• Journal of Chest Surgery
• /
• 제28권11호
• /
• pp.973-976
• /
• 1995

The assessment method of human body composion by bioelectrical impedance is very simple, safe, rapid and noninvasive. Based on prediction formulas for total body water from bioelectrical impedance, the observed weight loss should be associated with an increase in impedance. However in edematous patients for dialysis, the calculated total body water loss as calculated from impedance were overestimated and significantly higher than the weight loss after dialysis. So determination of impedance were made in 50 edematous patients before, during and after dialysis. Mean weight loss, which was assumed to be only loss of water was 1719$\pm$ 866 gr and mean impedance change was 71.0 $\pm$ 23.0 Ohm under 50kHz. Body weight loss was highly correlated [r>0.81 with the increase in body impedance under variable frequencies[1, 10, 20, 30, 40, 50 kHz . But there were no differences between frequences. In conclusion, clinical application of bioelectrical impedance method is useful for individual edematous patients with new correlation equation[Y=230+26.8X, X;Impedance change, Y;Calculated total body water loss .

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2344-2352
• /
• 2000

Mechanical joints such as bolted or riveted joints are widely used in mechanical components. The reliable determination of the stress intensity factors for cracks in bolted joints is needed to evaluate the safety and fatigue life of them. The weight function method is an efficient technique to calculate the stress intensity factors for various loading conditions because only the stress analysis of an uncracked model is required. In this paper the mixed-mode stress intensity factors for cracks in bolted joints are obtained by weight function method, in which the coefficients of weight function are determined by finite element analyses for reference loadings. Critical inclined angle that mode I stress intensity factor becomes maximum is determined and the effects of crack length and the magnitude of clearance on critical inclined angle are investigated.

• 한국경영과학회지
• /
• 제20권2호
• /
• pp.109-123
• /
• 1995

Weight of the factors to be considered in layout development with improvement-type heuristics is discussed in this paper. Determination of weight is especially important if it is designed to be used with an improvement-type heuristic. It is same as the value of variable coefficients in a multi-objective function as well as indices for departmental switching orders in the heuristic. Various weights are examined through computer simulation to verify whether the numerical values collected from machinery industries can be used as weights. And then a method to be used for searching an optimum or optimum-tending layout for machinery industries is presented using the weight.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.163-175
• /
• 2016

This paper presents a revised procedure for computation of double-K fracture parameters of concrete split-tension cube specimen using weight function of the centrally cracked plate of finite strip with a finite width. This is an improvement over the previous work of the authors in which the determination of double-K fracture parameters of concrete for split-tension cube test using weight function of the centrally cracked plate of infinite strip with a finite width was presented. In a recent research, it was pointed out that there are great differences between a finite strip and an infinite strip regarding their weight function and the solution of infinite strip can be utilized in the split-tension specimens when the notch size is very small. In the present work, improved version of LEFM formulas for stress intensity factor, crack mouth opening displacement and crack opening displacement profile presented in the recent research work are incorporated. The results of the double-K fracture parameters obtained using revised procedure and the previous work of the authors is compared. The double-K fracture parameters of split-tension cube specimen are also compared with those obtained for standard three point bend test specimen. The input data required for determining double-K fracture parameters for both the specimen geometries for laboratory size specimens are obtained using well known version of the Fictitious Crack Model.

• 대한화학회지
• /
• 제13권3호
• /
• pp.209-214
• /
• 1969

The experiment have been carried out for the determination of aggregation state of isopolytantalate anion in aqueous solution by using "Ultracentrifuge Method". The molecular weight of this anion at pH 10.7 could be determined as a heptatantalate anion $Ta_7O_{22}^{9-}$.

• 한국잠사곤충학회지
• /
• 제27권1호
• /
• pp.31-36
• /
• 1985

한성반문 및 한성란색 계통잠에 있어서 전좌염색체로 인한 생리적 결함이 전견중, 견층중 및 견층비율에 미치는 영향을 이들에 관한 성차를 지표로 하여 검토한 결과, 한성 및 비한성 계통견의 전견중의 성차 평균치는 각각 127%, 129%, 견층중의 성차는 각각 107%, 110%, 견층비율의 성차는 공히 85%였다. 이상의 결과에서 한성반문 및 한성 난색계통잠은 전견중, 견층중, 견층비율 등의 실용형질에 관한 한 전좌된 염색체편에 기인하는 생리적 결함은 극히 미소한 것으로 생각된다.

• 생물환경조절학회지
• /
• 제30권4호
• /
• pp.393-400
• /
• 2021

가축의 체중은 사료 요구량과 영양 상태를 평가하는 데 필요한 주요 지표에 해당한다. 본 연구는 한우의 3-D 영상으로부터 몸통 체적을 산출한 후 체중을 추정하고자 시도되었다. 한우의 3-D 영상 획득에 640×480 픽셀의 해상도, 44fps의 프레임속도 및 47°(H)×37°(V)의 화각을 갖는 TOF 카메라가 사용되었다. 획득된 3-D 영상에서 배경과 몸통 분리, 이상치 제거 등의 전처리 과정을 거쳐서 몸통에 대한 격자 영상을 얻었다. 또한 각각의 격자에 깊이 정보를 적용한 수치적분으로 몸통 체적을 결정하였다. Calibration dataset에서 체중과 몸통체적의 선형회귀에 대한 결정계수는 0.8725로 나타났다. 한편 몸통 체적에 월령을 설명 변수로 추가한 체중 추정의 중회귀 모형에서 결정계수는 0.9083으로 나타났다. Validation dataset에서 중회귀 모형을 이용한 체중 추정의 MAPE와 RMSE는 각각 8.2%, 24.5kg으로 나타났다. 결과적으로 체중 추정을 위한 회귀 모형의 성능이 개선되고, 체중 추정에 소요되는 노력이 절감됨을 고려한다면 3-D 영상에서 결정된 몸통 체적이 한우의 체중 추정에 유효한 변수로 사용될 것이다.

• 대한예방한의학회지
• /
• 제15권1호
• /
• pp.37-47
• /
• 2011

Objectives : Previous studies have shown that Fructus mume (FM) has anti-platelet effects. The present study was performed to determine the acute oral toxicity and quality control of a crude extract of FM in ICR mice. Methods : We investigated the in vivo single dose acute toxicity of FM 95% ethanol extract. This test was orally administered once by gavage to 20 male and 20 female mice at dose levels of 0 (control group), 1250, 2500 and 5000mg/kg body weight, respectively. Mortalities, clinical findings, autopsy findings and body weight changes were monitored daily for the 14 days following the administration. HPLC analysis was performed for the simultaneous determination of ursolic acid and p-hydroxycinnamic acid in FM. Reverse-phase chromatography using a C18 column and photodiode array detection at 211 nm was used for quantification of the two maker components. The mobile phase for gradient elution consists of water and acetonitrile. Results : We observed survival rates, general toxicity, change of body weight, and autopsy. The mice did not die after single oral administration of maximum dose of FM. Autopsy of animal revealed no abnormal gross finding. Therefore, $LD_{50}$ value of FM for ICR mice was more than 5000mg/kg on oral route. The HPLC analysis showed that ursolic acid and p-hydroxycinnamic acid amounts to 9.75- and 0.12% in the extract with the retention times of 47.99- and 15.38 minutes, respectively. Conclusions : These results suggest that no toxic dose level of FM in mice is considered to be more than 5000mg/kg. Consequently, it was concluded that FM have no effect on acute toxicity and side effect in ICR mice. For the quality control of FM extract, simultaneous determination of ursolic acid and p-hydroxycinnamic acid was established.

• 한국어류학회지
• /
• 제32권2호
• /
• pp.55-62
• /
• 2020

상대 무게 지수(Relative weight index, W_r)는 어류의 표준 무게와 실측 무게의 비율을 산출하는 지수로써 영양상태를 평가하는데 활용된다. 본 연구의 목적은 상대 무게 지수 활용을 위해 국내 담수어류 10종의 표준 무게 산출을 위한 길이-무게 상관관계(표준 LWRs)를 산출하는 것과, 상대 무게 지수 산출 결과에 대한 빈도 분포를 분석하는 것이다. 총 141개 조사 지점에서 798회 어류 채집을 통해 확보한 어류의 길이-무게 데이터를 활용하여 LWRs를 산출하였다. LWRs는 매개변수 a와 b값을 95% 신뢰한계(confidence limits)와 함께 제시하였으며, 모든 종에서 결정계수(r²)는 0.9 이상으로 산출되었고, b값은 Froese (2006)의 예상 범위에 포함되었다. 상대 무게 지수 산출 결과에 대한 빈도 분포 분석은 각 종별로 10~90 백분위수를 10 단위로 산출하여 제시하였으며, 이는 상대 무게 지수를 활용하여 어류의 영양상태를 정량적으로 평가하기 위한 기준으로 활용될 수 있을 것으로 판단된다.

• 대한화학회지
• /
• 제19권5호
• /
• pp.343-350
• /
• 1975

염산수용액중에 존재하는 이리듐을 그 분자량 아민(Alamine 336)의 벤젠용액으로 추출한 바 20${\sim}$100${\mu}g$의 이리듐을 정량적으로 추출할 수 있음을 알았고 이때 이리듐 추출의 가능성에 관하여는 방사성 추적자(Ir-192)를 써서 확인하였다. 유기층에 추출된 화학종의 흡광도를 파장 322.5nm에서 측정한 결과 본 방법은 이리듐의 정량을 위한 미량분석법으로 사용할수 있음을 알았다. 이리듐이 아민층에 추출되는 메카니즘에 대한 설명을 시도하였다.