• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.58-66
• /
• 2021

Spiral-wound woven wire meshes packed bed rotating cylinder electrode was used for the simultaneous removal of cadmium (Cd) and copper (Cu) from a binary solution. The effects of weight percent of each metal on the removal and current efficiencies were studied at an operating current of 345A, while the effect of current on the removal efficiency of both metals was investigated at three levels of current (240, 345.and 400 mA). The experiments were carried out at constant rotation speed 800 rpm, pH = 3, and a total concentration of metals (500 ppm). The results showed that the removal efficiency of copper increased from 89% to 99.4% as its weight percent increased from 20% to100%. In a similar fashion, the removal efficiency of cadmium increased from 81% to 97% as its weight percent increased from 20% to100%. The results confirmed that the removal efficiency of any metals declined in the presence of the other. Increasing of current resulted in increasing the removal efficiency of both metals at different weight percents. The results confirmed that current efficiencies for removing of copper and cadmium simultaneously decline with increasing of electrolysis time and weight percent of cadmium or with decreasing the weight percent of copper. Current efficiency was higher at the initial stage of electrolysis for all weight percents of metals. The results showed that the decay of copper concentration was exponential at all weight percents of copper, confirming that the electrodeposition of copper is under mass transfer control in the presence of cadmium. While the decay of cadmium concentration was linear at lower weight percent of cadmium then changed to an exponential behavior at high weight percent of cadmium in the presence of copper.

• Journal of the Korea Furniture Society
• /
• v.19 no.1
• /
• pp.83-90
• /
• 2008

Gypsum-wood composites were made by introducing inorganic substances into wood using calcium chloride, first treating solution, and sodium sulfate, secondary treating solution, by double diffusion process under atmospheric pressure at room temperature. The process conducted as follows: water saturated specimens were soaked in calcium chloride solutions at several concentration. Then the specimens were soaked further in saturated sodium sulfate solution, and they were leached in flowing tap water for 24h. To attain sufficient weight percent gain (WPG) values, the suitable concentration of calcium chloride and soaking time in saturated sodium sulfate solution were 20% and 48h, respectively. Inorganic substances were produced mainly in the lumina of tracheides. It was made sure that these substances were dihydrate gypsum($CaSO_4$ $2H_2O$) by X -ray microanalysis (SEM-EDX). The composites had good fire resistance due to low heat transfer rate of gypsum formed in wood. However, the composites had little decay resistances, because they showed high weight losses by test fungi attacks.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.66-70
• /
• 1997

In this paper a new learning algorithm for curvature smoothing and improved generalization for multi-layer neural networks is proposed. To enhance the generalization ability a constraint term of hidden neuron activations is added to the conventional output error, which gives the curvature smoothing characteristics to multi-layer neural networks. When the total cost consisted of the output error and hidden error is minimized by gradient-descent methods, the additional descent term gives not only the Hebbian learning but also the synaptic weight decay. Therefore it incorporates error back-propagation, Hebbian, and weight decay, and additional computational requirements to the standard error back-propagation is negligible. From the computer simulation of the time series prediction with Santafe competition data it is shown that the proposed learning algorithm gives much better generalization performance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.1-11
• /
• 1997

This study aims to estimate the relative importance of quality management items through the defect analysis in the landscape construction process. The RIQMI are decided by the defect coefficient and it's cause weight. The defect items in the landscape construction process were classified by 56 items based on the classification form of '96 landscape architectural construction standard and the cause pattern were categorized 4 types as design, material, construction, and environment factors. To analyze the defect coefficient and the aucse weight by defect, the researcher surveyed the questionnaires on the 103 engineers and the 31 experts on the landscape architectural construction. The result of this study are as follows. The relative importance by facilities pattern turn out to be much higher construction, material fator than design. environment factor in wood facilities, paving facilities, and steel facilities, the RIQMI is very high in timber crack, timber vending, faulty of timber against decay, welding faulty of steel facilities in material factor, and timber crack, faulty of timber against decay, finish faulty of steel facilities, welding faulty of steel facilities in construction factor.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.73-78
• /
• 2008

Inorganic chemical treated wood was prepared by impregnation of calcium or magnesium chloride ($CaCl_2$ or $MgCl_2$) solution and immersion in saturated solution of ammonium fluoride ($NH_4F$) as a reactant in order to make an introduction of a refractory fluorides with fungicidal and insecticidal effects in wood. The weight percent gains (WPGs) were increased with increase in concentration of calcium chloride or magnesium chloride solution, and were higher in treatment with calcium chloride than with magnesium chloride. Inorganic substances were produced mainly in the lumina of tracheides. These substances were proved to be the calcium fluoride or magnesium fluoride by the energy dispersive X-ray analyzer in conjunction with a scanning electron microscope (SEM-EDX). The treated wood showed good decay resistance because the weight losses were hardly occurred by the test fungi such as Tyromyces palustris and Trametes versicolor. The fire resistance effect was superior to the treated wood compared with that of the untreated wood.

• Korean Journal of Agricultural Science
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2012

Rapid loss of grape berry quality after harvest occurs due to poor postharvest management. Understanding physiological properties between cultivars is required to develop practical technologies to control fast quality deterioration of tables grapes. Physiological characteristics of whole cluster, rachis and berries were examined to find their effects on postharvest behaviour of table grapes. 'Tamnara' showed high respiration rate and browning of rachis compared to 'Campbell Early'. Weight loss of rachis of 'Cheongsoo' was highest of three cultivars. Berry decay in 'Cheongsoo' begins at the connection portion between peduncle and berry, and berry decay of 'Cheongsoo' was the most severe among three cultivars. Precooling at $0^{\circ}C$ showed better results than cooling at $10^{\circ}C$ regardless of cultivars but cooling effect decreased when simulated marketing period increased up to 10 days. Plastic film wrapping was effective on reducing decay in general but not at higher marketing temperature. For successful commercialization of newly developed grapes, the inhibition technology of rachis browning in 'Tamnara' is required and decay control in 'Cheongsoo' through establishment of cold chain system is recommended.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.291-295
• /
• 2008

Weight loss and nutrient dynamics of oak and pine leaf litter during decomposition were investigated from December 2005 through June 2008 at Mt. Worak National Park as a part of National Long-Term Ecological Research Program in Korea. The decay constant (k) of oak and pine leaf litter were 0.314 and 0.217, respectively. After 30 months decomposition, remaining weight of oak and pine leaf litter was 45.5% and 58.1%, respectively. Initial C/N ratio of oak and pine leaf litter was 53.4 and 153.0, respectively. Carbon % of initial oak and pine leaf litter was similar with each other; however, nitrogen content of initial oak leaf litter (0.85%) was greater than that of initial pine leaf litter (0.33%). N and P concentration in both decomposing leaf litter increased significantly during decomposition. There was no net N and P mineralization period in decomposing pine leaf litter. K, Ca and Mg concentration in both decomposing leaf litter showed different pattern with those of N and P. After 30 months decomposition, remaining nutrients in oak and pine leaf litter were 97.7 and 216.2% for N, 123.2 and 216.5% for P, 39.3 and 44.8% for K, 47.9 and 40.6% for Ca, 30.7 and 51.2% for Mg, respectively.

• Applied Biological Chemistry
• /
• v.24 no.4
• /
• pp.218-223
• /
• 1981

This study was conducted to investigate the effects of post-harvest drying method and subsquent storage condition on the quality of garlic bulbs for 10 months from July, 1980 to April, 1981. The 27% weight loss of garlic bulbs by HPHD (hot air post-harvest frying) for 12 days at $40^{\circ}C$ (8hrs/day) was equal to that by NPHD (conventional natural post-harvest drying) for 35 days. But the decay occured 5.5% only in NPHD. During the storage period of garlic bulbs by HPHD, their decay and weight ]oss were less 25.4% and 13.5% in ambient storage, and less 14.2% and 7.5% in low temperature storage than those of NPHD. When garlic bulbs were stored in low temperature, the weight loss and decay were less 20.0% and 22.4% in NPHD, and tess 14.0% and 9.9% in HPHD than those in ambient temperature storage. The Quality of garlic bulbs packed with 0.08mm polyethylene film stored at ambient temperature for 2 months was so poor as to be inedible because of the adverse effect of $CO_2$ and the growth of molds, but in low temperature storage for 10 months it was in good shape showing the weight loss, the decay and the sprouting 2.6%, 3.4% and 26.8%, respectively.

• Korean Journal of Agricultural Science
• /
• v.31 no.2
• /
• pp.77-86
• /
• 2004

This study was aimed to determine the effect of high molecular weight chitosan treatment on the decay incidence and fruit quality in strawberries. Preharvest spray of chitosan (0.2%) effectively reduced the incidence of grey mould and increased fruit firmness. Chitosan application was also effective on remaining of surface gloss. This is probably due to coating effect. Physiological disorders were not found in treatment of 4 sprays. Internal quality such as soluble solid content and acidity seemed not to be affected by chitosan application. The effect of chitosan on keeping freshness was clear in fruit without physical damage at harvest, but much less effective in injured fruit. Postharvest application of chitosan did not affect fruit quality. Above results indicated that chitosan is an alternative to keep strawberry quality through delaying decay and keeping firmness.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.166-166
• /
• 1982

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long tenn base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.