• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1337-1344
• /
• 2014

The objective of an echo canceller connected to any end of a communication line such as digital subscriber line (DSL) is to compensate the outgoing transmit signal in the receiving path that the hybrid circuit leaks. The echo canceller working in a full duplex environment is an adaptive system driven by the local signal. Conventional echo canceller that implement the least mean square (LMS) algorithm provides a low computational burden but poor convergence properties. The length of the echo canceller will directly affect both the degree of performance and the convergence speed of the adaptation process. To cancel long time-varying echoes, the number of tap coefficients of a conventional echo canceller must be large, which decreases the convergence speed of the adaptive filter. This paper proposes an alternative technique for the echo cancellation in a telecommunication channel. The new technique employs the bi-directional least mean square (LMS) algorithm for adaptively computing the optimal set of the coefficients of the echo canceller, which is composed of weighted combination of both feedforward and feedback algorithms. Finally, Simulation results as well as mathematical analysis demonstrates that the proposed echo canceller has faster convergence speed than the conventional LMS echo canceller with nearly equivalent complexity of computation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4C
• /
• pp.254-264
• /
• 2011

In this paper, we propose two algorithm for improving the performance of wireless localization(Trilateration and Least Square) based on the range based approach method in indoor environment using RSSI for ranging distance. we propose a method to discriminate the case that has relatively large estimation errors in trilateration using Heron''s formula for the volume of a tetrahedron. And we propose the algorithm to process the discriminated types of distance using the absolute value calculated by Heron''s formula. In addition, we propose another algorithm for the case of which the number of anchor nodes larger than three. In this case, Residual Weighting Factor(RWGH) improves the performance of Least Square. However, RWGH requires many number of calculations. In this paper, we propose Iterative Weighted Centroid Algorithm(IWCA) that has better performance and less calculation than RWGH. We show the improvement of performance for two algorithms and the combination of these algorithm by using simulation results.

• Journal of Korea Trade
• /
• v.26 no.7
• /
• pp.1-18
• /
• 2022

Purpose - Recent international studies have largely focused on measuring the welfare gains from increased trade varieties. To adequately capture the variety gains, it is of importance to estimate the elasticity of substitution between varieties of trade goods because it is one of the key parameters to determine the magnitude of the variety gains. Using the import data of South Korea, this paper shows that the elasticities vary substantially across the estimators, which affects the magnitude of the gains from trade. Design/methodology - Empirical studies working on the gains from trade variety have heavily depended on the estimation methods for the elasticity of substitution between trade varieties, developed by Feenstra (1994) and refined by Broda and Weinstein (2006). We estimate and compare the estimated elasticities for 8,945 HS 10 goods of South Korea, obtained from the three estimation methods: Feenstra's weighted least square (F-WLS), Feenstra's feasible generalized least square (F-FGLS), and Broda and Weinstein's feasible generalized least square (BW-FGLS). Findings - Using the estimated elasticities from the F-FGLS, considered as a suitable estimator, A typical Korean consumer saved 228 dollars per year by the greater access to new import varieties. This leads to gains from imported variety of 2.06% of GDP. In 2017, a typical Korean consumer would gain by 611 dollars, compared with 2000. China is the country with the largest contribution (28.4%), followed by Japan and USA. About 50% of all the welfare gains come from the imports from the three main trade partners. The Southern Asian countries are more important to the South Korean welfare gain than the Western European countries. Originality/value - Existing studies have chosen one of the methods without any criterion for the choice and then estimated the elasticities of substitution between varieties of trade goods. This paper focuses on the estimation specifications and methods as the cause of the disparity in estimated elasticities and welfare gains from trade variety. According to the Ramsey RESET and White tests, the F-FGLS estimates are relatively better compared to the F-WLS and BW-FGLS estimates. As another contribution, this paper provides the first measure of the welfare gains from trade variety for South Korea, using the estimated elasticities of substitution between trade varieties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.677-687
• /
• 2006

Kriging interpolation is one of the generally used interpolation techniques in Geostatistics field. This technique includes the experimental and theoretical variograms and the formulation of kriging interpolation. In contrast to the conventional least square method for stress recovery, kriging interpolation is based on the weighted least square method to obtain the estimated exact solution from the stress data at the Gauss points. The weight factor is determined by variogram modeling for interpolation of stress data apart from the conventional interpolation methods that use an equal weight factor. In addition to this, the p-level is increased non-uniformly or selectively through a posteriori error estimation based on SPR (superconvergent patch recovery) technique, proposed by Zienkiewicz and Zhu, by auto mesh p-refinement. The cut-out plate problem under tension has been tested to validate this approach. It also provides validity of kriging interpolation through comparing to existing least square method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1030-1041
• /
• 1997

The control model in the tandem cold rolling mill consists of many mathematical theories and is used to calculate the reference values such as the roll gap and the rolling speed for good operation of rolling mill. But, the control model used presently has a problem causing inaccurate prediction of the rolling force. By the parameter identification, it was found that the main factor causing inaccurate prediction of the rolling force was incorrect modeling of the friction coefficient and the flow stress. To get rid of the erroneous factor new adaptive schemes are suggested in this work. Those are a long-time adaptation by the iterative least-square method and a short-time adaptation by the recursive weighted least-square method respectively. The new equations for the friction coefficient and the flow stress are derived by applying the suggested adaptive algorithms. Through the on-line test in an actual mill, it is proved that the rolling force predicted by the new equations is more accurate than the one by the existing equations ever used.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.5
• /
• pp.725-731
• /
• 2013

In This paper, through simulation, proposes a system which makes it possible for freely moving multiple agents with ultrasonic receivers to estimate their own position by themselves using the ultrasonic signals sequentially emitted from multiple ultrasonic transmitters. This system possesses an advantage that there is no limit in the number of agents existing in the space covered by more than three transmitters fixed at proper locations. Hence, the proposed system can be utilized effectively in position tracking control of multiple robotic agents system and motion capturing system.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.4
• /
• pp.27-35
• /
• 2019

The paper examines the level of disclosure on Islamic banks' performance in the United Arab Emirates (UAE). The data was collected through content analysis of annual reports and financial statements of all fully-fledged Islamic banks working in the UAE over the period 2009 to 2013. Return on Assets is used as a proxy for the performance of Islamic banks while disclosure index is used as a proxy for Islamic banks' disclosure. Also, predetermined variables are used in the study like Size, Deposits, Non-Performing Investments and Capital to Risk Weighted Assets Ratio. Two-Stage Least-Square regression method is used to check the interdependence relationships between disclosure and performance of Islamic banks in the UAE. The results show a significant relationship between performance and disclosure in the UAE Islamic banks. Our regression results show that Islamic banks with higher levels of disclosure lead to higher operating performance. Furthermore, the performance has a great impact on the level of disclosure which means Islamic banks with high performance measures will disclose more information for investors and other institutions in order to reduce the cost of equity and increase their values in the market. This study is considered as a battery for further studies in the relationship between disclosure and financial performance of Islamic banks at a global level.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.75-82
• /
• 1985

The fuel pump system is developed with the Model Reference Adaptive Control (M.R.A.C.) algorithm based on the Weight Least Square (W.L.S.) algorithm for the parameter Identification and the one step ahead dead-beat control with the reference model. The value of some parameters as the sampling period 7, the weighting coefficient L, and the State Variable Filter (5.V,F.) coefficient f which a(fects the system performance are selected through computer simulation. For the variation of the plante dynamics rspecially due to the change of the fuel viscosity with the ambient temperature condition, the adaptability of the control system is studied in the case of regulation and tracking.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.118-123
• /
• 2008

This paper proposes a frequency transfer function synthesis for approximating a high-order model with resonance to a low-order model in the frequency domain. The presented model approximation method is based on minimizing the error function weighted by the numerator polynomial of approximated models, which is used of the RLS(Recursive Least Square) technique to estimate the coefficient vector of approximated models. The proposed method provides better fitting in a low frequency and peak resonance. And an example is given to illustrate feasibilities of the suggested schemes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.250-260
• /
• 1992

Two methods for computing extreme sea levels, which are the extreme probability method and the joint probability method, are examined at five different ports (Incheon, Cheju, Yeosu, Pusan, Mukho). The extreme probability mothod estimates the extreme sea levels from three different probability papers of Gumbel, Weibull and generalized extreme value(GEV) using the least square method, conventional moment method and probability weighted moment method. respectively. The results showed that the extreme sea levels estimated by the Gumbel paper or the least square method appeared higher than those calculated by other papers or methods. The extreme values estimated by the extreme probability method are approximately 5-10 cm lower than the values by the joint probability method.