• KSBB Journal
• /
• 제13권1호
• /
• pp.114-118
• /
• 1998

실크의 피브로인 단백짐의 가수분해에 의한 실크 펠타이드의 제조를 위하여 설크의 가용화 조건이 분자량 분포에 미치는 영 향을 고찰하였다 염 화칼숨, ethylenediamine 및 황산에 의해 가용화된 실크의 평균 분자량은 각각 41600, 3308과 1268 dalton 으로서 염화칼숨을 제외한 나머지 두 가용화 방법에서 평균 분 자량이 수천 dalton인 실크 용액을 얻을 수 있었으며 분산계수 는 3-4의 범위뜰 보였다. 가용화 및 분말화한 후 6시간 동안 단백질 분해효소 처리에 의하여 600-1200 dalton의 중량평균 분 자량을 갖는 살크 접타이드틀 얻을 수 있었다. 24시간 염산에 의한 산분해 처리에 의해 얻은 실크 웹타이드의 평균 분자량은 145 dalton으로 80%의 높은 유리 아미노산 함량을 나타내었다. 여러가지 가용화 방법 및 가수분해 방법 중 낮은 농도의 황산용 액으로 우선 실크를 가용화한 후 중화 및 효소처리에 의해 웹타 이드로 가수분해하는 방법이 과도한 아미노산의 유리를 억제하 면서 분자량의 조절도 용이할 것으로 판단되었다.

• Elastomers and Composites
• /
• 제33권2호
• /
• pp.110-116
• /
• 1998

A new technology was introduced to the emulsion polymerization. It is the ultrasonic activation method which replaced a chemical initiator and the environmentally benign process. In this study, free radicals were produced by a pulse type ultrasound energy irradiation, then polystyrene latex was polymerized without chemical initiator. With ultrasonic energy density, the degree of polymerization, average molecular weight, and particle size were increased, but the polydispersity index for the molecular weight and the particle size were decreased. The optimum condition of emulsifier concentration and temperature was found to be 1.0 wt.% SDS and $40^{\circ}C$, respectively. As a result, the emulsion polymerization process without chemical initiator was proved to be comparable to common latex properties such as average molecular weight, molecular weight distribution, particle size, etc.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.812-817
• /
• 2019

A zinc-air battery is one of most promising advanced batteries due to its high specific energy density, low cost, and environmental friendliness. However, zinc anodes in zinc-air batteries lead to several issues including self-discharge, corrosion reaction, and hydrogen evolution reaction (HER). In this paper, viscosity of electrolyte has been controlled to suppress the corrosion reaction, HER, and self-discharge behavior. Various viscosity average molecular weights of poly(acrylic acid) (PAA) are adopted to prepare the electrolyte. The evaporation of electrolytes is proportional to the increase in molecular weight. In addition, enhanced self-discharge behavior is obtained when the gelling agent with high molecular weight is used. In addition, the zinc-air cell assembled with lower viscosity average molecular weight of PAA (M_v ~ 450,000) delivers 510.85 mAh/g and 489.30 mAh/g of discharge capacity without storage and with 6 hr storage, respectively. Also, highest capacity retention (95.78 %) is obtained among studied materials.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.108-114
• /
• 2002

Poly(butylene succinate) (PBS) prepolymers were prepared by the condensation polymerization of 1,4-butanediol (1,4-BD) and succinic atid (SCA) in the presence of titanium (VI) isoproxide(TPI) catalyst. The PBS prepolymers reacted with 1,4-BD or SCA to obtain hydroxyl or carboxylic acid group terminated PBS. High molecular weight linear or branched PBS was synthesized by a coupling reaction between hydroxyl and carboxylic acid group terminated PBS, or by a branching reaction between carboxylic acid group terminated PBS and glycerol as a branching agent. The weight average molecular weight of the prepared linear or branched PBS was in the range of 100,000-220,000. Both melting point and thermal stability of the high molecular weight linear and branched PBSs were somewhat higher than those of general PBS. From a tensile behavior by Instron test, modulus, tensile strength and elongation at break improved with increase in the molecular weight of the prepared PBS through the coupling or the branching reaction. In particular, the high molecular weight linear PBS had about 2.5 times higher value in modulus than the branched one.

• 분석과학
• /
• 제8권4호
• /
• pp.465-468
• /
• 1995

Matrix assisted laser desorption ionization in mass spectrometry is a fast and accurate method to determine the molecular weight of natural and synthetic polymers. Unknown peptides such as elastase inhibitor and $\small{D}$-hydantoinase were analyzed using sinapinic acid as matrix and their molecular weights were compared with the results from protein sequencer and gel filtration chomatography, respectively. Synthetic polymers such as polyethyleneglycol, polypropyleneglycol, polydimethylsiloxane, and polystyrene were analyzed using matrices such as 2,5-dihydroxybenzoic acid, 4-hdroxyazobenzenecarboxylic acid, and 2-nitrophenyl octyl ether. Average molecular weights of polystyrene were compared with molecular weights by gel permeation chromatography.

• Journal of Microbiology and Biotechnology
• /
• 제33권5호
• /
• pp.656-661
• /
• 2023

The aims of this study were to optimize the preparation of low-molecular-weight collagen using a proteolytic enzyme (alcalase) derived from the feet of Korean native chickens, and to characterize the process of collagen hydrolysis. Foreign bodies from chicken feet were removed using ultrasonication at 28 kHz with 1.36 kW for more than 25 min. The hydrolytic pattern and molecular weight distribution of enzyme-treated collagen from chicken feet were analyzed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and high-performance liquid chromatography, respectively. Ideally, chicken feet should be treated at 100℃ for 8 h to obtain a high collagen content using hot water extraction. The collagen content of the chicken foot extract was 13.9 g/100 g, and the proportion of low-molecular-weight collagen increased with increasing proteolytic enzyme concentration and reaction time. When treated with 1% alcalase, the average molecular weight of collagen decreased rapidly to 4,929 Da within 5 h and thereafter decreased at a slower rate, reaching 4,916 Da after 7 h. Size exclusion chromatography revealed that low-molecular-weight collagen peptides of approximately 1,000-5,000 Da were obtained after hydrolysis with 1% alcalase for 1 h.

• Elastomers and Composites
• /
• 제31권3호
• /
• pp.175-182
• /
• 1996

Polymer latices, prepared from the emulsion polymerization of vinyl monomer compounds, are widely used for many industrial applications. Included among these are uses in paints, adhesives, flocculants, and heavy-duty plastics as well as their original use in synthetic rubber compounds. The emulsion polymerization process with chemical initiator has chemical disadvantage such as removal of initiator which was left after polymerization. In this study, polystyrene latex was prepared by using ultrasonic irradiation which generate the free radical, and then it was analyzed by GPC. Reaction temperature hardly have an effect on average molecular weight. Average molecular weight is increased by increasing amount of surfactant, i.e. SDS, but polydispersity is decreased. After 90 minutes of reaction time, increase and decrease of average molecular weight Is repeated. It is proposed that monodisperse polymer is obtained by controlling ultrasonic irradiation time and surfactant concentration.

• Journal of Microbiology
• /
• 제34권3호
• /
• pp.279-283
• /
• 1996

The weight average molecular weight of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) synthesized by Alcaligenes sp. SH-69 was altered between $3.2$\times$10^5$ and $1.1$\times$10^6$ depending upon various culture conditions. It appeared that culture conditions favorable for the efficient production of copolyesters promoted the formation of higher molecular weight copolyesters. Polydispersity indices of isolated copolyesters were in the range of 1.5 to 2.5.

• Fibers and Polymers
• /
• 제1권1호
• /
• pp.1-5
• /
• 2000

Poly(3-methyltetrahydrofuran)(3-MTHF) and poly(tetrahydrofuran-co-3-MTHF), having very narrow molecular weight distribution were successfully synthesized via photo-induced living cationic polymerization in the presence of diphenyliodonium hexafluorophosphate. Linear relationship between % conversion and number average molecular weight of resulting poly(3-MTHF) in the polymerization of 3-MTHF, carried out at -22$^{\circ}C$, indicates that the 5-membered cyclic oxonium ion, being responsible for the cationic propagation is stabilized by ion pall formation with hexafluorophosphate anion, supplied from the salt. The linear relationship between two parameters, mentioned above was also observed in the copolymerization of 3-MTHF with THF, carried out at 0 and -22$^{\circ}C$. The molecular structures including the copolymer composition and average molecular weight and its distribution is determined by reaction parameters such as monomer feed ratio and reaction temperature.

• KSBB Journal
• /
• 제13권1호
• /
• pp.96-100
• /
• 1998

두 개의 프로모터 (trc와 Pp)를 Alcaligenes eutrophus에서 유래된 PHA 오페론에 삽입하여 재조합 대장균에서 분자량이 큰 polyhydroxybutyrate (PHB)를 얻고자 하였다. 두 개의 프로모터는 hydroxybutyric CoA와 PHA 중합반응의 유전자 발현을 각각 독립적으로 제어하기 위해 설계된 것이다 새로운 합성오페론을 포함한 플라즈미드는 E. coli DH5 $\alpha$ 에 transformation 되어 PHB 생산에 이용되었다. 본 실험의 가설로서 PHA 합성오페론의 IPTG에 의한 유도가 없을 경우 낮은 pHA synthase의 활성이 고분자 중합반응의 개시제 농도를 줄여주어 결과적으로 높은 연결수의 고분자를 생성할 것이라는 모델을 세웠다. 실제로 IPTG의 공급이 없는 발효실험을 통해 평균분자량이 $2.5{\times}10^7$ 인 거대 고분자를 얻을 수 있었다. PHA 생합성에 관여는 효소의 활성 분석으로 3-hydroxybutyric CoA의 중합을 촉매하는 효소인 PHA synthase의 활성을 가지고 In vivo에서 분자량이 제어됨을 확인하였다.