• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.5
• /
• pp.31-37
• /
• 2017

In this Paper, we have Improved the Manufacturing Process of Liquid Aluminum Sulfate using the Design of Automated Measurement Systems. The Manufacturing Process of Liquid Aluminum Sulfate uses a Large Weight. The Quality of a Product Depends Highly on the Proportion of the Raw Material Input in the Production Process. Therefore, it is Very Important to Accurately Measure the Amount of Raw Material. For Automation Design, Load Cell Sensor which can Measure Large Weight Accurately and PLC Technology which is most used in Automation Process are Applied. The Content of Aluminum Oxide in the Aluminum Sulfate Produced before the Automation Design Varies from 8.023% to 8.250%. However, after Automation Design, the Amount of Change from 8.09% to 8.19% was Greatly Reduced. As a Result, we could Reduce the Quality Defect rate Due to Weighing Errors and Reduce Safety Accidents by Applying Automation System.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.4
• /
• pp.296-301
• /
• 2016

Using high magnetic flux from a 60 Hz high-current cable, a 2 W wireless-powered energy harvesting receiver for sensor operation, internet of things (IoT) devices, and LED lights inside electrical cable tunnels is proposed. The proposed receiver comprises a copper coil with a high number of turns, a ring-shaped ferromagnetic core, a capacitor for compensating for the impedance of the coil in series, and a rectifier with various types of loads, such as sensors, IoT devices, and LEDs. To achieve safe and easy installation around the power cable, the proposed ring-shaped receiver is designed to easily open or close using a clothespin-shaped handle, which is made of highly-insulated plastic. Laminated silicon steel plates are assembled and used as the core because of their mechanical robustness and high saturation flux density characteristic, in which the thickness of each isolated plate is 0.3 mm. The series-connected resonant capacitor, which is appropriate for low-voltage applications, is used together with the proposed receiver coil. The concept of the figure of merit, which is the product weight and cost of both the silicon steel plate and the copper wire, is used for an optimized design; therefore, the weight of the fabricated receiver and the price of raw material is 750 gf and USD $2 each, respectively. The 2.2 W powering capability of the fabricated receiver was experimentally verified with a power cable current of $100A_{rms}$ at 60Hz.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.2
• /
• pp.223-230
• /
• 2012

Purpose : The purpose of this study was to analyze weight bearing of cane and affected foot at different speeds during walking. Methods : Thirteen subjects (6 males, 7 females) with stroke enrolled in the study. A foot sensor and an instrumented cane were integrated to analyze the vertical peak force on the affected foot and the cane. Results : The applied vertical peak force on the cane were $12.02{\pm}4.80%$ (slow speed), $7.97{\pm}3.95%$ (comfortable speed), and $6.86{\pm}3.30%$ (fast speed) body weight, respectively. The results indicated significantly lower vertical peak force on the affected foot in the low speed walking condition when compared to the fast walking (p<.05) and the comfortable walking (p<.05) conditions. The correlations between TUG and vertical peak force on the cane and affected foot were .71, and -.70 (p<.01). There was a higher correlation between the vertical peak force on the cane and affected foot were -.87(p<.01). Conclusion : In conclusion, slower walking speed applied greater vertical peak force on the cane. On the contray, slower walking speed applied less vertical peak force on the affected foot. Further studies, duration of force should be measured at different speeds during walking in lower and higher functioning hemiparetic subjects, as its use may mask underlying gait impairment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.402-409
• /
• 2018

In this paper, we propose a lunar landing scenario of a robotic lunar landing mission and implements an optimal landing trajectory at the powered descent phase based on the proposed scenario. The change of attitude of the lunar lander in the power descent phase affects not only the amount of fuel used but also sensor operation of image based navigation. Therefore, the attitude angular velocity is included in the cost function of the optimal control problem to minimize the unnecessary attitude change when the optimal landing trajectory generates at powered descent phase of the lunar landing. The influence of the change of attitude angular velocity on the optimal landing trajectory are analyzed by adjusting the weight of the attitude angular velocity. Based on the results, we suggest the proper weight to generate the optimal landing trajectory in order to minimize the influence of the attitude angular velocity.

• Journal of Sensor Science and Technology
• /
• v.3 no.3
• /
• pp.28-35
• /
• 1994

Caustic Soda Treatment Systems need a concentration measurement device in order to monitor the weight reduction amount of polyester fabrics. Since the reduction process requires several concentration measurements, we have to do the unit titration fast and exactly. Therefore, a proposition of estimation algorithm for finding the equivalent point in the titration process is needed. In this paper, we used the cardinal spline algorithm, to estimate the proper curve with the measured pH-values after each injection of titration sdution, to predict the equivalent point. While the processing time is elapsed, several equivalent points are estimated and drawed the line graph of fabrics weight reduction automatically. Finally, we designed the hardware and the software of an automatic titration system that can generate the reduction ending signal of Caustic Soda Treatment System.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.599-607
• /
• 2011

In this paper, a reaction-force compensation system for an XY linear motion stage, without an additional external isolation structure or extra motors, is developed. This system consists of a movable magnet track, a spring, a dummy weight, and a dedicated sensor module that measures the relative positions of the movable magnet track with respect to the motor coil. The reaction force compensation system is modeled, and simulations are carried out to optimize design parameters such as the moving distance of the magnet track, the transmission force, the dummy weight, and the allowed size of the mechanism. An XY linear motion stage is built, incorporating the reaction force compensation system, and the performance of the system is verified experimentally. For acceleration and deceleration values of 10 m/$s^2$, 85% of the reaction force is absorbed by the reaction force compensation system.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.340-345
• /
• 2014

Since the moisture content (MC) of growing medium closely related with the crop transpiration, the MC should be included to the environmental factors to be considered for irrigation control in soilless culture. The objective of this study was to analyze the transpiration of paprika plants using daily mean solar radiation (RAD) and vapor pressure deficit (VPD) as well as the growth of the plants at different MCs of rockwool growing media. The starting points of irrigation were controlled by a moisture sensor with minimum set points of 40%, 50%, and 60% of MCs. The canopy transpirations were measured for 80 to 120 days after transplanting and analyzed. The transpirations were well regressed with a combination of both RAD and VPD rather than daily mean RAD only under the controlled MCs. The transpiration at 60% MC was higher than those at 50% and 40% MCs. Leaf area, leaf fresh and dry weights at 60% MC were higher than those at 50% and 40% MCs while the number of leaves had no significant difference among the MCs. There were no significant differences in number of fruits and fruit size among all the MCs, while fruit weight was significantly lower at 40% MC than other treatments. Fresh and dry fruit yields were the highest at 60% MC. Therefore it was concluded that the transpiration was affected by the MC of rockwool growing medium and the minimum set point of 50-60% MC of rockwool growing medium gave better effects on the growth of the paprika plants.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.25-35
• /
• 2006

The purpose of this study was to investigate the shock attenuation mechanisms while varying the loads in a backpack during drop landing. Ten subjects (age: $22.8{\pm}3.6$, height: $173.5{\pm}4.3$, weight: $70.4{\pm}5.2$) performed drop landing under five varying loads (0, 5kg. 10kg. 20kg. 30kg). By employing two cameras (Sony VX2100) the following kinematic variables (phase time, joint rotational angle and velocity of ankle, knee and hip) were calculated by applying 2D motion analysis. Additional data, i.e. max vertical ground force (VGRF) and acceleration, was acquired by using two AMTI Force plates and a Noraxon Inline Accelerometer Sensor. Through analysing the power spectrum density (PSD), drop landing patterns were classified into four groups and each group was discovered to have a different shock attenuation mechanism. The first pattern that appeared at landing was that the right leg absorbed most of the shock attenuation. The second pattern to appear was that subject quickly transferred the load from the right leg to the left leg as quickly as possible. Thus, this illustrated that two shock attenuation mechanisms occurred during drop landing under varying load conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.629-630
• /
• 2017

Recently, the number of patients with habitual vertebrae is increasing due to inappropriate postures and habits while sitting on a chair for a long time, because modern people have a great deal of work and studying due to a lot of work and study. Therefore, it is necessary to prevent such a disease through real-time monitoring and to present a guide for the user to recognize the importance of correct posture. In this study, we implemented a posture discrimination system which can help users to calibrate posture by judging the user's sitting position and feedback by using a pressure sensor based weight distribution system. We analyzed the distribution pattern of body weight to determine one normal posture and six abnormal postures. If the abnormal posture is maintained constantly, the implementation of the application that induces the right posture by ringing the notification is described.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.71-86
• /
• 2023

Rock blasting tests using underground penetration-type displacement sensors were conducted, and three-dimensional finite element numerical analyses were performed to assess their applicability and mitigate slope hazards during rock blasting. Additionally, parameters influencing vibration velocity were investigated during the tests. The results confirmed that underground penetration-type displacement sensors are suitable for monitoring rock slope behavior, and the numerical analyses revealed that the most influential parameter on vibration velocity during rock blasting is the unit weight. Furthermore, it was observed that vibration velocity decreases significantly with distance from the blast source, and proximity to the source leads to substantial variations in vibration velocity due to differences in elastic modulus and unit weight. Changes in internal friction angle and adhesive strength had minimal impact.