• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.609-617
• /
• 2000

This study is aimed at investigating an effect of HCl gas on selective reduction of NOx over a CuHM and $V_2O_5-WO_3/TiO_2$ catalyst. SCR process is the most effective method to remove NOx, but catalyst can be deactivated by the acidic gas such as HCl gas which is also included in flue gas from the incinerator. In dry condition of flue gas, the CuHM catalyst treated by HCl gas has shown higher NO removal activity than the fresh catalyst. The activity of the catalyst can be restored by treating at $500^{\circ}C$. On the contrary. $V_2O_5-WO_3/TiO_2$ catalyst is obviously deactivated by HCl and the deactivation increases in proportion to the concentration of HCl gas. The deactivated catalyst is not restored to it's original activity by heat treatment for regeneration. In wet flue gas stream, the CuHM catalyst has shown lower activity than fresh catalyst and $V_2O_5-WO_3/TiO_2$ catalyst was severely deactivated by HCl treatment. The activity loss of catalysts are mainly due to the decrease of Br$\ddot{o}$nsted acid site on the catalyst surface by $NH_3$ TPD. The change of BET surface area of CuHM catalyst after the reaction isn't observed but $V_2O_5-WO_3/TiO_2$ catalyst is observed. The amount of $Cu^{{+}{+}}$ and $V_2O_5$ is decreased after the reaction. From these results, it is expected that CuHM catalyst should be better than $V_2O_5-WO_3/TiO_2$ catalyst for its application to the incineration of flue gas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.121-129
• /
• 2014

Marine algal flora and community structure were seasonally investigated at four sites in the vicinity of the Igidae on the southern east coast of Korea from May 2010 to February 2011. A total of 66 species including 9 of Chlorophyta, 14 of Phaeophyta, 43 of Rhodophyta were found during the survey period. Among these species, 16 species were found throughout the year. Seasonal mean biomass in wet weight was 123.6 (spring), 2,061.6 (summer), 412.0 (autumn), 678.9 (winter) $g{\cdot}m^{-2}$. Maximum biomass was recorded in summer($2,061.6g{\cdot}m^{-2}$), and minimum was recorded in spring($123.6g{\cdot}m^{-2}$). Spatial maximum and minimum species number were recorded at station 3 and 4(50 species) and at station 1(47 species). At station 1, 2 directly exposure on Yongho and Daeyeon cheon (stream) run off, and discharge from Nambu sewage treatment plants near coastal area, species diversity was relatively low and dominant species were similar throughout four seasons. The R/P, C/P and (R+C)/P value reflecting flora characteristics were 3.07, 0.64 and 3.71, respectively. The flora investigated could be classified into six functional groups such as coarsely branch form 39.39 %, sheet form 30.30 %, thick leather form 13.64 %, filamentous form 12.12 %, crustose form 3.03% and jointed calcareous form 1.52 % during survey period. The number of marine algae species in Igidea were 96 species at 1996 to 1997 and 66 species at 2010 to 2011, respectively. The change of seaweed species is due to the pollution loaded from sewage treatment plant and stream. We thus recommend that the positive maintenance control method like sewage treatment, for the protection of seaweed bed should be proceeded to near coastal area.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.977-983
• /
• 2002

This study was performed to establish the precise and rapid method to distinguish croakers through the pigment analysis of colored imported white croakers for adultration. We surveyed the coloring behaviors, extraction test by water and organic solvent and using pigments such as targeting, curcumine, and azo dye products. The pigment of yellow croaker is not stained on wet cloth or tissue which is rubbed on epidermis of yellow croaker and was not eluted in water extraction test, while adulterated pigments were easily extracted by water and acetone, but edible diluted yellow, Yellow No. 4 and Yellow No. 5 were not extracted. Reactive pigment was detected easily by extraction with water and dispersed pigment was also detected by extraction test. As a result of discoloring characteristics of carotene having similar structure to yellow croaker and azo dye by oxidation and reduction, azo dyes were not discolored by oxidation with sodium percarbonate or peracetic acid but that were discolored by oxidation with Fenton reagent after 1hr and by hypochlorite promptly. On the other hand, carotenes were not discolored by sodium precarbonate and Fenton reagent but discolored by sodium hypochlorite after 2 hr and by peracetic acid promptly. Azo dyes were discolored by reduction with sodium hydrosulfite and sodium carbonate but carotenes were not discolored by these reagents. This discoloring test was applicable to detect adulterated pigments and other marine product.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.1
• /
• pp.59-73
• /
• 1982

Differences of lipids, especially total lipid composition, fatty acid and sterol composition of the flesh lipids between three species of cephalopods were investigated, since available researches concerning lipids in flesh tissues of the cephalopod are very limited. Extracted total lipid from the flesh tissues were fractionated by silicic acid column chromatography into three lipid classes of neutral lipids, glycolipids and phospholipids. The lipid compositions of total lipid and neutral lipids were estimated by the method of thin layer chromatography and TLC-scanner. The sterol compositions of unsaponifiable matters from total lipid were determined by using thin layer chromatography and gas-liquid chromatography. The fatty acid composition of each lipid class was also determined by gas-liquid chromatography. Total lipid contents of flesh tissues from three species of the cephalopods were 0.5 in Octopus vulgare, 0.8 in Octopus variabilis and $0.6\%$ in Loligo beka based on wet weight, the contents of total fatty acid in total lipid were 19.3, 47.8 and $38.4\%$, and the contents of unsaponifiable matters were 10.9, 18.8 and $41.1\%$, respectively. Total lipid was mainly composed of sterols and polar lipid-pigments as major components in each sample and the proportion of sterols and polar lipid-pigments to total lipid ranged from 27.0 to $35.5\%$ and 38.3 to $63.4\%$, respectively. The other lipid components of total lipid, e.g. triglycerides, free fatty acids, and carbohydrate-esterified sterols were determined as a minor components. The major component fatty acid in total lipid was palmitic acid and additionaly it chiefly consisted of the other unsaturated acids such as oleic, linoleic, octadecatetraenoic and eicosapentaenoic acid as major components of the acid. The compositions of sterol in three species of cephalopod were found to contain mainly cholesterol for its proportion to total sterols was 82.4 to $89.1\%$. However the other sterols such as 22-dehydrocholesterol and 24-methylenecholesterol were determined in addition to cholesterol as a minor components. The result of fractional composition of lipid class in total lipid was that total lipid had large .amount of polar lipid and small amount of nonpolar lipid i, e, neutral lipid in each sample, and the contents of phospholipid were higher than that of glycolipid in polar lipid. Neutral lipid was mainly composed of free sterol as major components in each sample and its proportion of free sterols to total neutral lipid was 50.0 to $70.5\%$. The other lipid components of neutral lipid showing similar in quantity, esterified sterols, free fatty acids and triglycerides were determined as a minor components. The major components fatty acid in neutral lipid were palmitic, oleic and hexadecadienoic acid. Palmitic acid was the most abundant and additionaly oleic, linoleic, octadecatetraenoic and myristic acid were the major component fatty acid in glycolipid. But, especially, glycolipid of Loligo beka contained a higher amount of arachidonic acid which also consists of major component in addition to those of acids. Palmitic acid was the most abundant and additionaly, oleic, linoleic and octadecatetraenoic acid were the major component fatty acids in phospholipid.

• Korean Journal of Weed Science
• /
• v.13 no.4
• /
• pp.210-233
• /
• 1993

The herbicide has become indispensable as much as nitrogen fertilizer in Korean agriculture from 1970 onwards. It is estimated that in 1991 more than 40 herbicides were registered for rice crop and treated to an area 1.41 times the rice acreage ; more than 30 herbicides were registered for field crops and treated to 89% of the crop area ; the treatment acreage of 3 non-selective foliar-applied herbicides reached 2,555 thousand hectares. During the last 25 years herbicides have benefited the Korean farmers substantially in labor, cost and time of farming. Any herbicide which causes crop injury in ordinary uses is not allowed to register in most country. Herbicides, however, can cause crop injury more or less when they are misused, abused or used under adverse environments. The herbicide use more than 100% of crop acreage means an increased probability of which herbicides are used wrong or under adverse situation. This is true as evidenced by that about 25% of farmers have experienced the herbicide caused crop injury more than once during last 10 years on authors' nationwide surveys in 1992 and 1993 ; one-half of the injury incidences were with crop yield loss greater than 10%. Crop injury caused by herbicide had not occurred to a serious extent in the 1960s when the herbicides fewer than 5 were used by farmers to the field less than 12% of total acreage. Farmers ascribed about 53% of the herbicidal injury incidences at their fields to their misuses such as overdose, careless or improper application, off-time application or wrong choice of the herbicide, etc. While 47% of the incidences were mainly due to adverse natural conditions. Such misuses can be reduced to a minimum through enhanced education/extension services for right uses and, although undesirable, increased farmers' experiences of phytotoxicity. The most difficult primary problem arises from lack of countermeasures for farmers to cope with various adverse environmental conditions. At present almost all the herbicides have"Do not use!" instructions on label to avoid crop injury under adverse environments. These "Do not use!" situations Include sandy, highly percolating, or infertile soils, cool water gushing paddy, poorly draining paddy, terraced paddy, too wet or dry soils, days of abnormally cool or high air temperature, etc. Meanwhile, the cultivated lands are under poor conditions : the average organic matter content ranges 2.5 to 2.8% in paddy soil and 2.0 to 2.6% in upland soil ; the canon exchange capacity ranges 8 to 12 m.e. ; approximately 43% of paddy and 56% of upland are of sandy to sandy gravel soil ; only 42% of paddy and 16% of upland fields are on flat land. The present situation would mean that about 40 to 50% of soil applied herbicides are used on the field where the label instructs "Do not use!". Yet no positive effort has been made for 25 years long by government or companies to develop countermeasures. It is a really sophisticated social problem. In the 1960s and 1970s a subside program to incoporate hillside red clayish soil into sandy paddy as well as campaign for increased application of compost to the field had been operating. Yet majority of the sandy soils remains sandy and the program and campaign had been stopped. With regard to this sandy soil problem the authors have developed a method of "split application of a herbicide onto sandy soil field". A model case study has been carried out with success and is introduced with key procedure in this paper. Climate is variable in its nature. Among the climatic components sudden fall or rise in temperature is hardly avoidable for a crop plant. Our spring air temperature fluctuates so much ; for example, the daily mean air temperature of Inchon city varied from 6.31 to $16.81^{\circ}C$ on April 20, early seeding time of crops, within${\times}$2Sd range of 30 year records. Seeding early in season means an increased liability to phytotoxicity, and this will be more evident in direct water-seeding of rice. About 20% of farmers depend on the cold underground-water pumped for rice irrigation. If the well is deep over 70m, the fresh water may be about $10^{\circ}C$ cold. The water should be warmed to about $20^{\circ}C$ before irrigation. This is not so practiced well by farmers. In addition to the forementioned adverse conditions there exist many other aspects to be amended. Among them the worst for liquid spray type herbicides is almost total lacking in proper knowledge of nozzle types and concern with even spray by the administrative, rural extension officers, company and farmers. Even not available in the market are the nozzles and sprayers appropriate for herbicides spray. Most people perceive all the pesticide sprayers same and concern much with the speed and easiness of spray, not with correct spray. There exist many points to be improved to minimize herbicidal phytotoxicity in Korea and many ways to achieve the goal. First of all it is suggested that 1) the present evaluation of a new herbicide at standard and double doses in registration trials is to be an evaluation for standard, double and triple doses to exploit the response slope in making decision for approval and recommendation of different dose for different situation on label, 2) the government is to recognize the facts and nature of the present problem to correct the present misperceptions and to develop an appropriate national program for improvement of soil conditions, spray equipment, extention manpower and services, 3) the researchers are to enhance researches on the countermeasures and 4) the herbicide makers/dealers are to correct their misperceptions and policy for sales, to develop database on the detailed use conditions of consumer one by one and to serve the consumers with direct counsel based on the database.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.4
• /
• pp.451-463
• /
• 2006

Background : Reactive oxygen species (ROS) take center stage as executers in ventilator-induced lung injury (VILI). The protein with DNA-damage scanning activity, poly (ADP-ribose) polymerase-1 (PARP1), signals DNA rupture and participates in base-excision repair. Paradoxically,overactivation of PARP1 in response to massive genotoxic injury such as ROS can induce cell death through ${\beta}$ -nicotinamide adenine dinucleotide ($NAD^+$) depletion, resulting in inflammation. The purpose of this study is to investigate the role of PARP1 and the effect of its inhibitor in VILI. Methods : Forty-eight male C57BL/6 mice were divided into sham, lung protective ventilation(LPV), VILI, and PARP1 inhibitor (PJ34)+VILI (PJ34+VILI) groups. Mechanical ventilator setting for the LPV group was $PIP\;15cmH_2O$ + $PEEP\;3cmH_2O$ + RR 90/min + 2 hours. The VILI and PJ34+VILI groups were ventilated on a setting of $PIP\;40cmH_2O$ + $PEEP\;0cmH_2O$ + RR 90/min + 2 hours. As a PARP1 inhibitor for the PJ34+VILI group, 20 mg/Kg of PJ34 was treated intraperitoneally 2 hours before mechanical ventilation. Wet-to-dry weight ratio and acute lung injury (ALI) score were measured to determine the degree of VILI. PARP1 activity was evaluated by using an immunohistochemical method utilizing biotinylated NAD. Myeloperoxidase (MPO) activity and the concentration of inflammatory cytokines such as tumor necrosis factor $(TNF)-{\alpha}$, interleukin $(IL)-1{\beta}$, and IL-6 were measured in bronchoalveolar lavage fluid (BALF). Results : In the PJ34+VILI group, PJ34 pretreatment significantly reduced the degree of lung injury, compared with the VILI group (p<0.05). The number of cells expressing PARP1 activity was significantly increased in the VILI group, but significantly decreased in the PJ34+VILI group (p=0.001). In BALF, MPO activity, $TNF-{\alpha}$, $IL-1{\beta}$, and IL-6 were also significantly lower in the PJ34+VILI group (all, p<0.05). Conclusion : PARP1 overactivation plays a major role in the mechanism of VILI. PARP1 inhibitor prevents VILI, and decreases MPO activity and inflammatory cytokines.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.149-158
• /
• 1993

This is a retrospective analysis of 135 patients with invasive carcinoma of the uterine cervix treated with curative radiotherapy from March 1983 through October 1989 at the Department of Therapeutic Radiology, Kang-Nam 51. Mary's Hospital. Among them, 78 patients received radiotherapy alone and 42 patients treated with neoadjuvant chemotherapy followed by radiotherapy and 15 patients were lost to follow up. All patients had follow up from 2 to 106 months (median; 62 months). Age of the patients ranged from 32 to 79 years at presentation (median; 59 years). According to FIGO classification, there were 20 ($16.7{\%}$) in stage IB, 19 ($15.8{\%}$) in stage IIA,49 ($40.8{\%}$) in stage IIB, 5 ($4.2{\%}$) in stage IIIA, 13 ($10.8{\%}$,) in stage IIIB,14 ($11.7{\%}$) in stage IVA. The pathological classification showed 96 ($80.0{\%}$) squamous cell carcinomas, 5 ($4.2{\%}$) adenocarcinomas and 19 ($15.8{\%}$) proven by cytology. The overall 5-year survival rates was $50.8{\%}$, and the 5-year survival rates by stage IB, IIA, IIB, IIIA, IIIB, IVA was $47.7{\%},\;70.2{\%},\;64.1{\%},\;40.0{\%},\;23.1{\%},\;14.3{\%}$, respectively. The 5-year survival rates was noted $51.2{\%}$ of radiotherapy alone and $50.4{\%}$of neoadjuvant chemotherapy followed by radiotherapy. The overall failure rate was $18.3{\%}$(22/120) including $11.7{\%}$ (14/120) locoregional failure, $5.8{\%}$ (7/120) distant metastasis and $0.8{\%}$(1/120) locoregional failure with distant metastasis. Treatment failure rates by the stages were $15{\%}$ (3/20) in stage IB. $10.5{\%}$ (2/19) in stage IIA, $10.2{\%}$, (5/49) in stage IIB, $20{\%}$ (1/5) in stage IIIA, $61.5{\%}$(8/13) in stage IIB, and $28.6{\%}$ (4/14) in stage IVA. The overall complication rate was $34.2{\%}$(41/120) including wet desquamation $7.5{\%}$, (9/120), diarrhea $6.7{\%}(8/120), radiation proctitis $5.8{\%}$(7/120) in decreasing order. A multivariate analysis of factors influencing the survival showed patient age (p < 0.0291), FIGO stage (p<0.0001), Karnofsky performance status (p<0.0043), initial hemoglobin level (p<0.0001), and intracavitary radiation (p<0.0004), but, no significancy in histology (p<0.29) and treatment method (p < 0.87).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.96-101
• /
• 2003

This study was done to analyze the contents of minerals, to compare the measured values of calcium and the labeled values in food labeling and to analyze the ratio of calcium to other minerals in 43 calcium-fortified Food products sold in markets in Seoul, Korea. Content of minerals such as Ca, P, Mg, Na, K, Fe, Cu, Zn was measured by atomic absorption or colorimetric method after dry-ashing or wet-ashing. The measured values of calcium were ranged 65.5~343.9% of the labeled values in 43 calcium-fortified products. In 21 calcium-fortified food products, the measured calcium values were ranged 120～160% of the labeled values, and in three drinks those were less than 80% of the labeled, which is not acceptable to the food regulation. The ratios of Ca:P were 2.63$\pm$1.99 (mean$\pm$SD) in grain Products, 1.79$\pm$0.39 in Ramyuns, 2.80$\pm$0.53 in retort pouch food products and 8.35$\pm$12.87 in drinks. The Ca:Fe ratios were 126.33$\pm$44.36 in grain products, 130.65$\pm$34.67 in Ramyuns, 120.31$\pm$71.15 in retort pouch food products and 700.25$\pm$553.70 in drinks. The ratios of Ca:Mg were 11.86$\pm$5.40 in grain products, 9.29$\pm$1.34 in Ramyuns, 9.09$\pm$2.09 in retort pouch food products and 32.50$\pm$41.35 in drinks. The P:Mg ratios were 4.11$\pm$1.54 in grain products, 4.17$\pm$0.67 in Ramyuns, 2.58$\pm$0.45 in retort pouch food Products and 2.59$\pm$2.50 in drinks. These results suggest calcium contents and the ratio of calcium contents to other minerals in calcium-fortified food products should be strictly controlled.