• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.503-507
• /
• 2000

The corrosion protection methods of reinforcing steel in concrete are the various methods such as increasing thickness of cover concrete, using of reinforcing bars coated with epoxy, dosage of corrosion inhibitor as concrete admixture, cathodic protection method and etc. In this study, the performance of corrosion protection was investigated for the test specimens using corrosion inhibitors and cathodic protection, respectively. For this purpose, the accelerated corrosion tests for reinforcing steel were conducted according to the periodic cycles(140 days) of wetting($65^{\circ}C$, 90% R.H) and drying period($15^{\circ}C$, 65% R.H) for the test specimens. As a result, it can be concluded from the test that the effect of corrosion inhibitor was found to be variable with products, the cathodic protection method was found to be independent of salt concentration in concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.315-322
• /
• 1997

This paper describes an experimental study on the seawater resistance of steel fiber reinforced concrete. The test method adopted for this study may be devided into long-term immersion test and accelerated test by wetting and drying. Test were carried out to evaluate the procedure in which reduction in dynamic modulus, length change and compressive strength to nine months were measured. Resistance indicators are the water - cement ratio, the content of steel fiber, the immersion water(artificial seawater or freshwater). The conditions of intervals of immersing in artificial seawater and drying, low water-cement ratio, and non-steel fiber became most deteriorated.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.85-91
• /
• 2003

In this study, We have investigated leaching characteristics of heavy metals for recycled plastic composites containing EAF(Electric Arc Furnace) dust & EAF slag. EAF dust & EAF slag used that is generated in the 3 steel-making compaines in domestic. The physical and chemical properties of EAF dust & slag was examined by measuring specific surface area. porosity, oil absorption test and chemical wetting analysis etc. Results of total analysis indicated that EAF dust, slag contained significant amount of hazardous metals such as Cu, Pb, Cd and Cr. But, In the leaching test of the recycled plastic composites containing EAF dust, slag by Korean Standard Leaching Procedure, composites shows much lower leaching concentration of heavy metals. It was concluded that the recycled plastic composites containing EAF dust, slag showed good physical and chemical characteristics. This means that the EAF dust, slag can be effectively used as a functional filler.

• 한국분말재료학회지
• /
• 제19권6호
• /
• pp.416-423
• /
• 2012

This paper introduces an effect of a preparing $ZrO_2$-Ag composite on its mechanical properties and microstructure. In present study, $ZrO_2$-Ag was prepared by reduction-deposition route and wetting dispersive milling method, respectively. Two type of Ag powders (nano Ag and micron Ag size, respectively) were dispersed into $ZrO_2$ powder during wetting dispersive milling in D.I. water. Each sample was sintered at $1450^{\circ}C$ for 2hr in atmosphere, and then several mechanical tests and analysis of microstructure were carried out by bending test, hardness, fracture toughness and fracture surface microstructure. As for microstructure, the Ag coated $ZrO_2$ showed homogeneously dispersed Ag in $ZrO_2$ in where pore defect did not appear. However, $ZrO_2$-nano Ag and $ZrO_2$-micro Ag composite appeared Ag aggregation and its pore defect, which carried out low mechanical property and wide error function value.

• Corrosion Science and Technology
• /
• 제7권5호
• /
• pp.243-251
• /
• 2008

Magnesium alloys become popular research topic in last decade due to its light weight and relatively high strength-to-weight ratio in the energy aspiration age. Almost all structure materials are supposed to suspend stress. Magnesium is quite sensitive to corrosive environment, and also sensitive to environmental assisted cracking. However, so far we have the limited knowledge about the environmental sensitive cracking of magnesium alloys. The corrosion fatigue (CF) test was conducted. Many factors' effects, like grain size, texture, heat treatment, loading frequency, stress ratio, strain rate, chemical composition of environment, pH value, relative humidity were investigated. The results showed that all these factors had obvious influence on the crack initiation and propagation. Especially the dependence of CF life on pH value and frequency is quite different to the other traditional structural metallic materials. In order to interpret the results, the electrochemistry tests by polarization dynamic curve and electrochemical impedance spectroscopy were conducted with and without stress. The corrosion of magnesium alloys was also studied by in-situ observation in environmental scanning electron microscopy (ESEM). The corrosion rate changed with the wetting time during the initial corrosion process. The pre-charging of hydrogen caused crack initiated at $\beta$ phase, and with the increase of wetting time the crack propagated, implying that hydrogen produced by corrosion reaction participated in the process.

• 지질공학
• /
• 제22권2호
• /
• pp.145-155
• /
• 2012

자동 흙-함수특성곡선 시험장치를 이용하여 상대밀도 60%인 주문진표준사에 대한 건조 및 습윤과정에서의 모관흡수력과 체적함수비를 측정하였다. 습윤과정이 건조과정에 비해 상대적으로 많은 시간이 소요되며, 이것은 건조과정에서 간극에 갇힌 독립된 공기에 의한 흐름 저항에 의한 것으로 판단된다. 측정된 모관흡수력과 체적함수비를 토대로 van Genuchten (1980)의 방법을 이용하여 흙-함수특성곡선(SWCC)을 예측하였다. 불포화 관련계수는 건조과정의 경우 ${\alpha}$는 0.399, n은 8.586, m은 0.884이며, 습윤과정의 경우 ${\alpha}$는 0.548, n은 5.625, m은 0.822로 산정되었다. 그리고 건조과정과 포화과정에서의 흙-함수특성곡선(SSCC)이 일치하지 않는 이력현상이 발생되었다. 불포화 관련계수를 이용하여 유효포화도와 흡입응력의 상관관계인 흡입응력특성곡선(SSCC)을 예측하였다. 흡입응력은 모관흡수력이 공기함입치 이상으로 작용할 경우 급격하게 감소하는 것으로 나타났다. 따라서 불포화토의 유효응력은 공기함입치 이상의 모관흡수력이 작용할 경우 포화토의 유효응력과 다른 값을 갖게 된다. 그리고 불포화상태에서의 동일한 유효포화도에서는 건조과정의 흡입응력이 더 크게 발생된다. 즉 흡입응력특성곡선(SSCC)에서도 건조과정과 포화과정이 일치하지 않는 이력현상이 발생되었다. 이는 흙-함수특성곡선(SWCC)의 이력현상에 기인하는 것으로 판단되며, 잉크병 효과와 접촉각 이력현상에 의해 발생되는 것으로 예상할 수 있다. 따라서 모래로 구성된 사면의 경우 지반 내 물이 유입되면서 흡입응력의 영향으로 사면 안정성에 유리하게 작용하다가 일정 흡입응력 이상이 되면 사면안정성에 불리하게 작용됨을 알 수 있다. 또한 실제 지반내 강우가 침투하는 과정은 습윤과정과 동일하므로 건조과정의 결과보다는 습윤과정의 결과를 활용하는 것이 바람직하다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.142-147
• /
• 2000

Durability characteristics of controlled low strength material(flowable fill) with high volume fly ash content was examined. The mix proportions used for flowable fill are selected to obtain low-strength material in the 10 to 15kgf/㎥ range. The optimized flowable fill was consisted of 60kgf/㎥ cement content, 280kgf/㎥ fly ash content, 1400kgf/㎥sand content, and 320kgf/㎥water content. Subsequently, durability tests including permeability warm water immersion, repeated wetting & drying, freezing & thawing for high volume fly ash-flowable fill are conducted The test results indicated that flowable fill has has acceptable durability characteristics.

• 한국표면공학회지
• /
• 제27권1호
• /
• pp.19-28
• /
• 1994

A study on adhesion property of evaporated Al-Cr films was conducted on steel sheet by using two-source evaporator. Adhesion of Al-Cr coated steel was evaluated by tape test after $180^{\circ}$bending. Adhesion was decreased with increasing the Cr content in Al-Cr films. It was thought that the decrease in adhesion with increasing Cr content be related to insufficient wetting and diffusion of Cr atoms in the film. Best adhesion was achieved in the case of pure aluminum film..

• 지질공학
• /
• 제18권4호
• /
• pp.567-576
• /
• 2008

강우에 의한 풍화토층의 침투 특성은 함수비 변화에 따른 침윤선 거동으로부터 파악이 가능하다. 토층내 침투수에 의한 침윤선 형성은 흙매질의 밀도와 입도분포 특성 및 투수계수와도 밀접한 관계를 갖고 있으며, 침윤선의 침투속도는 토층의 투수계수와 거의 동일한 개념으로 볼 수 있다. 이 연구에서는 편마암 분포지역의 산사태 현장모니터링 시스템을 이용하여 표토층을 기준으로 50 cm 및 80 cm 깊이에 대한 토층내 체적함수비 변화로부터 각각의 침투속도를 현장 스케일에서 산정하였으며, 이 지역 토층의 불교란 시료를 채취한 후 실내시험을 통해 구한 투수계수와 비교하였다. 불교란 시료의 투수계수는 $3.15{\times}10^{-3}cm/sec$이며, 체적함수비 변화로 계산된 침투속도는 평균 $1.87{\times}10^{-3}cm/sec$로써 두 배 가량 낮게 나타났다. 그 이유는 현장에서의 침투속도는 매질의 공극과 입도분포에 민감하게 영향을 받기 때문에 실내실험을 통해 산정된 값보다는 다소 낮은 값을 갖기 때문으로 판단된다. 표토층의 체적함수비 및 침투속도에 영향을 미치는 강우강도는 산악 지형을 고려해 볼 때, 일평균 20 mm 이상의 강우가 발생하였을 경우에 토층의 침윤선 범위를 확대시키는 것으로 나타났다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.104-108
• /
• 2002

This paper was investigated the lead free solder characteristics by P mass percentage chang e. Tension test, wetting balance test, spread test, and analysis of intermetallic compound after isothermal aging of Sn-2.5Ag-0.7Cu-0.005P, Sn-2.5Ag-0.7Cu-0.01P, Sn-2.5Ag-0.7Cu-0.02P, Sn-0.7Cu-0.005P were performed for estimation. By adding P on the solder alloys, it was showe d improvement of tensile strength, reduction of intermetallic compound growth and reduction of oxidization of fusible solder under wave soldering processes. After comparing solder alloy containing P with tin lead eutectic solder alloy, p containing solder alloys showed much better solderability than eutectic solder alloys.