• 제목/요약/키워드: weight reduction

검색결과 3,483건 처리시간 0.031초

경량화에 대한 안전성을 고려한 로우컨트롤암의 다목적 최적설계 (Multi-objective Optimization of Lower Control Arm Considering the Stability for Weight Reduction)

  • 이동화;박영철;허선철
    • 한국자동차공학회논문집
    • /
    • 제11권4호
    • /
    • pp.94-101
    • /
    • 2003
  • Recently, miniaturization and weight reduction is getting more attention due to various benefits in automotive components design. It is a trend that the design of experiment(DOE) and statical design method are frequently used for optimization. In this research, the safety of lower control arm is evaluated according to its material change form S45C to A16061 for the reduction of arm's weight. The variance analysis on the basis of structure analysis and DOE is applied to the lower control m. We have proposed a statistical design model to evaluate the effect of structural modification by performing the practical multi-objective optimization considering mass, stress and deflection.

가스 재열기 로터 부위의 응력 해석 (Stress Analysis of Rotor Part in Gas-Gas Heater)

  • 이후광;황석환;최재승
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.639-642
    • /
    • 2001
  • The possibility of weight reduction of rotor part in gas-gas geater(GGH) is studied from the viewpoint of allowable stress. In this work, finite element analysis(FEA) is performed with original model and three weight-reduced models with different diaphragm thickness, respectively. Stress concentrations at rotor diaphragm happen due to the dead weight, pressure difference between treated gas and untreated gas and thermal distribution in the rotor. As the thickness of diaphragm is decreased, the stress level is increased. The direction of treated gas and untreated gas flow may affect the stress level. Fatigue life assessment is not considered because pressure difference, the only cyclic load, can be ignored. The possible weight-reduced model is presented.

  • PDF

폐스티로폼의 감용방식에 관한 연구 (A Study on the Various Volume Reducing Methods for Wasted EPS Foam)

  • 임중연;최호준;황병복
    • 한국자원리싸이클링학회:학술대회논문집
    • /
    • 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
    • /
    • pp.165-169
    • /
    • 2003
  • Current volume reduction methods for wasted expandable polystyrene (EPS) foam are summarized and compared each other. Wasted EPS foam has not been recycled effectively because of its large volume to weight ratio. This has prevented from its proper recycling because of high cost of transportation to recycling plant. Successful recycling of wasted EPS foam results directly from successful, i.e. economically and environmentally, volume reduction of wasted EPS foam. This paper deals with various methods for volume reduction methods of wasted EPS foam. Five typical methods of volume reduction are introduced and they are compared each other in terms of expected PS properties after volume reduction, cost effectiveness of each process, possible effects on environment caused by the volume reduction process, and possible recycled products. The methods include thermal, solvent, far infrared and mechanical compaction. Comparison in this paper is made mostly in qualitative manner. The focus in this study is concentrated on summarizing and comparing existing methods of volume reduction for wasted EPS foam.

  • PDF

Weight Reduction Effect of Angook Cereal Mixture on Female College Students

  • Suh, Hyung-Joo;Kim, Young-Soon;Jung, Eun-Young;Chang, Un-Jae;Oh, Sung-Hoon
    • Preventive Nutrition and Food Science
    • /
    • 제11권3호
    • /
    • pp.226-231
    • /
    • 2006
  • This study evaluated the weight reduction effect of Angook cereal mixture. The cereal mixture was prepared with barley, unpolished rice, corn, soybean, Garcinia cambogia, guar-gum, maltodextrin, glucomannan and a vitamin mixture. Eighteen female college students participated in this 8 weeks weight control program. All subjects were randomly assigned to the treatment and placebo groups. Mean energy intake of the treatment group was $1,356.4{\pm}79.9\;kcal$ (carbohydrate: 67.1%, protein: 18.7%, fat: 14.2%) and placebo group consumed $1,367.6{\pm}71.8\;kcal$ (carbohydrate: 64.2%, protein: 19.7%, fat: 16.1%) during program. The placebo group lost $3.9{\pm}0.8\;kg$ of body weight and the treatment group lost $5.9{\pm}0.7\;kg$ of body weight. There were significant differences in the decrease of total body weight, absolute fat mass, waist circumference (WC) and hip circumference (HC) between the two groups (p<0.05), however, the lean body mass was not significantly decreased in the treatment group compared to the placebo group. There were no differences in the changes in blood glucose, total-cholesterol, HDL-choloesterol, LDL-cholesterol and triglycerides between groups. These findings suggest that the intake of Angook cereal mixture may be beneficial for the reduction of the body weight, absolute fat mass, WC and HC.

운동에 따른 비만 여대생의 복부지방에 미치는 영향 (The Effects of Circuit Training on Abdominal Fat in Obesity Coed)

  • 송명수;노현정;김상수
    • PNF and Movement
    • /
    • 제8권1호
    • /
    • pp.21-29
    • /
    • 2010
  • Purpose : The purpose of this research is to examine the effects of circuit weight training and aerobic exercise on the bodily formation and abdominal fat area of obese female college students. Methods : The female college students whose BMI is over $25kg/m^2$ were divided into the circuit weight training group and the aerobic exercise group and circuit weight training and aerobic exercise were conducted on the respective group five times a week. Resultlts : 1. The tendency of statistically significant reduction in weight, body fat percentage, and BMI was shown in both the circuit weight training group and the aerobic exercise group but there were no significant differences between these groups. 2. The tendency of statistically significant reduction in total abdominal fat area, and subcutaneous fat area was shown in both the circuit weight training group and the aerobic exercise group but there were no significant differences between these groups. 3. Visceral fat area was reduced more in the aerobic exercise group than in the circuit weight training group Conclusion : It was confirmed that exercise alone in the state of no dietary treatment being given could cause obese people bodily formation.

  • PDF

Dynamic Energy Balance and Obesity Prevention

  • Yoo, Sunmi
    • Journal of Obesity & Metabolic Syndrome
    • /
    • 제27권4호
    • /
    • pp.203-212
    • /
    • 2018
  • Dynamic energy balance can give clinicians important answers for why obesity is so resistant to control. When food intake is reduced for weight control, all components of energy expenditure change, including metabolic rate at rest (resting energy expenditure [REE]), metabolic rate of exercise, and adaptive thermogenesis. This means that a change in energy intake influences energy expenditure in a dynamic way. Mechanisms associated with reduction of total energy expenditure following weight loss are likely to be related to decreased body mass and enhanced metabolic efficiency. Reducing calorie intake results in a decrease in body weight, initially with a marked reduction in fat free mass and a decrease in REE, and this change is maintained for several years in a reduced state. Metabolic adaptation, which is not explained by changes in body composition, lasts for more than several years. These are powerful physiological adaptations that induce weight regain. To avoid a typically observed weight-loss and regain trajectory, realistic weight loss goals should be established and maintained for more than 1 year. Using a mathematical model can help clinicians formulate advice about diet control. It is important to emphasize steady efforts for several years to maintain reduced weight over efforts to lose weight. Because obesity is difficult to reverse, clinicians must prioritize obesity prevention. Obesity prevention strategies should have high feasibility, broad population reach, and relatively low cost, especially for young children who have the smallest energy gaps to change.

MULTIFACTOR DIMENSIONALITY REDUCTION(MDR)을 이용한 한우 도체중에서의 주요 SNP 규명 (Main SNP Identification of Hanwoo Carcass Weight with Multifactor Dimensionality Reduction(MDR) Method)

  • 이제영;김동철
    • 응용통계연구
    • /
    • 제21권1호
    • /
    • pp.53-63
    • /
    • 2008
  • 일반적으로 인간의 질병과 가축의 경제적인 특성은 하나의 유전자가 아닌 여러 유전자의 상호작용으로 일어난다고 믿고 있다. 따라서 본 연구에서는 세대를 거듭할수록 대립유전자의 유전이 안정적으로 발생되어지고 개체의 기능적인 유전적 가치를 직접적으로 추정할 수 있는 single nucleotide polymorphism(SNP)을 한우의 경제적 특성인도체중(carcass cold weight)에 대하여 모수적인 방법인 ANOVA와 비모수적인 방법인 multifactor dimensionality reduction(MDR)을 이용하여 하나의 유전자의 효과와 두 개의 유전자의 상호작용 효과를 비교하였다. ANOVA에서는 하나의 유전자 SNP1이 도체중에 유의한 효과가 있었고 상호작용 효과에서는 도체중에 유의한 효과는 없었다. MDR에서는 하나의 유전자의 효과인 SNP1과 두 개의 유전자의 상호작용인 SNP1*SNP2의 효과가 컸으며 SNP1과 SNP1*SNP2를 비교했을 시에는 SNP1*SNP2의 효과가 더 크게 나타났다. 이는 개별 SNP유전자 보다 복합 SNP유전자의 상호작용이 경제적인 특성인 도체증에 더 영향을 준다는 것을 알 수 있었다.

Salicylic Acid Counteracts Aluminum Stress-induced Growth and Biomass Yield Reduction in Medicago sativa L.

  • Rahman, Md. Atikur;Lee, Sang-Hoon;Song, Yowook;Ji, Hee Jung;Kim, Ki-Yong;Choi, Gi Jun;Lee, Ki-Won
    • 한국초지조사료학회지
    • /
    • 제39권3호
    • /
    • pp.153-157
    • /
    • 2019
  • Salicylic acid (SA) is an essential plant growth regulator that functions as a signaling molecule in plants. The purpose of this study was to clarify how the exogenous application of SA counteracts aluminum stress-induced growth and biomass yield reduction in alfalfa exposed to aluminum (Al) stress. Two-week-old alfalfa seedlings were exposed to a combination of $AlCl_3$ ($0{\mu}M$, $50{\mu}M$ and $100{\mu}M$, respectively) and SA (0.1 mM) for 72 hours. We observed, Al stress-induced plant growth inhibition and forage yield reduction are Al stress-dependent manner. A significant reduction of plant height (42.0-52.9%), leaf relative water content (13.0-21.4%), root length (35.4-48.7%), shoot fresh weight (31.2-25.9%), root fresh weight (15.4-23.3%), shoot dry weight (12.7-22.2%), roots dry weight (47.3-53.5%), were observed in alfalfa. In contrast, SA alleviated the Al-stress and enhanced growth and biomass yield in alfalfa. This study provides useful information concerning the role of SA that counteracts aluminum stress-induced growth and yield reduction in alfalfa.

Hypoglycemic activity of diospyros peregrina fruits in diabetic rats

  • Dewanjee, Saikat;Maiti, Anup;Kundu, Mintu;Mandal, Subhash C
    • Advances in Traditional Medicine
    • /
    • 제8권3호
    • /
    • pp.279-285
    • /
    • 2008
  • Diospyros peregrina Gurke. (Ebenaceae) is a small middle sized tree grows luxuriantly in the plains of costal West Bengal, India. The objective of the study was to explore the antidiabetic activity of methanol extract of matured fruits of Diospyros peregrina to substantiate the folklore claim of traditional practitioners. It was also aimed to establish correlation with reduction of oxidative state associated with diabetes. Methanol extract of matured fruits of Diospyros peregrina was administered orally at doses of 150 and 300 mg/kg body weight for 12 consecutive days to normal and streptozotocin induced diabetic rats. Fasting blood glucose level was estimated in both normal and diabetic rats while serum lipid profiles, liver glycogen level and pancreatic thiobarbituric acid reactive substances (TBARS) were evaluated for diabetic rats. Initial and final changes in body weight were also recorded. Oral glucose tolerance test was performed during the course of study. Experimental findings showed significant antidiabetic potential of extract in term of reduction of fasting blood glucose level of both normal and diabetic rats. It was found that extract at the dose of 300 mg/kg body weight is more effective and percentage reduction (55.64) of elevated blood glucose level is comparable to that of standard drug glibenclamide (60.60) at a dose of 10 mg/kg body weight. Observed data found statistically significant in reduction of serum lipid and pancreatic TBARS levels whilst improvement was observed in liver glycogen level and body weight profiles in extract treated diabetic rats.

The role of internal architecture in producing high-strength 3D printed cobalt-chromium objects

  • Abdullah Jasim Mohammed;Ahmed Asim Al-Ali
    • The Journal of Advanced Prosthodontics
    • /
    • 제16권2호
    • /
    • pp.91-104
    • /
    • 2024
  • PURPOSE. The objectives of the current study were to estimate the influence of self-reinforced hollow structures with a graded density on the dimensional accuracy, weight, and mechanical properties of Co-Cr objects printed with the direct metal laser sintering (DMLS) technique. MATERIALS AND METHODS. Sixty-five dog-bone samples were manufactured to evaluate the dimensional accuracy of printing, weight, and tensile properties of DMLS printed Co-Cr. They were divided into Group 1 (control) (n = 5), Group 2, 3, and 4 with incorporated hollow structures based on (spherical, elliptical, and diamond) shapes; they were subdivided into subgroups (n = 5) according to the volumetric reduction (10%, 15%, 20% and 25%). Radiographic imaging and microscopic analysis of the fractographs were conducted to validate the created geometries; the dimensional accuracy, weight, yield tensile strength, and modulus of elasticity were calculated. The data were estimated by one-way ANOVA and Duncan's tests at P < .05. RESULTS. The accuracy test showed an insignificant difference in the x, y, z directions in all printed groups. The weight was significantly reduced proportionally to the reduced volume fraction. The yield strength and elastic modulus of the control group and Group 2 at 10% volume reduction were comparable and significantly higher than the other subgroups. CONCLUSION. The printing accuracy was not affected by the presence or type of the hollow geometry. The weight of Group 2 at 10% reduction was significantly lower than that of the control group. The yield strength and elastic modulus of the Group 2 at a 10% reduction showed means equivalent to the compact objects and were significantly higher than other subgroups.