• Journal of the Korean Wood Science and Technology
• /
• 제17권2호
• /
• pp.20-25
• /
• 1989

This study was carried out in order to investigate the treatment effect of PEG soln which is a common dimensional stabilizer to green log. sawing panel etc, on bonding product including plywood widely-used in secondary processing unit. The 30% concentration of aqueous PEG soln. with molecular weight of 400, 1.000 and 4,000 were prepared respectively, and also dipping the veneer in the PEG soln. spreading the PEG soln. on veneer and mixing the PEG soln. in the adhesive were allowed. Then the ratio of PEG impregnation on veneer, the adhesive strength of plywood were epitomized as follows: The ratio of impregnation by PEG 4,000 at dipping condition was highest. while that by PEG 400 at same condition was lowest. However, the effect of PEG molecular weight on the ratio of impregnation at spreading condition did not occur. 2. The adhesive strength was great in the order of 4,000>400>1,000 in molecular weight of PEG at dipping and spreading conditions. In case of mixing the PEG soln. in the adhesive, the adhesive strength was great in the order of 400>1,000>4,000 in molecular weight of PEG. Throughout three treatment conditions, PEG 400 was relatively favourable with about 10kg/$cm^2$ dry strength. 3. The adhesive strength was great 10 the order of spreading >dipping >mixing condition. 4. Although adhesive strength with the 30% concentration of aqueous PEG soln. was decreased by 35% and over, compared to control (non-treatment) adhesive strength, all types of PEG treatment except mixing the PEG soln. in the adhesive exceeded the standard dry strength for common use panel. 7.5kg/$cm^2$. 5. In warm water-proof test, the adhesive strengths by all PEG treatment conditions were less than the standard wet strength, 7.5kg cot, and also delamination of glue line occured mostly in mixing in the PEG soln. in the adhesive condition.

• 기술사
• /
• 제17권4호
• /
• pp.28-39
• /
• 1984

Experiments were carried out for the development of a processing method of soybean into full-fat or defatted flour, using two varieties of soybean (kwangkyo produced in Korea and Bragg produced in India) Samples were subjected to dry dehulling, size reduction and wet heat treatment processes to make soybean flours. The quality of soybean flours were evaluated, and the results obtained were summarized as follows. 1. Crude fiber content of dehulled soybean was under 3.0% which indicated satisfactory dehulling, and there was no significant difference in crude fibre content between two varieties. 2. When dehulled soybean was cracked into soy grits by a hammer mill, 98.71∼98.86％ of the soy grit was in the range of 10∼18 mesh which was the optimum size of particle for quick and uniform penetration of heat into the intra-particle air spaces. 3. Moisture content of soy flour after steam treatment at 15 psig for 5 to 30 min was only 0.29∼1.68% which did not hinder the next milling operation. 4. From the color analysis of soy flours, it was observed that the dominant wavelength for all the samples are in a very narrow range from 575 to 581 nm and the color variation was from yellow to yellowish orange. Twenty to twenty five ％ higher reflectance was observed in the defatted flours than full fat flours. The ％ chroma of the defatted flour slightly increased as the duration of steaming of soy grits increased, whereas that of the full-fat flour did not. 5. The protein extractability in the defatted flour at pH 7.6 showed progressive decrease in solubility from 48.40％ (Bragg), 75.20％ (kwangkyo) for untreated flours to 9.75％ (Bragg), 26.27％ (kwangkyo) for 30 min steaming. But Kwangkyo variety showed twice higher protein extractability than Bragg variety.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.344-349
• /
• 2006

[ $60{\sim}70nm$ ] 급의 design rule을 가진 고집적 반도체 소자를 제작하려면, 트랜지스터 형성 이후의 공정에서 thermal budget을 줄이기 위하여 공정의 온도를 낮추는 것이 중요하다. 본 연구에서는 고온의 습식 산화막을 대체할 수 있는 저온의 LPCVD (Low-Pressure Chemical Vapor Deposition) $SiO_2$(LTO : Low-Temperature Oxide) 박막 증착공정을 제시하였으며, ONO (Oxide/Nitride/Oxide) 구조의 커패시터를 형성하여 증착된 LTO 박막의 전기적인 신뢰성을 평가하였다. LTO 박막은 5 MV/cm 이하의 전기장 영역에서는 고온의 습식 산화막과 크게 차이가 없는 누설전류 특성을 보였으나, 더 높은 전기장의 영역에서는 훨씬 더 우수함을 보여주었다.

• 한국대기환경학회지
• /
• 제27권3호
• /
• pp.291-302
• /
• 2011

[ $PM_{10}$ ]measurements were made at two coastal sites, i.e., Taean and Gangneung, for summer to examine the characterization of water-soluble organic carbon (WSOC) and inorganic ionic species, and to investigate their difference between the sites. The fractions of three major inorganic water-soluble components ($NO_3^-$, $SO_4^{2-}$, and $NH_4^+$) at Taean and Gangneung sites were 30.6% (16.2~62.0%) and 25.6% (13.0~52.5%) of the $PM_{10}$, respectively. $SO_4^{2-}$ is the most dominant species of water-soluble ions at both sites, accounting for up to 20.5% (9.1~44.9%) and 16.3% (5.5~34.2%) of their respective PM10 mass concentrations. Using the paired T-test, $PM_{10}$ (p<0.01), $NO_3^-$ (p<0.05), $SO_4^{2-}$ (p<0.01), $NH_4^+$ (p<0.001), and WSOC (p<0.05) concentrations exhibited strong fluctuations on a daily basis between Taean and Gangneung sites. Relationship between the concentrations of $SO_x$ ($SO_4^{2-}+SO_2$) and CO indicates that the slopes of $SO_x$ /CO were 0.007 and 0.019 in the Taean and Gangneung sites, respectively. The smaller $SO_x$/CO slope in the Taean site could be related to the aged air with wet scavenging of $SO_x$ during transport. The correlation between the concentrations of CO and WSOC suggests that WSOC observed in the Gangneung ($R^2$=0.82) be transported from combustion-related sources, while the WSOC at the Taean site could be formed through atmospheric processing of primary volatile organic species during transport.

• 대한전자공학회논문지TC
• /
• 제42권11호
• /
• pp.101-106
• /
• 2005

초광대역 임펄스를 이용한 비파괴 지중 금속 매설물 탐지용 지반 탐사 레이더(Ground penetrating image radar:GPR)를 개발하였다. 탐사 지면의 상대 유전율을 측정하였고, 최대 탐사 깊이 1m 이내의 측정이 가능하도록 시스템을 설계하였다. 전체 경로 감쇄, 시스템의 크기, 해상도를 고려하여 최고 주파수 및 최저 주파수를 선택하였다. 선택된 주파수에 맞는 1 나노세컨더(ns) 이하의 상승 시간을 갖는 초광대역 임펄스를 선택하였으며, 사용한 임펄스의 주파수 범위를 고려하여 소형 평판형 초광대역 다이폴 안테나를 설계하였다. 또한, 지중으로부터 반사되는 신호를 수신하기 위해서 디지털 오실로스코프를 사용하였다. 측정은 monostatic 방식과 마이그레이션(migration) 기법을 사용하였다. 지중 매설물의 영상 처리를 위해서는 A-scan 및 B-scan 평균 제거 방식을 사용하였다. 개발된 시스템은 금속 물체와 비금속 물체가 매설된 실증 시험장에서 시험되었고, 수 센티미터 직경의 작은 지중 금속 매설물까지도 탐지할 수 있는 우수한 성능을 가짐을 보였다.

• 동아시아식생활학회지
• /
• 제3권2호
• /
• pp.1-13
• /
• 1993

This paper has examined and analyzed the ways of making Jang(Korean soybean sauce), vinegar and liquor in terms of food processes, which are mentioned in sooljip 5 and 6 Food collections of 'Kosa-sibi Jip', an encyclopaedia written in Chinese and published in 1789-the eleventh year of King Jung-jo of Chosun Dynasty. There respestively six items of nine items of and thirty three items of the recipe for making jang, vinegar and liquor, Soybean was a major material for making jang. And wheat flour and ground barley were added. Myun-jang was made from only flour. Dong-kook Jojang Bup(oriental soybean sauce preparation) which is the traditional Korean process for making jang from only soybean is recorded in this book. The cereals used in the nine items of the vinegar making recipe were rice(six times), wheat(twice), barley(three times) and wheat flour(once). And fruits are also used. Rice was most used of all these materials. The cereals used in the thirty three items of the liquor-making recipe were regular rice(50%), sticky rice(42.6%) and wheat flour(7.4%) In particular sticky rice was much used for Yakyee Rhue and Bok-sik Rhue for medications. The ways of processing cereals for liquor-making were Jee-ae-bop : steamed rice(52.9%), Jook:thick gruel with cereal (32.3%), Goo-mung Tuck: doughnut-shaped rice cake(8.8%) and Hin-moo-ree Tuck: shawith peless rice cake(2.9%). The three unique processes are as follows. First, in winter when the process of liquor-making did not go on because the jar was cold, the bottle with hot water in was put in the jar and so the aduquate temperature for liquor-making was maintained. Next, in warming up a small double boiler, they prevented effervescence by hanging down thread. Finally. in warming up in a double boiler, they sealed the mouth-piece of the jar and put a handful of wet rice when the rice was completely cooked, it was thought of as the sign that the process of liquor-making was done.

• 핵의학기술
• /
• 제12권1호
• /
• pp.74-77
• /
• 2008

The radiopharmaceuticals are routinely injected to blood vessel for acquiring PET image. For this reason, It is imperative that they undergo strict quality control measures. Especially, Sterility test is more important than any other quality control procedures. According to the FDA guideline, It requires filter integrity test used in the processing of sterile solutions. Among several methods, we can decide to use bubble point test. We usually use vented GS-filters (Millipore co., USA) which are sterilizinggrade (0.22 um pore size) and are placed upper site on product vial. After the synthesis of $^{18}F$-FDG, solutions wet the membrane in filter and then go into the product vial. By all synthesis steps have finished, we can observe the presence of the bubbles in the product vial. Since we have started this study, we have never found any bubbles in the product vial. Because the maximum pressure intensity of the filter which has set by manufacturer is up to 5 bars, but helium gas pressure is up to 1 bar in our module system. So, we can make 5 bars pressure using helium gas bombe and increase pressure up to 5 bars step by step. However, it does not happen to anything in vial.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.61-72
• /
• 2008

The UV-protection effect of green-tea dyed fabrics was reported in our previous studies. The chitosan was used as a natural mordant of cellulose fiber for green tea extract because chitosan is a natural bio-polymer. The increase in the UV protection property of summer cellulose fabrics, cotton and linen, upon the repetition of chitosan mordanting and green tea dyeing was observed. However, the physical property change would be followed by this repeated wet processing of the cellulose fabric. Therefore, the physical changes of the chitosan mordanted and green tea dyed cotton and linen fabrics were evaluated by KES-FB system. Tensile, shear, bending, compression, and surface characteristics were tested upon the repetition of mordanting and dyeing treatments. Linearity of tensile force increased in the treated cotton and linen samples. Tensile energy and resilience decreased in all treated fabrics. Shear stiffness increased in the treated cotton and linen in general. Shear hysteresis was increased in all cotton samples and some linen samples. In cotton, the bending rigidity in all treated cottons increased except C3G3. As the chitosan mordanting numbers increased, the bending rigidity tended to decrease. In linen, the bending rigidity and hysteresis increased in all treated samples. Compressional energy and resilience increased as the number of chitosan mordanting increased both in cotton and linen. This could be the result of the increase in thickness upon chitosan mordanting. Surface coefficient of friction increased in the treated cotton and linen in general. Surface roughness tended to increase in cotton.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• 한국작물학회지
• /
• 제47권
• /
• pp.107-123
• /
• 2002

This paper is intented to present a information of various aspects of quality related characteristics and standards for grades in maize. Maize is world's one of the three most popular cereal crops and a primary energy supplement and can contribute up to 30, 60, and 98% of the dairy diet's protein, net energy, and starch, respectively. Maize is also processed into industrial goods by wet or dry milling. Sweet corn is a leader among vegetable crops and its production for fresh or processing markets is a major industry in many countries. Over the years, the combined efforts of breeders and geneticists, biochemists, food scientists, and others have helped bring us to the point where we understand issues related to sweet corn quality. Traditional criteria for selecting corn hybrids have been based primarily on agronomic factors, including grain production, disease resistance, drought tolerance, and storage characteristics. Little emphasis has been placed on the quality and nutritional values of corn. Although there is widespread interest for value-enhanced corns have increased tremendously in the last five years, there is limited information available on the production and comparing the quality attributes of specialty grains with those of normal yellow dent corn. Most countries have developed national maize standards, aiming to provide a framework for trade, both internal and external. Where trading involves direct choice and price negotiation in front of the commodity, grading standards are rarely employed; quality is assessed visually and is influenced by end-use, and the price is determined more by local rather than national factors. The use of an agreed standard will provide an unambiguous description of the quality of the consignment and assist in the formation of a legally-binding contract. Standards can also be seen to protect consumers rights through setting limits to the amount of unsuitable or noxious material.