• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.668-673
• /
• 1994

The paper presents a simple method for calculating the sound exposure level (LAE) of helicopter noise. It is assumed that a helicopter is a nondirective point source and that A-weighted sound pressure level at an observation point can be expressed by an A-weighted power level and a simple function of the distance from the helicopter. We derived a formula for LAE by integrating the sound energy along a finite or an infinite flight segment. The values calculated form the formula agree well with the results of test flights in which three types of helicopters each were operated in three moving modes of approach, takeoff and level flyover.

• 대한임베디드공학회논문지
• /
• 제6권2호
• /
• pp.108-116
• /
• 2011

Non-line-of-sight (NLOS) error is the most common and also a major source of errors in wireless location system. A novel weighting factor (NWF) method is presented in this paper, based on the RSS(Received Signal Strength) measurements, path loss model and Circular Disk of Scatterers Model (CDSM). The proposed positioning method effectively weighted the TOA distance measurements for each Base Station (BS). Simulation results show that the proposed method efficiently weighted the distance measurements and achieve higher localization accuracy than that of Linear Line of Position (LLOP) and Believable Factor Algorithm (BFA).

• 방송공학회논문지
• /
• 제18권1호
• /
• pp.21-30
• /
• 2013

알려져 있지 않은 광원에 의한 색 변화는 대부분의 영상처리에서 중요한 문제이다. 색상 변화를 보상하기 위해서는 광원의 색상을 추정해야 한다. 이 때 광원에 의한 색 분포의 가정을 사용하게 되는데 이 가정을 만족하지 않는 화소를 사용하게 되면 정확한 추정이 이루어지지 않을 수 있다. 흔하게 사용되는 색 분포의 가정은 장면에서 표면 반사율의 평균은 무채색을 갖는다는 Grey-world 가정이다. 우리는 광원의 내재적인 특징을 바탕으로 카메라 응답 함수의 특성과 함께 화소의 값과 색도가 Grey-world 가정에 어떤 영향을 미치는지 분석하고 광원의 색상을 추정하기 위한 중요한 화소를 검출하기 위하여 가정을 잘 만족하는 화소에 가중치를 주는 방법과 가중치가 적용된 화소에 대해서 기존의 max-RGB 방법을 변형하여 각 채널의 행 방향과 열 방향으로 최대로 가중된 화소를 검출하는 방법을 제안한다. 제안한 방법은 다양한 실제 장면들에 대한 검증을 통해 기존의 다른 방법들에 비해서 정확하게 광원의 색을 추정함을 보였다.

• 한국대기환경학회지
• /
• 제24권6호
• /
• pp.662-673
• /
• 2008

Two hybrid receptor models, potential source contribution function (PSCF) and concentration weighted tracjectory (CWT), were compared for locating $PM_{2.5}$ sources contributing to the atmospheric $PM_{2.5}$ concentrations in Seoul. The source contribution estimates by chemical receptor model (CMB) receptor model were used to identify better source areas, Among the sources, soil, agricultural burning, marine aerosol, coal-fired power plant and Chinese aerosol were only considered for the study because these sources were more likely to be associated with the long-range transport of air pollutant. Both methods are based on combining chemical data with calculated air parcel backward trajectories. However, the PSCF analyses were performed with trajectories above the $75^{th}$ percentile criterion values, while the CWT analyses used all trajectories. This difference resulted in locating of different sources, which might be helpful to interpret locating of $PM_{2.5}$ sources, High possible source areas in source contribution of soil and agricultural burning contributing to the Seoul $PM_{2.5}$ were inland areas of Heibei and Shandong provinces (highest density areas of agricultural production and population) in China. The "Chinese aerosol" was used as a representative source for the $PM_{2.5}$ originated from urban area in China. High possible source areas for the aerosol were the cities in China where are relatively close to the receptor. This result suggests that Chinese aerosol is likely to be a useful tool in studies on source apportionment and identification in Korea.

• KNOM Review
• /
• 제23권1호
• /
• pp.10-17
• /
• 2020

최근 보안이 취약한 IoT 장치를 악용하는 분산 서비스 거부 공격의 위협이 확산됨에 따라 신속하게 공격을 탐지하고 공격자의 위치를 찾기 위해 소스측 서비스 거부 공격 탐지 연구가 활성화되고 있다. 또한, 소스측 탐지의 지역적 한계를 극복하기 위해 개별 사이트에 위치한 소스측 네트워크들의 탐지 결과를 공유하는 협력형 소스측 공격 탐지 기법도 활성화되고 있다. 이 논문에서는 통계적 가중치를 이용하는 협력형 소스측 분산 서비스 거부 공격 탐지 기법의 성능을 평가한다. 통계적 가중치는 개별 소스측 네트워크의 시간대에 해당하는 탐지율과 오탐지율을 기반으로 계산된다. 제안된 기법은 여러 지역에서 발생한 소스측 서비스 거부 공격 탐지 결과들을 수집하고 가중치를 부여하여 결과를 도출하고, 이를 통해 DDoS 공격 발생 여부를 결정한다. 실제 DNS 요청 트래픽을 기반으로 실험한 결과, 제안된 기법은 높은 공격탐지율을 유지하면서, 공격오탐율을 2% 줄일 수 있음을 확인하였다.

• 대기
• /
• 제24권2호
• /
• pp.245-251
• /
• 2014

Statistical trajectory analysis has been widely used to identify potential source regions for chemically and radiatively important chemical species in the atmosphere. The most widely used method is a statistical source-receptor model developed by Stohl (1996), of which the underlying principle is that elevated concentrations at an observation site are proportionally related to both the average concentrations on a specific grid cell where the observed air mass has been passing over and the residence time staying over that grid cell. Thus, the method can compute a residence-time-weighted mean concentration for each grid cell by superimposing the back trajectory domain on the grid matrix. The concentration on a grid cell could be used as a proxy for potential source strength of corresponding species. This technical note describes the statistical trajectory approach and introduces its application to estimate potential source regions of $CO_2$ enhancements observed at Korean Global Atmosphere Watch Observatory in Anmyeon-do. Back trajectories are calculated using HYSPLIT 4 model based on wind fields provided by NCEP GDAS. The identified $CO_2$ potential source regions responsible for the pollution events observed at Anmyeon-do in 2010 were mainly Beijing area and the Northern China where Haerbin, Shenyang and Changchun mega cities are located. This is consistent with bottom-up emission information. In spite of inherent uncertainties of this method in estimating sharp spatial gradients within the vicinity of the emission hot spots, this study suggests that the statistical trajectory analysis can be a useful tool for identifying anthropogenic potential source regions for major GHGs.

• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.148-159
• /
• 2003

Variation is the archenemy of quality. To reduce or control the variation in a complex production unit, firstly we need to identify the location of the root cause of the variation. This paper discusses the detection of variability and the techniques used for reduction of variation for a production unit consisting of many processes. In the first part of this paper, the background of variability detection in production systems is introduced which is then followed by a weighted network corresponding to correlation matrix of all processes. Based on the network and clustering criterion of maximum spanning tree, a classification of all processes is derived. Furthermore, the variation of each process in a class is determined by residual analysis. In the last part, the use of methods of robust design for the processes with a larger variability is discussed.

• 스마트미디어저널
• /
• 제4권4호
• /
• pp.47-55
• /
• 2015

최근 ICT 분야의 컴퓨팅 패러다임의 변화와 다양한 서비스를 지원하기 위한 VoIP 기술이 재조명 받고 있다. 본 논문에서는 Secured mobile VoIP 기반의 음성 서비스를 지원하기 위한 경량 가상화 기술인 Docker를 이용하여 소프트웨어 PBX인 오픈소스 Asterisk와 하드웨어 플랫폼, 그리고 모바일 단말기간의 시스템들을 설계 및 구현하였다. 그리고 이를 기반으로 네트워크 트래픽의 지연 테스트와 음성 보안 테스트를 글로벌 실환경에서 실증 테스트를 통해 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.133-142
• /
• 2018

Paper presents a comparative study of space vector pulse width modulation (SVPWM) switching sequences for Voltage Source Inverters (VSIs). Various SVPWM switching sequences are studied for two and three level VSIs in linear modulation index region. The computations of dwell times are presented for two and three level VSIs based on space vector geometry in a synchronized and optimized manner. The existing SVPWM switching sequences are implemented using Matlab / Simulink and in an experimental setup for three phase two and three level VSIs. The simulation and experimental waveforms of conventional SVPWM (CSVPWM) and bus clamped SVPWM (BCSVPWM) are demonstrated for two and three level inverter respectively. The performance of different SVPWM switching sequences are evaluated and presented based on weighted voltage total harmonic distortion (THD).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권9호
• /
• pp.4541-4554
• /
• 2019

This paper proposes a planar projection DV-hop location algorithm (PTCDV-hop) based on the LED semi-angle at half power (SAHP, which accounts for LED SAHP characteristics in visible light communication (VLC)) and uses the DV-hop algorithm for range-free localization. Distances between source nodes and nodes positioned in three-dimensional indoor space are projected onto a two-dimensional plane to reduce complexity. Circles are structured by assigning source nodes (projected onto the horizontal plane of the assigned nodes) to be centers and the projection distances as radii. The proposed PTCDV-hop algorithm then determines the position of node location coordinates using the trilateral-weighted-centroid algorithm. Simulation results show localization errors of the proposed algorithm are on the order of magnitude of a millimeter when three sources are used. The PTCDV-hop algorithm has higher positioning accuracy and stronger dominance than the traditional DV-hop algorithm.