• 한국식품영양과학회지
• /
• 제19권2호
• /
• pp.121-126
• /
• 1990

Internal mass transfer during osmotic concentration of apples in sugar solutions was exami-ned as a function of concentration temperature and immersion time of those solutions using moisture loss sugar gain molality and rate parameter. Influence of osmotic concentration processes on browning reaction was also evaluated compared to control In creasin the concen-tration and temperature of sugar solutions increased moistrue loss sugar gain molality and rate parameter. Water loss was rapid early in the process and then levelled off, The same phenomena were occurred on sugar gain only in higher concentration(60$^{\circ}$ brix). IN lower concentration (30$^{\circ}$brix) sugar gain was gradually increased during whole process. Moisture loss during osmotic concentration using a sugar solution(60$^{\circ}$ brix 6$0^{\circ}C$) with 180min immer-sion time was 45.79% Effect of osmotic concentration befor air dried to 4% M.C(wet basis) on browning reaction was significant. Minimum browning reaction during air drying was carried out using a pretreatment such as osmotic concentration in sugar solution(60$^{\circ}$brix 45$^{\circ}C$) with 150min immersion time(O.D=0.01) compared to control(O.D=0.17)

• 콘크리트학회논문집
• /
• 제14권2호
• /
• pp.148-155
• /
• 2002

본 연구는 폐지섬유보강 시멘트복합체의 수분 민감성 및 열화특성에 대하여 연구하였다. 폐지섬유는 건조공정에 의해 생산되었으며 슬러리-탈수 공법을 사용하여 폐지섬유보강 시멘트복합체를 제조하였다. 폐지섬유보강 시멘트복합체의 수분 민감성 덴 열화특성을 알아보기 위하여 수분민감성, 건조-습윤반복, 동결융해, 장기 오븐 건조의 영향을 실험실에서 촉진시험을 통하여 실시하였다. 폐지섬유보강 시멘트복합체에 대한 수분영향 및 열화에 대한 시험결과는 순수목질섬유보강 시멘트복합체와 통계적으로 비교 분석하였다 시험결과 폐지섬유보강 시멘트복합체는 수분노출 덴 장기 열화상태에서도 적절한 성능을 갖는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1147-1161
• /
• 1995

When ceramic membrance was made from metal salt solution in place of metal akoxide solution, crack free and good adhesion to supporter was optimized for sol stability and good adhesion force. A starting sol was prepared from aluminum oxychloride aqueous solutjion in order to inhibit the grain growthof Al2O3 during heat treatment. The crack free dip coating can't be achieved in 1mol/ι zirconium oxychloride solution because of the high viscosity which interferes with the hydration copolymerization between Al3+ ion and Zr4+ ion. Thus Al2O3-ZrO2 sol stability and viscosity for dip coating was effective when 0.01 mol/ι zirconium oxychloride was added. The minimizing of crack and achieving better adhesion to the supporter wa obtained by microwave drying, surfactant addition and ultrasonic dip coating in wet atmosphere. The result seems to minimize the capillary force and improve the adhesive ability to supporter during the process. Where the average pore size of Al2O3-ZrO2 ultrafilter ceramic membrane measured 17 Å by the BET method and observed γ-Al2O3 phase with tetragonal zirconia after firing at 700℃.

• 한국염색가공학회지
• /
• 제11권1호
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.

• Journal of Biosystems Engineering
• /
• 제39권2호
• /
• pp.96-100
• /
• 2014

Purpose: The objective of this study was to develop a classification index and the grade levels for a five-grade energy efficiency classification of agricultural dryers in Korea. Methods: The classification index and the grade levels were determined by using the performance test data published by the FACT over the last eight years to reflect a state of the art technology for agricultural dryers in Korea. The five grades were designed to have the classified dryers distributed normally over the grades with 15% for the $1^{st}$ grade, 20% for the $2^{nd}$ grade, 30% for the $3^{rd}$ grade, 20% for the $4^{th}$ grade and 15% for the $5^{th}$ grade. Results: The classification index was defined as the total amount of fuel and electrical energy consumed per 1% of the wet basis moisture content evaporated from a unit mass of grain or agricultural crops during the drying process: 1 MT of paddy rice for grain dryers and 1 kg of red pepper for agricultural crop dryers as the standard mass. Conclusions: The grade levels for the five-grade energy efficiency classification of grain dryers, kerosene dryers, and electric dryers were proposed in terms of the classification index value.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.78-86
• /
• 2014

Since cellulose nanofibrils (CNF) has large specific surface area and high water holding capacity, it is very difficult task to remove water from the CNF suspension. However, dewatering of CNF suspension is a prerequisite of following processes such as mat forming and drying for the application of CNF. In this study, we evaluated the drainage of cellulose fibers suspension under vacuum and pressure conditions depending on the number of grinding passes. Also, the effect of the addition of cationic polyelectrolyte on dewatering ability of CNF suspension was investigated. Regardless of dewatering condition, the total drained water amount as well as the drainage rate were decreased with an increase in the number of grinding passes. Pressure dewatering equipment enables us to prepare wet CNF mat with relatively higher grammage. The cationic polyelectrolytes improved the dewatering ability of CNF suspension by controlling the zeta potential of CNF. The fast drainage was obtained when CNF suspension had around neutral zeta potential.

• 수산해양기술연구
• /
• 제34권2호
• /
• pp.185-190
• /
• 1998

The aim of this study was to develop the artificial trap baits being able to replace the natural anchovy or sardine baits. The fishing trials for evaluating the fishing efficiencies of the artificial baits were conducted with commercial traps at coastal areas near Tongyoung, southern Korea. The preferable artificial baits which were made of minced anchovy, sardine, mackerel, or fish surplus products mixed with wheat flour into dry or wet pelleted or crumbled types, were showed some merits as the following. \circled1 Fishing efficiencies of the artificial baits were same or little higher level than that of the natural bait anchovy; \circled2 bait cost were same or little lower level; \circled3 dry artificial baits stocked in the room condition showed good fishing efficiencies; \circled4 making of artificial baits were very simple; \circled5 there were no harm to the fish and little pollution to the environment; \circled6 the releasing rate of attractants in the artificial or natural bait showed similar patterns. The artificial baits using the fish by-products which were vacuum freeze-drying extract of boiled anchovy or tunas extract, showed lower catches in the conger eel, Coner miriaster, but similar catches in the crabs, mainly Charybdis japonica, to the those of natural anchovy bait.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.89-89
• /
• 2013

Rare earth (RE) - transition metal based high energy density magnets are of immense significance in various engineering applications. $Nd_2Fe_{14}B$ magnets possess the highest energy product and are widely used in whole industries. Simultaneously, composite alloys that are cheap, cost effective and strong commercially available have drawn great attention, because rare-earth metals are costly, less abundant and strategic shortage. We designed rare-earth free alloys and fabrication process and developed novel route to prepare $Nd_2Fe_{14}B$ powders by wet process employing spray drying and reduction-diffusion (R-D) without the use of high purity metals as raw material. MnAl-base permanent magnetic powders are potentially important material for rare-earth free magnets. We have prepared the nano-sized MnAl powders by plasma arc discharge and micron-sized MnAl powders by gas atomization. They showed good magnetic property, compared with that from conventional processes. $Nd_2Fe_{14}B$ powders with high coercivity of more than 10 kOe were successfully synthesized by adjusting R-D step, followed by precise washing system. It is considered that this process can be applied for the recycling of RE-elements extracted from ewaste including motors.

• 한국재료학회지
• /
• 제11권9호
• /
• pp.740-744
• /
• 2001

The $Y_2SiO_5:Ce$ phosphors were synthesized by sol-gel technique in order to improve the performance of blue emitting phosphors for field emission display(FED). The resulted$Y_2SiO_5:Ce$ phosphors enhanced the emission intensity. In addition, calcination temperature of sol-gel technique(1300~140$0^{\circ}C$) was lower than that of the solid state reaction(>1$600^{\circ}C$). Under 365 nm and low voltage electron excitations. $Ce^{3+}$ -activated $Y_2SiO_5$phosphors showed blue emission band with a range of 400~ 430nm. Especially, 2mol% $Ce^{3+}$ doped $Y_2SiO_5:Ce$phosphors showed the maximum emission intensity. We have also controlled drying temperature of wet gel, pH, and $H_2O$/TEOS molar ratio for the optimum condition of TEOS hydrolysis.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.822-826
• /
• 1992

SiO2 doped sapphire single crystals were grown by Verneuil method using feed material which prepared by adding SiO2 in Al2O3. Crystal growing were attempted with varing doping amount of SiO2 from 0.01 to 1.0 wt% and when the doping amount of SiO2 were 0.01~0.04 wt%, single crystals could be attained. Starting materials for feed powder were 99.99% purity alumina and extra pure SiO2 powder. Mixing these two materials by wet milling for 24 hours and drying the mixture and then was calcined at 900~110$0^{\circ}C$ for 2~4 hours. The grown crystals had yellowish color and were somewhat transparent. During growing process the flow range of oxygen was 5~7.5ι/min and of hydrogen was 13~25ι/min, the average growth rate was 7.0~11 mm/hr. The pressure of gases were fixed at 5psi. The color of crystal was appeared and mechanical property of sapphire was developed by doping of SiO2.