• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.40-44
• /
• 1997

Along with the rapid growth in microelectronics and power electronics technologies, various advanced control methods have been successfully implemented in real time and shown to be useful in controlling CO2 arc welding systems with high dynamic performance. In this paper, the slope of welding currents is controlled not to be so high in the case of short circuit welding mode. This results in less spatter. In addition, the data-base is constructed for the optimal welding conditions.

• Journal of Welding and Joining
• /
• v.5 no.1
• /
• pp.64-72
• /
• 1987

The Weldability of gavannealed steel using spot welder has been studied. The Results obtained are a follows; 1) Welds size and strength were increased depending on the welding time and welding current. But, the increasing rate has been decreased. 2) Deposited zinc has affected on the wear of welding tips and growth of welds but has not affected the weld's structures. 3) On shear testing of the specimen, button fracture has been observed and the value was approximately 540Kg (welds dia. approximately .phi.4mm)

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.164-166
• /
• 2008

Ultrasonic welder joins with a horn and a booster for amplification of the mechanical displacement. This coupling generates other resonance points at a frequency range lower than the piezoelectric material's resonance frequency. Therefore, frequency variation range through PLL control was proposed in order to prevent reaction to these resonance points.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.289-294
• /
• 2002

This paper presents first results of an interdisciplinary research project for the development of an "intelligent" welding helmet. Contrary to conventional welding helmets the system allows a detailed observation both of the welding process and the environment. By methods of virtual and augmented reality additional information can be supplied to the welder. The system can be used for welding preparation, welding process observation and quality assurance.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.194-198
• /
• 1997

본 연구는 용접게에 퍼지이론을 적용하여 작업자의 비숙련성 및 용접모재의 형상에 따라 변동되는 아크상태에 항상 일정하게 유지되도록 하는 제어방식ㅇ르 제안한다. 기존의 방식은 작업자 스스로 아크상태를 판단하고 아크길이의 변화를 주었다. 이에 비하여, 퍼지 용접기는 적업자가 기준 용접전압 및 용접전류를 설정한 후, 용접을 할 때 발생하는 아크상태를 숙련자의 경험에 바탕을 둔 퍼지제어기를 이용한다. 그러므로써 퍼지제어기의 출력부가 출력전압을 조절하여 균일한 용접효과가 나오도록 하는데 목적을 두었다.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2644-2646
• /
• 1999

본 연구에서는 에너지절감 및 최적의 용접결과(최소 스패터 등), 변압기 소형화를 위해 16비트 마이크로컨트롤러를 적용한 고주파 인버터식 저항용접기 시스템을 구성하였으며, 용접파라미터의 순시 피드백과 통전시간 제어를 통해 용접조건에 맞는 최적의 용접전력을 모재에 공급할 수 있는 저항용접기를 구현하여 그 특성파악을 행하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.497-498
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.3
• /
• pp.69-77
• /
• 1978

스폿 용접 기구를 탄성체로 생각하여 접촉 응력과 용접봉의 최적 형상을 구하였다. 접촉 응력은 2차 계획법 문제로 바꾸어 해석하였고, 이에 필요한 용접봉과 피용접판의 Flexibility matrix 들은 유한 요소법의 프로그램인 SAPIV 를 사용하였다. 최애 접촉 응력을 최소로 하는 용접봉의 형상설계를 위해 축차적인 선형 계획법을 적용하고 특정한 경우의 해를 도시하였다. 최적의 용접봉 모양은 중심부가 오목하고 가장자리 부분이 볼록한 형태로 나타났다.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.13-16
• /
• 2001

High speed seam weldability of tin coated steels was investigated. Welding was performed by the laboratory wire seam welder that was equipped with process monitoring system Test results showed that increase in applied current and pressure reduced the total resistance across the welding electrodes. Lower and upper limits of welding current increased as the sheet thickness increased, while the acceptable welding condition range decreased. However, extremely low electrode pressure produced unstable welding condition range. The results also demonstrated that slower welding speeds widened the optimum welding heat input range.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2005.05a
• /
• pp.109-109
• /
• 2005