• 한국정보처리학회논문지
• /
• 제6권5호
• /
• pp.1203-1211
• /
• 1999

Checkpointing is the one of fault-tolerant techniques to restore faults and to restart job fast. Checkpointing algorithms in distributed systems have been studied for many years. These algorithms can be classified into synchronous Checkpointing algorithms and asynchronous Checkpoiting algorithms. In this paper, we propose an independent Checkpointing algorithm that has a minimum Checkpointing counts equal to periodic Checkpointing algorithm, and relatively short rollback distance at faulty situation. Checkpointing count is directly related to task completion time in a fault-free situation and short rollback distance is directly related to task completion time in a faulty situation. The proposed algorithm is compared with the previously proposed asynchronous Checkpointing algorithms using simulation. In the simulation, the proposed Checkpointing algorithm produces better results than other algorithms in terms of task completion time in fault-free as well as faulty situations.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.81-86
• /
• 2006

We investigated resistance development in $Au/YBa_2Cu_3O_7(YBCO)$ thin film meander lines during high-power faults. The meander lines were fabricated by patterning 300 nm thick YBCO films coated with 200 nm thick gold layers into meander lines. A gold film grown on the back side of the substrate was also patterned into a meander line. The front meander line was connected to a high-power fault-test circuit and the back line to a DC power supply. Resistance of both lines was measured during the fault. They were immersed in liquid nitrogen during the experiment. Behavior of the resistance development prior to quench completion could be understood better by comparing resistance of the front meander lines with that of the back. Quench completion point could be determined clearly. Resistance and temperature at the quench completion point were not affected by applied field strength. The experimental results were analyzed quantitatively with the concept of heat transfer within the meander lines/substrate and to the surrounding liquid nitrogen. In analysis, the fault period was divided into three regions: flux-flow region, region prior to quench completion, and region after quench completion. Resistance was calculated for each region, reflecting the observation for quench completion. The calculated resistance in three regions was joined seamlessly and agreed well with data.

• 한국전자거래학회지
• /
• 제17권2호
• /
• pp.149-163
• /
• 2012

물류 시스템은 다양한 프로세스에 걸친 한정된 자원들의 작업을 통해 고객에게 서비스를 제공한다. 이와 같은 복잡한 환경에서 높은 서비스 수준을 유지하기 위해서는 프로세스 진행 상황에 대한 실시간 모니터링과 그를 통한 성과 달성도의 지속적인 관리가 필수적으로 요구된다. 본 연구에서는 컨테이너 터미널을 대상으로 선박 물류 프로세스의 서비스 완료시간을 예측하는 방법론을 제시한다. 이를 위해 먼저 선박에서 컨테이너를 싣고 내리는 프로세스에 영향을 미치는 요인을 파악한다. 그리고, 확인된 요인들 중 영향 정도를 직접적으로 측정하기 어려운 것에 대해 정량적인 값을 추정하는 방안을 개발한다. 서비스 완료 시간에 대한 실시간 예측은 의사결정 나무를 사용한다. 과거 프로세스 진행 이력을 바탕으로 의사결정 나무를 학습시킨 후, 특정 시점에서 실시간 요인의 상태를 이용하여 서비스 완료시간을 예측한다. 컨테이너 터미널 시뮬레이션 모형을 활용하여 본 연구에서 제시하는 방법론을 검증하였다.

• International Journal of Control, Automation, and Systems
• /
• 제1권3호
• /
• pp.339-350
• /
• 2003

In this paper, we propose a simultaneous multithreading (SMT) architecture that improves instruction throughput by exploiting instruction level parallelism (ILP) and thread level parallelism (TLP). The proposed architecture issues and completes instructions belonging to the same thread in exact program order. The issue and completion policy greatly reduces the design complexity and hardware cost of our architecture, compared with others that employ out-of-order issue and completion. On the other hand, when the instructions belong to different threads, the issue and completion orders for those instructions may not necessarily be identical to the fetch order. The processor issues instructions simultaneously from multiple threads to functional units by exploiting ILP and TLP, and by dynamic resource sharing. That parallel execution notably improves performance and resource utilization with minimal additional hardware cost over the conventional superscalar processors. This paper proposes an SMT architecture with grouping as well as one without grouping. Without grouping, all threads dynamically and flexibly share most resources. On the other hand, in the SMT architecture with grouping, in which resources and threads are divided into several groups for design simplification, resources are shared only among threads belonging to the same group as those resources. Simulation results show that our processors with four and eight threads improve performance by three or more times over the conventional superscalar processor with comparable execution resources and policies, and that reasonable grouping reduces the design complexity of SMT processors with little negative effect on performance.

• 무역상무연구
• /
• 제50권
• /
• pp.215-250
• /
• 2011

Korean won overseas construction projects worth 71.6 billion US Dollars in 2010, which exceeded that of 2009 by 45.6%. An overseas construction project is a transaction of large scale, long term project, many parties participating, deferred payment, and of high-technology. It contributes to foreign currency earning, and also leads the nation's export restructuring work towards high value-added one. There are various kinds of risks towards the relevant parties respectively, which are key elements in successfully performing the overseas construction project. There are completion risk, financing risk, operating risk, revenue risk etc, in an employer's place. A contractor may be confronted with payment risk, issuance risk of performance bond, financing risk, performance risk of sub-contractors, and exchange rate risk. In lenders place there are repayment risk, completion risk, and political risk in the host country. In order to mitigate risks, the parties shall take relevant measures or require relevant securities. A contractor needs to evaluate the credibility of an employer in respect of payment risk, and can also request export insurance cover by the Korea Trade Insurance Corporation(the former 'Korea Export Insurance Corporation"). An employer can require a contractor to provide performance bond in respect of completion risk, and employ a well-known first class bank as a mandated arranger to arrange financing with regard to completion risk. Lenders needs to evaluate the credibility of an employer and accomplish feasibility study of the project. Lenders can request insurance cover from export credit agency. Once the parties assess the respective risks and obtain relevant securities, the project will be successfully completed. The success of the project will be sure to bring the parties involved enormous profits and another opportunity to participate in overseas construction project afterwards.

• 무역상무연구
• /
• 제61권
• /
• pp.273-302
• /
• 2014

Project finance ("PF") is a method of raising long-term debt financing based on lending against the cash flow generated by the project alone. Project finance is a nonrecourse or limited recourse financing structure against the sponsors(or the investors). The debt terms in a project finance are not based on the creditor's credit support or on the value of the assets of the project. Lenders rely on the future cash flow to be generated by the project for debt repayment and interest, rather than the value of the project or the credit ratings of the sponsors. The non-recourse or limited recourse financing usually prompt potential project finance lenders to assess carefully all possible risks that might arise in a project to ensure that those risks are mitigated and controlled. In this respect, project finance is a opposite financing method of corporate finance. Project finance has rapidly grown over the last 20 years due to the worldwide process of privatization of public sector and development of natural resources. Global project finance volume reached the record USD 406.5 billion in 2011. In 2012, however, Global project finance volume dropped 6% to USD 382.3 billion. Infrastructure overtook Energy to lead all sectors with USD 113.6 billion. It is generally recognized that there are more and higher risks in project finance compared with corporate finance. Project finance is exposed to commercial risks as well as political risks. The main commercial risks are completion risks, environmental risks, operating risks, input supply risks, revenue risks, etc, and the main political risks are currency convertibility and transfer risks, expropriation risks, war and civil disturbance risks, risks of breach of government concession agreement, etc. Completion risks include permits risks, risks relating to the EPC Contractor, construction cost overrun, delay in completion, inadequate performance on completion, etc.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.327-330
• /
• 2007

기존의 시뮬레이션 일정기법은 최종공사기간(Project Completion Times: PCTs)이 정규분포를 따른다는 가정을 전제로 한다. 그러나 본 논문에서는 이 가정이 항상 옳은 것이 아니며, 이것이 잘못된 결과를 초래할 수 있다는 것을 검증한다. 이처럼 의문이 제기되지 않고 받아들여져 온 가정이 시뮬레이션 분석 결과에 어떠한 영향을 줄 수 있는지를 밝혀내는 리키스 정량화기법(risk Quantification method)을 MATLAB 알고리즘으로 구현하였으며, 네트워크의 모델링에서부터 시뮬레이션 출력 값들로 구성된 샘플집단들에 대한 분석에 이르기까지 전 단계를 MATLAB 프로그래밍으로 구현된 알고리즘을 사용하여 제기된 의문에 대한 답을 제시하였다. 특정 네트워크를 구성하는 엑티비티 기간 값들을 정의하는 확률분포함수의 종류를 다양하게 변화시켜 시뮬레이션 결과 값들 - 최종공사기간 값들 - 을 생성하고, 이처럼 생성된 시뮬레이션 출력 값들로 구성된 샘플집단들의 확률 통계적 특성을 분석하였다. 본 연구는 시뮬레이션을 기반으로 하는 일정관리기법의 신뢰성을 향상시키며, 일정관련 리시크 분석의 정확성을 향상시키는데 기여할 것이다.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.130-137
• /
• 2013

In this paper, we consider a two-agent scheduling with sequence-dependent exponential learning effects consideration, where two agents A and B have to share a single machine for processing their jobs. The objective function for agent A is to minimize the total completion time of jobs for agent A subject to a given upper bound on the objective function of agent B, representing the makespan of jobs for agent B. By assuming that the learning ratios for all jobs are the same, we suggest an enumeration-based backward allocation scheduling for finding an optimal solution and exemplify it by using a small numerical example. This problem has various applications in production systems as well as in operations management.

• 대한인간공학회지
• /
• 제19권2호
• /
• pp.33-45
• /
• 2000

Present study was performed to compare different types of teleoperation performance measures. A modified Cooper-Harper rating scale and a distance measure were newly introduced and compared to two traditional measures, the error rate and time-to-completion. Participants performed a simulated telerobotic task with varying visual display interfaces. The results of correlation analyses revealed that the modified Cooper-Harper ratings had a close association with the error rate measure. The distance measure also appeared to be a consistent performance measure, which accounted for both the error rate and time-to-completion. A further analysis, however, showed that the effectiveness of each performance measure varied with the level of task difficulty. The results imply that the choice of performance measure should be made based on the task difficulty as well as the particular task being studied. The results revealed here also have implication for performance measures of various display and control systems including aircraft navigation displays and tactical displays.

• 산업공학
• /
• 제17권2호
• /
• pp.242-248
• /
• 2004

Lot-streaming is the process of splitting a job (lot) into a number of smaller sublots to allow the overlapping of operations between successive machines in a multi-stage production system. A new genetic algorithm (NGA) is proposed for minimizing the mean weighted absolute deviation of job completion times from due dates when jobs are scheduled in a no-wait lot-streaming flow shop. In a no-wait flow shop, each sublot must be processed continuously from its start in the first machine to its completion in the last machine without any interruption on machines and without any waiting in between the machines. NGA replaces selection and mating operators of genetic algorithms (GAs), which often lead to premature convergence, by new operators (marriage and pregnancy operators) and adopts the idea of inter-chromosomal dominance. The performance of NGA is compared with that of GA and the results of computational experiments show that NGA works well for this type of problem.