• Electrical & Electronic Materials
• /
• v.10 no.4
• /
• pp.349-354
• /
• 1997

This paper aims at studying the improvement of test method for t-weight sensitive fault (t-wsf) detect. The development of RAM fabrication technology results in not only the increase at device density on chips but also the decrease in line widths in VLSI. But, the chip size that was large and complex is shortened and simplified while the cost of chips remains at the present level, in many cases, even lowering. First of all, The testing patterns for RAM fault detect, which is apt to be complicated , need to be simplified. This new testing method made use of Local Lower Bound (L.L.B) which has the memory with the beginning pattern of 0(l) and the finishing pattern of 0(1). The proposed testing patterns can detect all of RAM faults which contain stuck-at faults, coupling faults. The number of operation is 6N at 1-weight sensitive fault, 9,5N at 2-weight sensitive fault, 7N at 3-weight sensitive fault, and 3N at 4-weight sensitive fault. This test techniques can reduce the number of test pattern in memory cells, saving much more time in test, This testing patterns can detect all static weight sensitive faults and pattern sensitive faults in RAM.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.159-165
• /
• 2001

In order to reserve abundant germplasm for breeding new corn varieties, major characteristics of ears and kernels were evaluated with a total of 210 Korean indigenous maize lines collected from various parts of Pusan City and Kynugnam Province, Korea The average ear length and ear diameter of indigenous maize lines collected was 12.52cm and 3.33 cm, respectively. The average ear weight of the maize lines was 63.70g. The ears collected from the north-west mountainous region were the heaviest, and The ears from the south coastal region were the lightest. The average kernel weight per ear was 50.54g, and the kernel weight per ear by region showed a tendency similar to the ear weight. The kernels of maize lines collected in the north-west mountainous region were the longest, and kernel width and thickness were the largest in the west plain region. 100 kernel weight and embryo weight the largest in the lines collected in the north-west mountainous region. The degree of pericarp thickness was the smallest in the lines collected in the south coastal region, and largest in the lines collected in the west plain region. Except for the correlation coefficient width and 100 kernel weight, all correlation coefficients between the characteristics of the lines showed highly significant differences.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1460-1465
• /
• 2007

In this paper, the conventional linear induction motor(LIM) used in propelling the MAGLEV in Korea is redesigned in order to reduce its weight. The specifications of the newly designed model for base speed, acceleration, rated thrust and maximum output is respectively 45km/h, 4.0km/h/sec, 5,200[N] and 65 [kW]. Weight reduction effect of the LIM according to the change of pole number from 8 to 6 is shown. Equivalent circuit analysis considering end effect and finite element method are used for the analysis of the redesigned model. Finally the weight reduction ratio of the newly designed LIM to the conventional model, thrust, attraction force, line current, temperature rise, flux density distribution are presented.

• Korean Journal of Poultry Science
• /
• v.29 no.2
• /
• pp.81-88
• /
• 2002

The objective of this study was to investigate the line-by-feed additive interaction on egg traits and yolk cholesterol level in laying hens. Hy-line W-98 (white shell line) and Hy-line Brown (brown shell line) were used as experimental stocks and three groups were assigned in each line. The age of hens used in this study were from 40- to 46-wk-old. Two different levels of chitosan were also used as additive in chicken diet. The first (CH$_{30}$) and second (CH$_{60}$) experimental groups were fed basal diet added 30mg and 60mg chitosan/kg feed, respectively. And the control group (CON) hens were fed with basal diet only. The eggs were collected and analyzed at the end of 40, 42, 44, and 46-wk-old. In the mean egg weight, the CH$_{30}$ in Hy-line Brown was significantly heavier (P<0.05) than CON, but the CH$_{30}$ in Hy-line W-98 was significantly lighter (P<0.05) than CON. Whereas, the mean egg weight did not significantly differ between CH$_{60}$ and CON in both line. The mean albumen percentage in Hy-line Brown did not show significant between experimental groups and control group. On the other hand, the mean albumen percentage of CH$_{60}$ in Hy-line W-98 was significantly lower (P < 0.05) than that of CON, but there was no significantly different between CH$_{30}$ and CON. In the mean yolk percentage, it showed a reverse trend as shown in the mean albumen percentage; there were significantly higher (P<0.05) in CH$_{60}$ than in CON fur the Hy-line W-98, and higher in CH$_{30}$ than in CON for the Hy-line Brown. However, the mean shell percentages did not significantly differ between experimental groups and control group in both lines. In the mean yolk cholesterol levels, the CH$_{30}$ and CH$_{60}$ in both lines were lower by 0.46 mg ∼2.80 mg per gram yolk than CON. Although the interaction effect of line-by-supplementing level of chitosan in hens diet on the pooled mean of yolk cholesterol level was no significant, it showed a highly significant interaction (P<0.01) at three of four experimental ages.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.1
• /
• pp.17-27
• /
• 2011

A selection experiment for reduced residual feed intake (RFI) in Yorkshire pigs consisted of a line selected for lower RFI (LRFI) and a random control line (CTRL). Longitudinal measurements of daily feed intake (DFI) and body weight (BW) from generation 5 of this experiment were used. The objectives of this study were to evaluate the use of random regression (RR) and nonlinear mixed models to predict DFI and BW for individual pigs, accounting for the substantial missing information that characterizes these data, and to evaluate the effect of selection for RFI on BW and DFI curves. Forty RR models with different-order polynomials of age as fixed and random effects, and with homogeneous or heterogeneous residual variance by month of age, were fitted for both DFI and BW. Based on predicted residual sum of squares (PRESS) and residual diagnostics, the quadratic polynomial RR model was identified to be best, but with heterogeneous residual variance for DFI and homogeneous residual variance for BW. Compared to the simple quadratic and linear regression models for individual pigs, these RR models decreased PRESS by 1% and 2% for DFI and by 42% and 36% for BW on boars and gilts, respectively. Given the same number of random effects as the polynomial RR models, i.e., two for BW and one for DFI, the non-linear Gompertz model predicted better than the polynomial RR models but not as good as higher order polynomial RR models. After five generations of selection for reduced RFI, the LRFI line had a lower population curve for DFI and BW than the CTRL line, especially towards the end of the growth period.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.270-280
• /
• 1988

This experiment was conducted to evaluate the main effects and pleiotropic effects of two comparable isogenic lines for culm and spike length in hulled barley and observed various agronomic characteristics, yield and yield components under the conditions of heavy fertilizer application and high planting densities. Three isogenic lines, culm, spike and culm and spike, were planted and to obtain basic data for improving high-yielding and quality of hulled barley at Experiment Farm, Dankook Univ., Cheonan city in 1985. Differences of culm length between two comparable isogenic lines, short culmed line (SCL) and medium culmed line (MCL), in isogenic lines for culm length showed highly significant differences. And differences of spike length between two comparable isogenic lines, short spike line (SSL) and medium spike line (MSL), in isogenic lines for spike length showed highly significant differences. Differences of culm and spike length between two comparable isogenic lines, short culmed and spike line (SCSSL) and medium culmed and spike line (MCMSL), short culmed and spike line (SCSSL) and long culmed and spike line (LCLSL), in isogenic lines for culm and spike length showed highly significant differences. Characteristics affected highly by the genes of culm length in isogenic lines for culm length were heading days, the 1st and 2nd internode length, No. of grains per spike, No. of spikes/m$^2$, and one litre weight. Characteristics affected highly by the genes of spike length in isogenic lines for spike length were No. of spike nodes, heading days, maturity days, thousand grain weight and one litre weight. Characteristics affected highly by the genes of culm and spike length in isogenic lines for culm and spike length were No. of spike nodes, the 2nd, 3rd and 4th internode length, thousand grain weight and grain yield. Grain yield of SCL, MSL, MCMSL and SCSSL was more than grain yield of MCL, SSL, SCSSL and LCLSL, respectively. Maturity days of SCL, MSL, SCSSL and LSLSL were faster than maturity days of MCL, SSL, MCMSL and SCSSL, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.175-184
• /
• 1995

In order to substitute sweet and super sweet maize hybrid seeds which are introduced at current, and to meet national demand for human consumption, inbreds and hybrids of waxy maize were developed by using Korean native lines, Six inbreds were used to produce 15 hybrids in a diallel cross, Six inbreds used were significantly different in tasseling dates, plant and ear heights, leaf area, and shank length, The inbred line, Bosung showed the longest shank length among the lines used, The ear characters like ear length and diameter, 100 kernel weight, row number, and kernel number per ear varied among lines, The inbred line Bosung was again significantly different from other lines in ear length and diameter, row number and 100 kernel weight. However, ]ewon had the highest kernel yield per 100. Hybrids were also different in plant and ear characteristics depending upon the inbreds used. The hybrids of Bosung showed the longest ear length and the heaviest kernel weight. Highest kernel yield per unit area was obtained by the hybrids crossed with Dangjin, The general combining ability(GCA) of Dangjin was found very effective in reducing plant and ear height of hybrids. The GCA of Jewon was very effective in increasing tiller number per plant. The inbred line Bosung was effective in increasing ear length and 100 kernel weight and in decreasing row number. The hybrid which showed the highest specific combining ability in ear length and 100 kernel weight was Jewon Chilbo.

• Smart Structures and Systems
• /
• v.23 no.3
• /
• pp.263-278
• /
• 2019

Moving train load parameters, including train speed, axle spacing, gross train weight and axle weights, are identified based on strain-monitoring data. In this paper, according to influence line theory, the classic moving force identification method is enhanced to handle time-varying velocity of the train. First, the moments that the axles move through a set of fixed points are identified from a series of pulses extracted from the second derivative of the structural strain response. Subsequently, the train speed and axle spacing are identified. In addition, based on the fact that the integral area of the structural strain response is a constant under a unit force at a unit speed, the gross train weight can be obtained from the integral area of the measured strain response. Meanwhile, the corrected second derivative peak values, in which the effect of time-varying velocity is eliminated, are selected to distribute the gross train weight. Hence the axle weights could be identified. Afterwards, numerical simulations are employed to verify the proposed method and investigate the effect of the sampling frequency on the identification accuracy. Eventually, the method is verified using the real-time strain data of a continuous steel truss railway bridge. Results show that train speed, axle spacing and gross train weight can be accurately identified in the time domain. However, only the approximate values of the axle weights could be obtained with the updated method. The identified results can provide reliable reference for determining fatigue deterioration and predicting the remaining service life of railway bridges.