• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.330-335
• /
• 2002

In the direct sequence code division multiple access system, the problem of multiple access interference due to multiple access is generated. A interference cancelling receiver is used to solve this problem. The conventional interference cancelling receiver is structure of successive interference canceller using antenna array. In this structure, the difference of between method I and method II depends on updating weight vector. In this paper, the adaptive blind CMA array interference cancelling receiver using cost function of constant modulus algorithms is proposed to update weight vector at conventional structure. The simulation compared the proposed interference cancelling receiver with two conventional interference cancelling receivers by signal to interference ratio and bit error rate curve under additive white Gaussian noise environment. The simulation results show that the proposed receiver has about the gain of SIR of 1.5[dB] more than method I which is conventional receiver at SIR curve, and about the gain of SIR of 0.5(dB) more than method II. In BER curve, the proposed IC receiver about the gain of SNR of 2[dB] more than method I and about the gain of SNR of 0.5[dB] more than method If, Thus, the proposed interference cancelling receiver has the higher performance than conventional interference cancelling receivers.

• Journal of Photoscience
• /
• v.4 no.3
• /
• pp.147-160
• /
• 1997

INTRODUCTION : Various types of organic reactions in the crystalline state, so-called "topochemical reaction", have been reported in this century." Among the reactions, [2+2] photocycloaddition of diolefin crystals are one of the most intensively investigated examples. In the topochemical reaction in a pure sense, the space group symmetry is perfectly preserved throughout the reaction as were demonstrated by the crystalline-state photopolymerization of 2,5-distyrylpyrazine (2,5-DSP) and photodimerization of propyl $\alpha$-cyano-4-[2-(4-pyridyl) ethenyl]cinnamate. 2,5-DSP was initially prepared by Franke and in 1958 Koelsch and Gumprecht described briefly in their article of diazine-derivatives that it was found that the compound (2,5-DsP) was converted into a colorless insoluble polymer (\ulcorner) dec. 331~331$\circ$ when the solid was exposed for a few hours to ultraviolet light. Wright described in his book as if Koelsch and Gumprecht had investigated both the structure of the photoproduct and the crystal structure 2,5-DSP in detail. However, in the paper, they have not described any study on chemically correct analysis and crystallography of the resulting photoproduct at all. In 1967, one of present authors (M. H.) independently made the same observation as Franke that brilliant yellow crystal of 2,5-DSP was converted into powdery white substance under the sunlight in the course of a preparative study of pyrazine-2,5-dicarboxylic acid from 2,5-DSP. He investigated this phenomenon and concluded for the first time that a linear highmolecular-weight polymer crystal ([$\eta$] > 3.0 in $CF_3COOH$ solution) with recurring cyclobutane units in the main chain, had been produced from 2,5-DSP crystal by the action of sunlight.on of sunlight.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.91-98
• /
• 1997

Most dynamic systems have various random properties m excitation and system parameters. In this paper, a procedure for structural response and reliability analysis is proposed for the linear dynamic system with random properties in both excitation and system parameters. The system parameter and response with random properties are modeled by the perturbation technique, and then the response analysis is formulated by probabilistic and vibration theories. Probabilistic FEM is also used for the calculation of mean response which is difficult by the proposed response model. The first passage analysis by the integral equation method is used to analyze the probability of failure. The integral equation method results in the first passage probability in terms of crossing rates and first passage probability densities. In this study it is assumed that excitations, system parameters and responses are Gaussian. As an application example, the probabilities of failure at transient state are calculated for a sdof system with random mass and spring constant subjected to stationary white-noise excitation and the results are compared to those of numerical simulation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.97-99
• /
• 2003

Lineament density maps can be used for the quantitative evaluation of relationship between lineaments and groundwater occurrence. There are several kinds of lineament density maps including lineament length density, lineament cross-points density, and lineament counts density maps. This paper reports the usefulness of the representative elementary area (REA) concept for lineament analysis. This concept refers to the area size of the unit circle to calculate the lineament density factors distributed within the circle: length, counts and cross-points counts. The circle is a unit circle that calculates the sum of the lineament length, lineament counts and the number of cross-points within it. The REA is needed to obtain the best representative lineament density map prior to the analysis of relation between lineaments and groundwater well yield or other groundwater characteristics. A basic lineament map for the Yongsangang-Seomjingang watershed of Korea, drawn from aerial black-and-white photographs of 1/20, 000 scale was used for demonstrating the concept. From this study, the conclusions were as follows: (1) the REA concept can be efficiently applied to the lineament density analysis and mapping, (2) for whole Yongsangang-Seomjingang watershed which has 6, 502 lineaments with an average lineament length of 3.3 km, the lower limits of each REA used for drawing the three density maps were about 1.77 $\textrm{km}^2$ (r=750 m) for lineament length density, 7.07 $\textrm{km}^2$ (r=1, 500 m) for lineament counts density, and 4.91 $\textrm{km}^2$ (r=1, 250 m) for lineament cross-points density, respectively, (3) the lineament densities are inversely proportional to the size of REA, and the REA can be calculated with this inversely linear regression model, (4) if the average lineament density values for the whole study area are known, the most accurate density maps can be drawn using the REAs obtained from each linear regression model, and (5) but critical attention should be paid to draw lineament counts density and lineament cross-points density maps because.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.146-155
• /
• 2012

The filtered-x LMS(FX-LMS) algorithm has been applied to the active noise control(ANC) system in an acoustic duct. This algorithm is designed based on the FIR(finite impulse response) filter, but it has a slow convergence problem because of a large number of zero coefficients. In order to improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct since the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm(FU-LMS) based on infinite impulse response(IIR) is developed by considering the backward acoustic propagation. This algorithm, unfortunately, generally has a stability problem. The stability problem was improved by using an error smoothing filter. In this paper, the recursive LMS algorithm with variable step size and smoothing error filter is designed. This recursive LMS algorithm, called FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct such as the intake system of an automotive. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal of which the instantaneous frequency is variable. Test results demonstrate that the FU-VSSLMS algorithm has superior convergence performance to the FX-LMS algorithm and FX-LMS algorithm. It is successfully applied to the ANC system in a short duct.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.12
• /
• pp.1247-1256
• /
• 2012

The paper details the development of a Korean style loungewear based on traditional Korean hanbok clothing. For this, we surveyed and collected data from 3,500 adults over 20 years of age. The questions were on their preferences of hanbok for both traditional and contemporary styles as well as loungewear. The survey showed that preferences for hanbok were high for both traditional and contemporary styles. The survey also suggests how a successful mass-produced Korean style loungewear should be designed to increase its popularity. It should feature comfortably simplified silhouettes, a selection of contemporary colors from Korean symbolic colors, modernized Korean textile surface designs, and easy-to-maintain healthy fabric. Based on these results, the development direction of Korean style loungewear was set and various loungewear samples were produced. Another group of survey participants were asked to try on samples and their preferences were surveyed. At the conclusion, a version that was most preferred among the participants was obtained. We suggest one-piece style and two-piece style designs with silhouettes based on the characteristics of traditional Korean costumes. The preferred fabric for loungewear was natural and soft cotton. We suggest the necessity and effectiveness of loungewear made with environment-friendly hanji-fabric. The main colors for loungewear were selected based on survey: blue, red, white, and saekdong (color stripes). We made color combinations with the main colors then applied the textile surface designs. The traditional Korean patterns of Hangeul (Korean letters), taegeuk (yin-yang), geometric figures, and samjogo (three-legged crow) were also chosen, and then loungewear using the textile designs was developed. The results have been shown on the "Han Style Fashion Show" by Jeonju City and exhibited in the "Seoul Living Design Fair" and the "International Art & Craft Trend Fair" in COEX, Seoul.

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.11-18
• /
• 2016

Accessing unauthorized rogue APs in WiFi environments is a very dangerous behavior which may lead WiFi users to be exposed to the various cyber attacks such as sniffing, phishing, and pharming attacks. Therefore, prompt and precise detection of rogue APs and properly alarming to the corresponding users has become one of most essential requirements for the WiFi security. This paper proposes a new rogue AP detection method which is mainly using the installation information of authorized APs and the DHCP snooping information of the corresponding switches. The proposed method detects rogue APs promptly and precisely, and notify in realtime to the corresponding users. Since the proposed method is simple and does not require any special devices, it is very cost-effective comparing to the wireless intrusion prevention systems which are normally based on a number of detection sensors and servers. And it is highly precise and prompt in rogue AP detection and flexible in deployment comparing to the existing rogue AP detection methods based on the timing information, location information, and white list information.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.3
• /
• pp.55-62
• /
• 2013

This paper aims to detect Speed Bump by using Omni-directional Camera and to suggest Real-time update scheme of Speed Bump through Vision Based Approach. In order to detect Speed Bump from sequence of camera images, noise should be removed as well as spot estimated as shape and pattern for speed bump should be detected first. Now that speed bump has a regular form of white and yellow area, we extracted speed bump on the road by applying erosion and dilation morphological operations and by using the HSV color model. By collecting huge panoramic images from the camera, we are able to detect the target object and to calculate the distance through GPS log data. Last but not least, we evaluated accuracy of obtained result and detection algorithm by implementing SLAMS (Simultaneous Localization and Mapping system).

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.760-770
• /
• 2008

Though flash images are in general less noisy and present details better than no-flash images, they may sometimes be unnaturally saturated to white/gray-tone and have ridiculously strong shadows around the foreground objects due to the strong flashlight. In this paper, we propose a new algorithm to improve the color quality of the flash images by transfer of the color information of the same-scene no-flash images. The proposed algorithm preserves the vivid edges and the clean details of the flash image while transferring natural colors of the no-flash image, so that it makes the constructed images of the better subjective quality. The performance of the proposed algorithm is verified by experiment which applied to the two types of images with different noise levels.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.927-934
• /
• 2013

This paper aims to realize a Signal to Noise Ratio Estimator which constitutes a critical index of the broadcasting system in OFDM system with a synchronized type based on ISDB-T system. Of the elements which are comprising OFDM segments of ISDB-T system using the MSE algorithm suitable for ASIC design owing to its low complexity among a diverse SNR estimation methods, SNR estimation method using the broadcasting information data and the SNR estimation method using scattered pilot signal were realized by RTL. These two methods were compared in terms of their performance through simulation test not only in the AWGN channel which is an ideal channel, but also in SFN channel and frequency selective fading channel, which are distorted channels. Complexity of two methods were also compared through RTL realization. As a result of this comparison analysis, it was concluded that the SNR estimation method using scattered pilot signal shows more excellent performance and easiness in realization.