• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.20-26
• /
• 1998

100％ viscose rayon fabric was treated with 1,2,3,4-butanetetracarboxylic acid (BTCA) by pad-dry-cure process in the presence of various catalysts. The dimensional stability, mechanical properties and hand values of fabric treated with BTCA were investigated. The ester-crosslinking reaction was influenced by the concentration of BTCA and type of catalyst. The fabric treated with BTCA was comparable or superior to that treated with conventional crosslinking agents such as dimethyloldihydroxyethyleneurea and 4,5-dihydroxy-1,3-dimethyl-2-imidazolidinone in respect of wrinkle recovery, shrinkproof property, retention of strength, and hand values. But in yellowing of fabric, the fabric treated with BTCA was inferior to that treated with conventional crosslinking agents. The fabric treated with BTCA/sodium formate was inferior to that treated with BTCA/sodium hypophosphite in respect of WRA, but had better strength retention and whiteness.

• 한국염색가공학회지
• /
• 제17권1호
• /
• pp.52-59
• /
• 2005

The purpose of this study is to establish the scientific data of cotton fabric pretreated with skim milk powder and to improve the dyeability. The surface monophology, add on, whiteness, stiffness, air permeability, moisture regain and absorption of cotton fabrics were evaluated by varying concentration of SMP to get the optimal conditions in pretreatment. FT-IR of cotton fabrics pretreated with SMP were measured. Amino acid compositions, viscosity of SMP were evaluated. The K/S values by varying concentration of cinnamon cassia and subtract of dyed SMP-C were measured. I attempted to evalute the color fastness of untreated and AI. The results are as follow; The optimal concentration of SMP was 9%(w/v) to be pretreated with cotton fabrics. From FT-IR spectrum, formation of -NH$_2$ and -COOH was verified by SMP-C. Denaturalization of protein and condensation of carbohydrate, fat, etc. were found in a measurement of amino acid and viscocity. The K/S value of cotton fabrics pretreated with SMP was higher than that of untreated. Most of the color fastnesses were great.

• 한국가구학회지
• /
• 제21권5호
• /
• pp.413-423
• /
• 2010

The study has been carried to evaluate the wood color, a typical element of visual and decorative effect, for seven major domestic softwoods using L*a*b* and chrominance ($\Delta$E*ab). The result showed that the values of whiteness, redness, and yellowness were positive at both sapwood and heartwood and there were no wood having a small chrominance difference ranged 0~0.5. There was also no wood having a chrominance difference ranging 0.5~3.0. Ginkgo biloba, Pinus koraiensis, and Larix kaempferi wood showed a little different chrominance, Taxus cuspidata, Pinus densiflora for. erecta, and Pinus densiflora wood substantial different chrominance, Juniperus chinensis wood largest different chrominance. It is concluded that the study results could be utilized as a data base in areas of wood craft and furniture and could open a way to substitute foreign imported woods.

• 한국가금학회지
• /
• 제26권2호
• /
• pp.97-108
• /
• 1999

The consumer demands for quality of meats has become diverse in recent years. The present paper describes mainly the technology to improve the broiler meat quality with special reference to reducing fat contents in edible meats which is the heart of the quality constraints. Abdominal fat deposition in broilers was reduced by feeding of medium-chain triglycerides(MCT), suggesting MCT feeding is useful to produce broiler meat with low fat content. A phase feeding system to aim at improving meat quality that is mainly comprised with partial replacement of dietary protein into phase during 4∼6 weeks increased edible meat yields and reduced abdominal fat deposition and fat contents in breast and thigh meats. Whiteness of fat tissue was intensified by feeding beef tallow or lard in place of yellow grease. Feeding Phaffia yeast containing astaxanthin increased redness of breast and thigh meats and improved visual appearance of meats which may be preferential for consumers. Feeding fish oil reduced abdominal fat deposition and increased EPA and DHA contents of fat tissues. These procedures could be used for manipulation of meat quality to meet consumer demands.

• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.31-35
• /
• 2000

When insoluble sericin was hydrolyzed by treatment of NaOH solution, the solubility was increased with higher treatment temperature and longer treatment time. Whereas it was decreased in addition of NaHSO$_3$. As the results of electrophoresis in sericin powder obtained by the NaOH treatment, a distinguishable band was not confirmed. Average degree of polymerizations(A.D.P.) of sericin hydrolyzed by NaOH solutions were about 19.6∼22.1 and average molecular weight(M.W.) were about 2,200∼2,500. The longer hydrolysis time increased the whiteness of sericin powder. As the results of amino acid analysis, the contents of Thr., Tyr., and Ser. were decreased in NaOH hydrolysis as compared to HCl hydrolysis. In DSC analysis, thermal deformation and pyrolysis peak located at near 230$\^{C}$ and 320$\^{C}$, respectively.

• 한국작물학회지
• /
• 제33권3호
• /
• pp.292-297
• /
• 1988

기계이앙묘의 도장을 방지하고 묘소질의 향상을 꾀하며 이앙후 초기생육을 촉진시킬 수 있는 가능성을 검토하기 위하여 triazole 계의 GA생합성 억제제인 Uniconazole과 Pochlobutrazol 의 처리시험을 수행하였다. 각기 다른 처리시기 및 약량하에서 묘소질에 미치는 영향을 구명하고져 온실에서 검토한 결과를 요약하면 다음과 같다. 1. 초장단축효과로 본 약제간 활성은 Uniconazole이 높았으며, 초장단축요인은 주로 엽초의 신장억제에 기인되었다. 2. 파종전 토양혼화처리에서 파종후 30일까지 초장단축율이 경시적으로 증가하였으나 30일 후로는 감소하였으며 두 약제가 비슷한 양상을 나타내었다. 3. 처리시기별 초장단축효과는 처리시기가 빠를수록, 동일 처리시기에서는 약량이 증가할수록 높았다. 4. 건물중비율은 약제처리에 의해 낮아졌으며, 초장단축율과 묘충실도는 정의 상관관계가 있었다.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.241-249
• /
• 1982

Two dinnerware porcelain bodies involving partial replacement of feldspar and kaoline by about 35wt% domestic GYUNGJU-pottery stone were developed and their properties such as shrinkage, porosity, firing range, linear thermal expansion, pyroplastic deformation, degree of whiteness and mechanical strength were compared with those of a traditional clay-flint-feldspar body. The experimental results showed that one of the clay-flint-feldspar-pottery stone body with 1% ZnO addition had the firing range of 115$0^{\circ}C$~121$0^{\circ}C$, whereas the traditional body had the firing range of 12$25^{\circ}C$~129$0^{\circ}C$. The linear drying shrinkage and linear dry-to-fired shrinkage of all bodies were 2.5~4.5% and 15~18%, respectively. And the major crystalline phases of sintered bodies were $\alpha$-quartz and secondary mullite surrounded by glassy phases. The modulus of rutpture of sintered bodies was ranged from 860 to 870kg/$\textrm{cm}^2$, and the microhardness of sintered bodies was 680 kg/$\textrm{cm}^2$.

• Fibers and Polymers
• /
• 제2권4호
• /
• pp.190-195
• /
• 2001

Additives, such as sodium perborate and borax, were examined in dialdehyde wrinkle resistant finishing of cotton. Results indicated that the whiteness index(WI) of cotton treated with dialdehyde and additive showed about 90% of WI of the untreated cotton but with decrease in wrinkle recovery angle (WRA) due to inhibition effect of these additives. Effect of additive on the WRA reduction was more prominent with glutaraldehyde than with glyoxal. Reduction in WRA of cotton treated with both dialdehydes and boron compound was minimized by simultaneous addition of formic acid in the bath. Addition of formic acid was also generally beneficial in maintaining WI retentions after 8 months storage. Furthermore, boron compounds were also effective in improving retentions of mechanical properties. By FTIR analysis the residual aldehyde group was detected on the dialdehyde-finished cotton, whereas no peak was shown by addition of boron compounds. This suggested that the residual aldehyde group was a main cause of fabric yellowing on the dialdehyde-finished cotton. Dialhehyde with boron compound, therefore, can be used to replace a conventional formaldehyde-containing wrinkle resistant finishing of cotton.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1060-1068
• /
• 1998

The effects of various catalysts and softners on the anti-crease finish of ramie with glyoxal were investigated. A number of metal salts commonly used as Lewis acid catalysts in DP finishing of cotton with formaldehyde and N-methylol agents were screened for glyoxal treatment of ramie fabric. Various organic and inorganic acids were mixed with Lewis acid catalyst as co-catalysts to improve catalytic activity. As a result, the combination of aluminum sulfate and citric acid was proven highly effective in catalyzing the crosslinking of ramie cellulose by glyoxal under lower curing temperature. With a mixed catalyst, performance properties, such as whiteness and tearing strength as well as wrinkle recovery of treated ramie fabric were improved as compared with that treated with aluminum sulfate alone. Additional improvement of tearing strength and wrinkle recovery was achieved by applying silicons softner in the treatment bath.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.197-198
• /
• 2009