• Transactions of Materials Processing
• /
• v.21 no.5
• /
• pp.330-335
• /
• 2012

Roll formed steel bolts are electrodeposited with Zn-Ni to protect themselves from corrosion. However, white storage stain or white rust(corrosion) is found on Zn-Ni electrodeposited surface of steel bolts when they are exposed to moisture. In this paper a new process is introduced to protect Zn-Ni electrodeposited steel bolt from white storage stain or white rust for a long time under the salt spray test and high humidity test conditions. The better corrosion resistance could be gotten by the additional process of Ni-P electroless deposition and heat treatment to conventional manufacturing method of Zn-Ni coated steel bolt. The corrosion resistance of Zn-Al powder slurry coated steel bolt showed better than that of Zn-Ni electrodeposited one.

• Transactions of Materials Processing
• /
• v.28 no.2
• /
• pp.71-76
• /
• 2019

Corrosion resistance is one of the essential properties required in steel bolts. The various types of coatings are used to improve the corrosion resistance of steel bolts. But, roll formed, subsequently Zn alloy electrodeposited and top coated steel bolt easily takes place the white storage stain or white rust under high humidity condition. To investigate the corrosion resistance of roll formed and subsequently the various types of coated steel bolts, their polarization curves were measured by potentio-dynamic tester in this study. Based on the measured polarization curves, the more times of chromate and top coating on roll formed steel bolt, the higher corrosion resistance was shown. The roll formed steel bolt, which was Zn-Ni electro-deposited, two times chromated, one time inorganic top coated, one time organic top coated and annealed, showed the best corrosion resistance.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.112.2-112
• /
• 2003

Levels of blister rust infection (from Cronartium ribicola) varied in western white pine(Pinus monticola Dougl.) seedlings grown in two nurseries in northern Idaho. This observation suggested the potential importance of environmental components operating on the blister rust pathosystem. In an experiment designed to test the influence of environmental conditions at two nurseries, seedlings of a single genetic source were unintentionally held in cold storage for 6 months longer at one nursery than at the other. Subsequently, these seedlings, which had been growing under nursery conditions for 7 months or 1 month, were inoculated with blister rust spores on September 9th, 1999. Infection efficiency measured on the seedlings with only 1 month of growth was 70X greater than on the seedlings that had 7 months for their new growth to mature. Results from this nursery test and infection levels of northern Idaho resistant selections in mild climates suggest that expression of genes related to rust resistance in western white pine can be manipulated by regulation of phonology. If so, several new molecular tools may be employed to enhance our understanding of environmental regulation of genes for blister rust resistance.

• Korean Journal of Breeding Science
• /
• v.41 no.2
• /
• pp.141-144
• /
• 2009

A new spray chrysanthemum 'Pink Berry' was released by National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA), Korea in 2007. A cross was made in 2004 between 'Lineker Salmon', a spray cultivar with salmon petals, and 'Baeksokuk', a spray cultivar with white petals. Trials were conducted from 2005 to 2007 for evaluation and selection of this cultivar, including shade cultivation in summer and retarding cultivation in autumn. The natural flowering time of 'Pink Berry' is late October, but year-round flowering is possible by photo-periodic control. The cultivar has single type flowers with pink petals and a green flower center. It shows long vase life of 22 days and resistance to white rust. The diameter of flower is 52.0 mm. The numbers of flowers per stem and petals per flower are 15.5 and 29.5, respectively. Days to flowering under the short day treatment is about 56 in autumn seasons.

• Korean Journal of Breeding Science
• /
• v.41 no.2
• /
• pp.173-176
• /
• 2009

A new spray chrysanthemum cultivar 'Pure Angel' was released by National Institute of Horticultural and Herbal Science (NIHHS), Rural Development Administration (RDA), Korea in 2007. The cross was made in 2004 between 'Innocence', a breeding cultivar of NIHHS, and 'Baeksokuk', a spray cultivar with white petals. Trials were conducted from 2005 to 2007 for the evaluation and selection of this cultivar, including shade cultures in summer and retarding cultures in autumn. The natural flowering time of 'Pure Angel' is late October, but year-round flowering is possible by photo-periodic control. The cultivar has single type flowers with pure white petals and a green flower center. It shows long vase life and resistance to white rust. The diameter of flower is 52.5 mm. The numbers of flowers per stem and petals per flower are 12 and 22.5, respectively. Days to flowering under the short day treatment is about 52 days in spring seasons.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2000.10a
• /
• pp.38.1-38
• /
• 2000

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.606-610
• /
• 2010

A new cultivars Dendranthema grandiflourm 'Dream Moon' was developed at Gyeonggi-do Agricultural Research and Extension Services (GARES), Korea in 2008. The cultivar 'Dream Moon' was derived from a cross between 'Patra', a spray cultivar with yellow single type, and 'Sei-rosa', a spray cultivar with pink single type in 2005. The cultivar has single type flowers with pink petals. Trial evaluation was conducted from 2006 to 2008 for a shading cultivation in summer and a retarding cultivation in spring. The flowering time of 'Dream Moon' is late October, and year-round flowering is possible by shade or light treatment. The diameter of flower is 56.0 mm. Numbers of flowers per stem and petals per flower are 16.4 and 24.6, respectively. After investing of specific characters from 2006 to 2008, it was finally selected and named 'Dream Moon'. It has resistance to white rust and the vase life is about 20.7days in autumn season.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.1
• /
• pp.32-38
• /
• 2011

Galvanized steel has gone through a chemical process to keep it from corroding. The steel gets coated in layers of zinc because rust will not attack this protective metal. For countless outdoor, marine, or industrial applications, galvanized steel is an essential fabrication component. The reduction of the corrosion rate of zinc is an important topic. In the past, a very popular way to reduce the corrosion rate of zinc was to use chemical conversion layers based on $Cr^{+6}$. However, a significant problem that has arisen is that the use of chromium salts is now restricted because of environmental protection legislation. Therefore, it is very important to develop new zinc surface treatments that are environmentally friendly to improve the corrosion resistance of zinc and adhesion with a final organic protective layer. In this study, a Urethane solution (only Urethane 20 wt.%; S-700) and an organic/inorganic solution with Si (Si polysilicate 10 wt.% + Urethane 10 wt.%; LRO-317) are used. Based on the salt spray test of 72 h, S-700 and LRO-317 had a superior effect for the corrosion resistance on EGI and HDGI, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.35-47
• /
• 2011

For the synthesis of water soluble acrylic modified epoxyester resin, fatty acid/epoxy ratio of 50/50 was used, and introduced maleic anhydride. Ratio of styrene/acrylic acid of acrylic monomers was fixed 85/15 and ratio of epoxyester/acrylic monomer was controlled 80/20, 75/25, 70/30, 65/35, and degree of neutralization were changed 65%, 80%, to 100%. As a result, 40% solids acrylic modified epoxyester resins were synthesized. Resins were evaluated water soluble stability, drying time, water resistant, storage stability and physical properties. And the white paints were prepared, and were evaluated viscosity, drying time, water resistance, adhesion, sagging, spray workability, gloss, salt spray resistance, skinning, whiteness and flash rust. As a result, the degree of neutralization of 100% and the ratio of epoxyester/acrylic monomer of 75/25 showed the best properties.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.60-66
• /
• 2010

Zinc has a number of characteristics that make it well suited for use as a coating to protecting iron and steel products from corrosion. Its excellent corrosion resistance in most environments accounts for its successful use as a protective coating on a variety of products and in many exposure conditions. The excellent field performance of zinc coatings results from their ability to form dense, adherent films that corrode at a rate that ranges from 1% to 10% of the corrosion rate of ferrous materials, depending on the environment. Recently, EU RoHS and EU ELV prohibited the use of materials that adversely affect the environment, such as Pb, Hg, Cd, and $Cr^{+6}$. In this study, environmentally-friendly, Cr-free solutions (epoxy solution, acrylic solution, and urethane solution S-700) and organic/inorganic solution with Si; LRO-317) were used to evaluate the corrosion resistance of zinc-coated steel subjected to a saltwater spray for 72 hours. The coating of urethane solution (S-700) was best among the three kinds of solution with heat treatment during five minutes at $190^{\circ}F$. Test specimens with S-700 and LRO-317 coating were heat treated in a drying oven at 170, 180, 190, 200, and $210^{\circ}C$ for five minutes. The results show that the optimum corrosion resistance was $190^{\circ}C$ in EGI and $170^{\circ}C$ in HDGI, respectively.