rejection bands of 3.31~3.92 GHz and 5.04~5.90 GHz in UWB band, and measured antenna showed dual rejection bands of 3.35~3.97 GHz and 5.06~5.97 GHz. The largest VSWR values measured at each rejection band are 13.60 at 3.64 GHz and 10.25 at 5.52 GHz. The measured maximum gain is 5.31 dBi at 10.00 GHz. The lowest gains for the measured antenna at rejection bands are -8.73 dBi at 3.70 GHz and -4.36 dBi at 5.56 GHz.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.24-28
• /
• 2010

This paper is presented on the antenna design for notepc platform. We present the antenna with combination of electric-magnetic radiator for dual-band Wireless Local Area Network (WLAN) service and a High Speed Downlink Packet Access (HSDPA) service. Due to the limited antenna space in notepc platform, the antennas for various wireless communication service should be located at a very small area. In this paper, the magnetic-type radiator works for high frequency band (1.7 - 2.1 GHz) application and the electric-type radiator works for low frequency band (820 - 960 MHz) application. This combination produces wide-band characteristics in the high frequency band. Simulation and experimental results of input impedance and gain characteristics of the proposed antenna are presented. There are good agreements between the simulated and measured S11 and gain values.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.20-30
• /
• 2019

A wide-band multiple-input multiple-output (MIMO) antenna with dual-band (2.4 and 5 GHz) operation is proposed for premium indoor access points (IAPs). Typically, an omni-directional pattern is used for dipole antennas and a directional radiation pattern is used for patch antennas. In this paper, both antenna types were used to compare their performance with that of the proposed $2{\times}2$ MIMO antenna. We simulated and measured the performance of the MIMO antenna, including the isolation, envelope correlation coefficient (ECC), mean effective gain (MEG) for the IAPs, and the throughput, in order to determine its communication quality. The performance of the antennas was analyzed according to the ECC and MEG. The proposed antenna has sufficient performance and excellent characteristics, making it suitable for IAPs. We analyzed the communication performance of wireless networks using the throughput data of a typical office environment. The network throughput of an 802.11n device was used for the comparison and was conducted according to the antenna type. The results showed that the values of the ECC, MEG, and the throughput have unique characteristics in terms of their directivity, antenna gains, isolation, etc. This paper also discusses the communication performance of various aspects of MIMO in multipath situations.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.30-34
• /
• 2008

In this paper, we analyze the performance of pulse position modulation-time hopping ultra wide band (PPM-TH UWB) systems with antenna diversity technique in indoor wireless channel. A modified Saleh and Valenzuela (SV) model is adopted as a UWB indoor channel model. Perfect synchronization between a transmitter and a receiver is assumed. Therefore, coherent equal gain combining (EGC) scheme to collect the energy available in the multipath components is investigated. It is shown that the performance is improved by increasing the number of antennas at the receiver. The results of this paper can be applied to the applications of UWB.