To compare the growth pattern of ginseng plant under between conventional shading(light transmittance rate 3%) and polyethylene net shading(light transmittance rate 10%), the distribution of leaf area, specific leaf weight (S. L. W), leaf and stem dry weight and changes in light intensity were investigated in 2, 4 and 6 year old ginseng plant populations. Light transmittance rate(L.T.R.) was 3% at front line, 2% at middle line and 1.5% at rear line under conventional shading but it was 12, 10 and 8% under polyethylene net(P.E) shading, respectively. In 2 year old population, there was a little difference in the growth characteristics investigated between conventional and P.E. shading. In 4 year old field, the leaf area, stem and leaf dry weight decreased in large amount in the order of middle, and rear line on ridge under conventional shading, but with a little difference under P.E. shading. And these trends enlarged in 6 year old field with appearance of a large part of shoot over furrow from ridge planted ginseng. Root yield index was much lowered at the rear 3rd, 4th and 5th line of the conventional shading bed, but there was no yield difference among lines except 5th lines under the P.E. shading with higher yield by 28% than conventional shading.
Seong, Eun Soo;Seo, Eun Won;Chung, Ill Min;Kim, Myong Jo;Kim, Hee Young;Yoo, Ji Hye;Choi, Jae Hoo;Kim, Nam Jun;Yu, Chang Yeon
Korean Journal of Medicinal Crop Science
/
v.23
no.2
/
pp.132-137
/
2015
This study was conducted to find out the variation in agronomic trait and chemical composition in the collected Perilla frutescens from China and Japan. From the results of growth investigation, the maximum number if branches was 26.7ea in Japan 134 line, followed by 25 nodes number in China 119 line. Among the different lines investigated, maximum number of panicle number (108.8) were observed in China 114 line. 1000 seed weight was maximum (4.12 g) in China 118 line. Flowering time of different collected lines varied significantly with average value of 175.5 days and the average line required for maturation of seedlings was 205.1 days. Plant height was the highest (248.9 cm) in China 107 line. Highest number of total picking leaves was 965ea, and the average picked period was 54 days. The major phenol compounds contained in Perilla frutescens showed wide variation for Syringic acid, Benzoic acid, Naringin, o-Coumaric acid, Myricetin, Naringenin and Hesperetin. Japan 139 line showed the highest level of total phenol contents ($8254.0{\mu}g/g$, dry weight).
Proceedings of the Korean Society of Precision Engineering Conference
/
2002.10a
/
pp.26-31
/
2002
The recent machine tools are requested so high-quality processing and productivity increasing. Therefore, it is so necessary to develop technology fur high-speed and high-precision. This thesis touches on the development of high speed and intellectual line center. At first, the line center is necessary that strong structure, compact structure and light weight design for high-speed processing and transfer. So, it is necessary that examination of new materials and structures for light-weight and control devices for precision processing. So. it is going to make mention of the process of 1st model production for the above-mentioned based on test model production and evaluation.
International Journal of Industrial Entomology and Biomaterials
/
v.8
no.1
/
pp.107-112
/
2004
The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.
From a series of studies conducted on the local maize lines at the Agr. College of the Chungnam National Univ., a few maize lines with many tillers and ears per plant were identified and tentatively named as MET. The purpose of the study was to evaluate the MET lines, which were selfed for five generations, for silage purpose under the different plant densities. A hybrid, Suwon #19 and a synthetic variety, Puyo #3${\times}$#2, were included for comparison. Plant height at harvesting times showed no significant varietal differences. However, the MET lines were very slow in early plant growth compared to the hybrid or synthetic variety, probably due to inbreeding depression of the MET lines. Total fresh weight at the harvesting times was highest in the MET 1 line. The MET 1 line was about 2,000 kgr. per 10a. higher than the hybrid at the harvesting time. The highest fresh weight was obtained when grown under the plant density of 60 ${\times}$ 20cm. Total dry weight per unit area showed the same tendency as the fresh weight. Total dry weight of MET 1 line was about 2.4 tons per 10a., which was about 10% higher than the hybrid, Suwon #19. As the fresh weight, the total dry weight was also highest in the plant density of 60 ${\times}$ 20cm. The grain yield per 10 are of MET 1 was comparable to the grain yield of the hybrid, especially in the low plant density, 60 ${\times}$ 40cm. The average number of effective tillers of MET lines were 4.5, while the mean tiller number of the hybrid or synthetic variety were none. However, the lodging was one of the problem for growing MET lines. The 100 kernel weight of MET lines was about 9 gr., while the 100 kernel weight of the hybrid or synthetic variety was about 30 grm.
In a line X tester crossing programme (24 lines 2 testers) the general combining ability (GCA) and specific combining ability (SCA) effects were analyzed for five economic characters in the bivoltine silkworm, Bombyx mori L. The results showed desired GCA effects in 934D1 (9500), 934B (9789) and 934A1 (9855) for cocoon yield per 10,000 larvae brushed by number. Likewise, the lines found to be superior based on GCA effects for other characters were as follows; 931D (14.040 Kgs), 935E (17.023 Kga.), 934D1 (15.643 Kgs.) and 934B (15.687 Kgs.) for cocoon yield by weight: 931D (1.717 g) and 930E (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight: 931D (1.717 g) and 930e (1.796 g) for single cocoon weight; 932B (0.330 g) for single shell weight; 932B (18.7%), 933A (18.86%) and 935A (19.89%) for shell ratio. SCA effects showed the superiority of 932D$\times$KA (9822 cocoon yield per 10,000 larvae brushed by number); 932A$\times$NB4D2 (16.933 Kgs. cocoon yield per 10,000 larvae brushed by weight); 931C$\times$KA (1.911 g single cocoon weight); 934$\times$NB4D2 (0.371 g single shell weight and 21.0% shell ratio). The analysis indicated non-additive gene action for all the five characters.
This research focused on pattern adjustments of the stable knit garment for women. Fourteen different types of the knitted fabrics by 12 gauge, computerized flat bed machines were cut in as one half of the torso front, one half of the torso back, and one side of the sleeves for each of them. Guidelines such as the center front, the center back, the armhole, the bust-line, the waistline, the hip-line the hemline were basted on the torso patterns in the knitted fabrics. Also the grain-line, the elbow-line, and the hemline were basted on the one side of the sleeves in the same as above knitted fabrics. The torso patterns in the knitted fabrics were exhibited on the dress-forms on top of the torso patterns in Muslin, which also have the same guidelines drawn on. The distances between the guidelines on Muslin and those on the knitted fabrics for each set of the sample fabrics were measured every three days for two weeks. The fabric properties of the fourteen knitted fabrics such as fiber contents, stitch density both in the wale and course directions, weight, thickness, stretch & recovery, residual shrinkage, relaxation and drapability were laboratory tested for how these were related to finished appearance of 12 gauge, computerized flat knit garments and also in order to prove the fourteen knitted fabrics fall to a category of such as the stable knit. The results from the investigation revealed that six fabric properties such as stitch density, thickness, stretch recovery, residual shrinkage and relaxation were not so much significant factors as weight and drapability. In conclusion, fabric weight, and drapability of the fabric resulting from fiber contents were the cause of final appearance distortion of garment. When adapting patterns for stabilized, 12 gauge, computerized flat knitted fabrics, the fiber contents of the fabrics should be taken into consideration to reduce the production cost and produce better-fit garments.
Inal, Ali;Kaplan, M. Ali;Kucukoner, Mehmet;Urakci, Zuhat;Guven, Mehmet;Nas, Necip;Yunce, Muharrem;Isikdogan, Abdurrahman
Asian Pacific Journal of Cancer Prevention
/
v.13
no.8
/
pp.3869-3872
/
2012
Background: The majority of patients with gastric cancer in developing countries present with advanced disease. Systemic chemotherapy therefore has limited impact on overall survival. Patients eligible for chemotherapy should be selected carefully. The aim of this study was to analyze prognostic factors for survival in advanced gastric cancer patients undergoing first-line palliative chemotherapy. Methods: We retrospectively reviewed 107 locally advanced or metastatic gastric cancer patients who were treated with docetaxel and cisplatin plus fluorouracil (DCF) as first-line treatment between June 2007 and August 2011. Twenty-eight potential prognostic variables were chosen for univariate and multivariate analyses. Results: Among the 28 variables of univariate analysis, nine variables were identified to have prognostic significance: performance status, histology, location of primary tumor, lung metastasis, peritoneum metastasis, ascites, hemoglobin, albumin, weight loss and bone metastasis. Multivariate analysis by Cox proportional hazard model, including nine prognostic significance factors evident in univariate analysis, revealed weight loss, histology, peritoneum metastasis, ascites and serum hemoglobin level to be independent variables. Conclusion: Performance status, weight loss, histology, peritoneum metastasis, ascites and serum hemoglobin level were identified as important prognostic factors in advanced gastric cancer patients. These findings may facilitate pretreatment prediction of survival and can be used for selecting patients for treatment.
A lot of individual ginseng plants were selected in the farmer's fields to develop new ginseng varieties with desirable traits. Among them, a promising line has been developed through comparative cultivation of several lines selected with pure line separation of local raced. It was then designated as "KC (denotes Korean Ginseng)" and tested in the regional yield and adaptation trials for 10 years. KG lines grew vigorously after 4 years of age. Especially, KG 102 line arson운 them showed traits of multiple and short stems. As for the root characters, the length of taproot of KG 101 line was longer than that of local race, Jakyung-jong, or other lines ailed the root weight of KG 102 line waIn 15 % higher than that of local race. In general, KG 101, KG 103, KG 104, and Hwangsauk-jong had good root shape. Total amount of ginsenosides of ginseng taproot was the highest in KG 103 line than in local race and other lines. In these studies, we, elected three superior lines, KG 101, KG 102, and KG 103, having characteristic of good root shape, high yield, and large amount of ginsenoside, respectively.
In this paper, Service Boundary Line approximation method is proposed to improve the accuracy of aggregated link state information for source routing in transport networks that conduct hierarchical QoS routing. The proposed method is especially useful for aggregating links that have both delay and bandwidth as their QoS parameters. This method selects the main path weight in the network and transports the data to the external networks together with the aggregation information, reducing information distortion caused from the loss of some path weight during aggregation process. In this paper, the main path weight is defined as outlier. Service Boundary Line has 2k+5parameters. k is the number of outliers. The number of storage spaces of Service Boundary Line changes according to the number of outliers. Simulation results show that our approximation method requires a storage space that 1.5-2 times larger than those in other known techniques depending on outlier selection method, but its information accuracy of proposed method in the ratio between storage space and information accuracy is higher.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.