• Elastomers and Composites
• /
• 제56권3호
• /
• pp.152-163
• /
• 2021

Liquid butadiene rubber (LqBR) is used as a processing aid and plays a vital role in the manufacture of high-performance tire tread compounds. In this study, center-functionalized LqBR (C-LqBR) was polymerized with different vinyl content via anionic polymerization. The effects of the vinyl content on the properties of the compounds were investigated by partially replacing the treated distillate aromatic extract (TDAE) oil with C-LqBR in silica-filled rubber compounds. C-LqBR compounds showed a low Payne effect and Mooney viscosity regardless of the vinyl content, because of improved silica dispersion due to the ethoxysilyl group. As the vinyl content of C-LqBR increased, the optimum cure time (t₉₀) increased owing to a decrease in the number of allylic hydrogen. Moreover, the glass transition temperature (T_g) of the compound increased, and snow traction and abrasion resistance performance decreased, whereas wet grip improved. The energy loss characteristics revealed that the hysteresis attributed to the free chain ends of C-LqBR was dominant.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.289-299
• /
• 2020

Highly aromatic (HA) oils are common processing aids used in tire tread compounds. However, they often bleed and evaporate from the vulcanizates during tire use. Thus, the mechanical and dynamical properties of the tire decrease. To overcome this problem, we investigated nonfunctionalized liquid butadiene rubber (LBR-305, Kuraray) and center-functionalized liquid butadiene rubber (C-LqBR), polymerized by anionic polymerization. In addition to the liquid butadiene rubbers, p-tert-octylphenol (P-Resin) and C5 hydrocarbon (H-Resin) tackifier resins, which can induce entanglement of rubber compounds, were researched as a processing aid to solve the bleeding problem. Liquid butadiene rubbers have significantly reduced extraction loss by crosslinking with the main rubber chain. They have also increased the abrasion resistance and showed similar or better mechanical and dynamical properties against HA oils. However, resin compounds did not show differences in extraction loss compared to HA oil compounds; instead, they showed increased wet traction.

• 한국환경농학회지
• /
• 제25권4호
• /
• pp.289-296
• /
• 2006

Various drying conditions, temperatures (40 to $80^{\circ}C$) and durations (overnight to 72 hrs), for the particulate organic matter (POM) fraction after wet-sieving size fractionation have been applied for determination of POM contents in the weight loss-on-ignition method. In this study, we investigated the optimum drying condition for POM fraction in quantification of POM and/or mineral-associated organic matter (MOM; usually indirectly estimated). The influence of the drying conditions on quantifying POM was dependent upon soil properties, especially the amount of soil organic components. In relatively high organic soils (total carbon > 40 g/kg in this study), the POM values were significantly higher (overestimated) with drying at $55^{\circ}C$ than those values at $105^{\circ}C$, which were, for example, 173.2 and 137.3 mg/kg, respectively, in a soil studied. However, drying at $55^{\circ}C$ for longer than 48 hrs of periods produced consistent POM values even though the values were much higher than those at $105^{\circ}C$. Thus, indirect estimates of MOM (MOM = SOM-POM) also tended to be significantly impacted by the dry conditions. Therefore, we suggest POM fractions should be dried at $105^{\circ}C$ for 24 hrs as determining POM and MOM contents. If the POM traction is needed to be dried at a lower temperature (e.g. $55^{\circ}C$) with a specific reason, at least 48 hrs of drying period is necessary to obtain consistent POM values, and a moisture correction factor should be determined to adjust the values back to a $105^{\circ}C$ weight basis.

• 한국도로학회논문집
• /
• 제3권3호
• /
• pp.111-118
• /
• 2001

초대형 점보 항공기의 출현으로 인하여 활주로 표면의 마찰저항 성능이 중요하게 되었다. 우천시나 겨울철과 같은 특정한 기후에서 활주로 표면은 수막현상과 마찰력의 손실이 발생하여 항공기의 브레이크 기능이 저하되어 제동력을 잃게 된다. 이러한 문제를 해결하기 위해 많은 연구가 미국항공우주국, 미공군, 미연방항공청 등에 의해 수행되었다. 그 결과 다양한 종류의 마찰저항이 끈 포장표면 처리 방법이 개발되었다. 이러한 설계방법 가운데 대표적인 방법이 그루빙이다. 포장 그루빙 공법은 활주로 표면에 마찰저항을 증가시키고 수막현상을 감소시켜주는 장점이 있는 것으로 보고되고 있다. 본 연구는 인천국제공항의 A-2구간에 수행된 건식 그루빙의 시공결과를 평가한 것이다. 그루빙 시공중에 온도 게이지를 사용하여 포장체+의 온도를 측정하고 건식 그루빙중에 온도변화를 측정하였으며 컷트날의 마찰로 발생하는 그루빙 시공이 완료된 활주로에 물을 살수하고 뮤 미터와 수심측정기를 사용하여 마찰계수와 수심을 계측하였다. 시험결과, 그루빙은 포장체에 손상을 주지 않았으며 활주로 표면은 마찰저항이 증가하고 수막현상을 감소하는 효과가 현저하게 나타나서 건식 그루빙의 효과는 매우 큰 것으로 평가되었다.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.344-350
• /
• 1993

The purpose of this study is to develop design equations to calculate optimum specifications and dimensions such as weight, engine horsepower, etc. of the tractor necessary to perform stable rotary tillage. The main results of this study are as follows. 1. A wheel-lug ought to receive a special resistance in downward direction which resists the lug's upward motion on wet sticky soil surface. The authors introduce a new academic name of the "lift resistance(上昇抵抗力, 상승저항력)" for such a force which resists retraction of a wheel lug from the soil in the upward trochoidal motion. This force is composed of the frictional force acting on the trailing and the leading lug side, and the "perpendicular adhesion(鉛直付着力, 연직부착력)" acting on the lug face and the undertread face on adhesive soil. 2. The "lift resistance ratio(上昇抵抗力係數, 상승저항력계수)" and the "perpendicular adhesion ratio(鉛直付着力係數, 연직부착력계수)" were defined, which are something similar to the definition of the motion resistance ratio, the traction coefficient, etc. 3. The design equation of the optimum weight of a rotary tiller mounted on the tractor derived by calaulating the forces acting on the rotary blades. 4. The design equations to calculate optimum specifications and dimensions such as weight, engine horsepower, etc. of the tractor necessary to perform stable rotary tillage were derived. It becomes clear that the optimum weight of a rotary tiller and a tractor can be estimated in planning design by means of putting about 21 design factors of the target into the equation. These equations are useful for planning design to estimate the optimum dimensions and specifications of a rotary tiller as well as a tractor by the use of known and/or unknown design parameters.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.201-208
• /
• 2013

본 연구는 황과 가교 촉진제의 함량이 달리 적용된 acrylonitrile styrene-butadiene rubber (AN-SBR)/silica 컴파운드가 타이어 트레드 컴파운드의 특성에 미치는 영향에 대해 연구하였다. 실험 결과, 가교제 및 가교촉진제의 함량이 증가할수록 가교 반응성이 증대되어 가교속도 및 컴파운드의 가교도가 상승하였다. 또한 내마모 특성 뿐만 아니라 경도, 모듈러스와 같은 컴파운드의 기계적 특성은 높은 가교도에 기인하여 향상되었다. 동적 점탄 특성에서는 가교도의 증가와 함께 유리전이온도 ($T_g$)가 상승하여 $0^{\circ}C$ 영역에서의 tan ${\delta}$ 값이 향상되었고, $60^{\circ}C$ 영역에서의 tan ${\delta}$ 값이 감소되었다. 초기 가교 속도 ($t_1$)는 $60^{\circ}C$의 tan ${\delta}$ 값과 선형적인 관계를 나타내었다. 이는 가교제의 증량으로 초기 가교 속도 ($t_1$)가 빨라져 조기에 가교가 시작됨으로써 filler network 의 발달을 억제시킨 결과에 따른 것으로 판단된다. 이러한 결과는 AFM (atomic force microscopy)을 통하여 열처리된 컴파운드의 표면 관찰에서도 확인할 수 있었다. 따라서, 빠른 초기 가황 반응에 기인한 실리카의 re-agglomeration 감소는 $60^{\circ}C$에서의 tan ${\delta}$를 결정하는 매우 중요한 변수임을 알 수 있다.