• 제목/요약/키워드: wedge

검색결과 1,447건 처리시간 0.03초

Dynamic Wedge의 조직내 방사선량 분포의 특성 (Dosimetric Characteristics of Dynamic Wedge Technique)

  • 오영택;금기창;추성실;김귀언
    • Radiation Oncology Journal
    • /
    • 제14권4호
    • /
    • pp.323-332
    • /
    • 1996
  • 목적 : 방사선 치료에 있어서 조직내 등선량 분포곡선을 변형시킬 목적으로 쐐기 차폐물이 사용되고 있는데 최근 기존의 고정 쐐기와는 다르게 비대칭적인 콜리메이터인 Independent Jaw에 의해 등선량 분포곡선을 변형시키는 동적 쐐기 기법이 실용화 되고 있으나 아직 그 방사선 물리학적인 특성에 대해서는 잘 알려져 있지 않다. 이에 본 저자는 기존의 고정 쐐기와 비교하여 조직내 방사선량 분포의 특성을 알아보고자 본 연구를 계획하였다. 대상 및 방법 : 물 판톰, 폴리 스타이린 판톰, 평균 유방 모형 판톰을 대상으로 전리함, 필름, TLD 등을 이용하여 동적 쐐기와 고정 쐐기의 선량 분포를 측정하여 비교하였다. 방사선원은 선형 가속기의 6MV x선을 사용하였고 $15{\times}15$ 조사면에서 15, 30, 45도 쐐기를 이용하였다 조직내선량 분포는 전리함과 필름 선량계를 사용하였고, 유방 접선 치료방식에서의 반대편 유방 조사선량은 TLD를 사용하였다. 결과 : 1) 조직내 $\%$심도 선량은 고정 쐐기의 경우 심도 선량 깊이가 깊어지는 방사선의 경화 현상이 뚜렷하였으나 동적 쐐기의 경우에는 발견할 수 없었으며 그 $\%$심도선량은 개방 조사면과 유사하였다. 2) 조직내 등선량 분포 곡선을 보면 동적 쐐기의 경우 고정 쐐기와는 달리 원하는 깊이, 원하는 조사면에서 원하는 쐐기 각도를 얻을 수 있었으며 쐐기 각도를 이루는 등선량 분포 곡선이 고정 쐐기에 비해 더욱 직선적이었다. 3) 산란선량은 동적 쐐기의 경우 개방 조사면과 그 양이 거의 동일하였으며 유방보존술에서의 접선 조사방식의 방사선치료에서 고정 쐐기 대신에 동적 쐐기를 사용함으로써 반대측 유방으로의 피폭선량을 감소시킬 수 있었다. 결론적으로 동적 쫴기 기법은 단순히 고정 쐐기를 대체할 수 있을 뿐만 아니라 고정 쐐기의 단점을 보완해 줄 수 있으며 향후 방사선 치료에 있어서 더 다양한 유용성을 가질 수 있으리라 생각한다.

  • PDF

DYNAMIC WEDGE의 임상 적용 가능성에 관한 고찰

  • 김영범;정세영;황웅구
    • 대한방사선치료학회지
    • /
    • 제7권1호
    • /
    • pp.103-110
    • /
    • 1995
  • Dynamic wedge system has been introduced to modify the beam profile and to make homogeneous isodose curves in the mass of irregular shape. Before the clinical use of dynamic wedge, several factors such as wedge transmission factor, dose profile, percent depth dose, and wedge angle have to be measured quantitatively. Film dosimetry is used to evaluate these factors in this study. A comparison of the result of the dynamic wedge to physical wedge system is made. A positive result for the application of the dynamic wedge to clinic is derived even though there is a limitation in accuracy of the dosimetry system used. To measure all factors quantitatively, more accurate dosimetry systems are required.

  • PDF

기능상쐐기와 물질쐐기의 쐐기인수의 비교 (Comparison of Wedge Factors of Dynamic Wedge and Physical Wedge)

  • 김재성;강위생
    • 한국의학물리학회지:의학물리
    • /
    • 제15권4호
    • /
    • pp.237-246
    • /
    • 2004
  • 국제방사선량 및 측정위원회(ICRU)가 쐐기인수를 정의하고 있지만 방사선치료계획장치는 쐐기에 관한 다른 개념을 도입하여 선량을 보정하기도 한다. 개념이 다른 인수들은 아주 다르게 정의되어 있기 때문에 그 값도 용납될 수 없을 정도로 다를 수 있어서 심각한 선량오차가 발생될 수 있다. 설치된 방사선치료기(Cinac 21EX, Varian, 미국)에는 물질쐐기(위와 아래)와 위턱에 의한 쐐기 기능이 있고 방사선치료계획장치(RTPS)로 Eclipse(Varian, 미국)와 Pinnacle$^{3}$(ADAC, 미국)가 사용되고 있다. 물질쐐기와 기능상쐐기의 쐐기인수, 쐐기상대출력인수 및 쐐기출력인수를 물팬톰에서 이온함으로 측정하여 조사면크기와 쐐기위치, 쐐기각, X선 투과력, 측정조건에 따라 분석하고 비교하였다. 기능상쐐기가 물질쐐기에 비해 여러 가지 요인에 크게 영향을 받으며, 기능상쐐기의 쐐기인수 등에 영향을 미치는 주된 요인은 조사면크기와 쐐기각 이었다. X선 투과력도 쐐기인수 등에 약간의 영향을 미쳤다. 쐐기에 관련된 상이한 개념의 인수는 그 값이 6 MV는 63%, 15 MV는 59% 이상 다를 수 있기 때문에 선량오차를 줄이기 위해 방사선치료계획장치에 활용되는 인수를 파악하고 RTPS에 합당한 값을 입력해야 한다.

  • PDF

Effects of Combined Wedge on Angle and Moment of Ankle and Knee Joint During Gait in Patients With Genu Varus

  • Yang, Hae Sun;Choi, Houng Sik
    • 국제물리치료학회지
    • /
    • 제7권2호
    • /
    • pp.1025-1030
    • /
    • 2016
  • The purpose of this study was to investigate the effects of combined wedge on the range of motion in ankle and knee joint, ankle eversion moment and knee adduction moment, and center of pressure excursion of foot for genu varus among adult men during gait. This study was carried out with 10 adult men for genu varus in a motion analysis laboratory in J university. The subjects of the experiment were measured above 5cm width between the knees on contact of both medial malleolus of ankle while standing. The width of their knees in neutral position was measured without the inversion or eversion of the subtalar joint by the investigator. The subjects of the experiment were ten who were conducted randomly for standard insole, insole with $10^{\circ}$ lateral on rear foot wedge, insole at $10^{\circ}$lateral on rear foot and $5^{\circ}$ medial on fore foot wedge. Before and after intervention, changes on the range of motion in ankle and knee joint, ankle eversion moment and knee adduction moment, and center of pressure excursion were measured. In order to compare analyses among groups; repeated one-way ANOVA and $Scheff{\acute{e}}$ post hoc test were used. As a result, combined wedge group was significantly decreased compared to control wedge group in terms of knee varus angle in mid-stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge group in terms of ankle eversion moment in whole stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge group in terms of knee adduction moment in whole stance(p<.05). Combined wedge group was significantly decreased compared to lateral wedge in terms of center of pressure excursion in whole stance(p<.05). The results of this study suggest that combined wedge for genu varus decreased ankle eversion moment and knee adduction moment upon center of pressure excursion. We hypothesize that combined wedge may also be effective in the protection excessive ankle pronation.

컨테이너 크레인용 레일클램프의 U형 쐐기 형상설계 (Shape Design of the U-Type Wedge of the Rail Clamp for a Container Crane)

  • 한동섭;한근조
    • 동력기계공학회지
    • /
    • 제13권6호
    • /
    • pp.117-122
    • /
    • 2009
  • The wedge type rail clamp compresses the rails with small clamping force at first, and with large clamping force when the wind speed increases because of the wedge working. If the supporter is not installed in the rail clamp with V-type wedge when the wind speed increases more and more, the structure will occur overload which leads the structure to fracture. But in the clamp with U-type wedge the supporter is not necessary because the tangential angle of the wedge increases as the sliding distance increases. The proper shape of U-type wedge is determined by the initial clamping force and the tangential angle of the wedge. Accordingly we, first carry out the finite element analysis in order to analyze the relation between the sliding distance and the wedge angle. Next we suggest the proper shape of U-type wedge as analyze the relation between the radius of curvature and the sliding distance.

  • PDF

컨테이너 크레인용 쐐기형 레일 클램프의 쐐기각에 대한연구 (Study on the Wedge Angle of Wedge Type Rail Clamp for Container Crane)

  • 한근조;이호;심재준;한동섭;안찬우;전영환
    • 한국정밀공학회지
    • /
    • 제21권9호
    • /
    • pp.119-126
    • /
    • 2004
  • In this paper, we design a wedge type rail clamp which can protect container crane from a sudden strong blast with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine the angle of wedge and analyze a contact condition of roller and wedge so that we might develop a wedge type rail clamp for parking devices of port cargo working system with variable capacity. Therefore, this paper suggests a process to decide wedge angles within feasible range which could be obtained using load analysis and FEA of wedge type rail clamp

Wedge Factor의 임상적 응용 (Clinical Application of Wedge Factor)

  • 최동락;안용찬;허승재
    • Radiation Oncology Journal
    • /
    • 제13권3호
    • /
    • pp.291-296
    • /
    • 1995
  • 목적 : 환자에 투여될 선량계산시 사용되는 wedge factor는 조사면과 깊이에 대한 의존성은 무시되고 에너지 및 wedge angle에 따라 측정하는 것이 일반적이다. 본 연구에서는 wedge factor의 조사면과 깊이에 따른 의존성을 체계적으로 조사함으로써 보다 합리적인 선량계산을 도모하고자 한다. 방법 : 4-, 6-, 그리고 10-MV X 선을 이용하여 각각의 wedge angle에 따라서 $5{\times}5\;cm^2$부터 $20{\times}20\;cm^2$ 까지의 조사면에 대해서 여러 깊이에서 측정하였으며 측정된 값을 열린 조사면에서의 측정값으로 나누어 줌으로써 wedge factor가 결정되었다. 이 때 사용된 가속기는 본원이 보유하고 있는 CLINAC 600C 와 2100C 이며 사용된 에너지는 6- 그리고 10-MV X 선을 사용하였다. 측정기가 빔의 중심에 정확히 놓여졌는지를 확인하기 위하여 여러 콜리메이터 각도에서 측정하였다. 결과 : 각 측정값의 재연성에 관한 표준편차는 $0.3\;%$ 이내였으며 각각의 에너지에 대해 깊이에 따라 측정된 wedge factor의 의존성은 저에너지로 갈수록 커지는 경향을 보였다. 특히 4-, 6- X 선의 경우 wedge angle이 $45^{\circ}$ 이상일 때 깊이에 따른 wedge factor의 변화량은 $5\%$ 이상 차이가 남을 알 수 있었다. 반면에 wedge factor의 조사면에 대한 의존성은 거의 나타나지 않았다. 결론 : 측정을 통하여 wedge factor는 조사면에 대해서는 거의 무관하나 깊이에 따른 의존성이 비교적 크게 나타남을 알 수 있었다. 따라서 선량계산시 wedge factor를 합리적으로 평가하기 위해서는 평균값을 나타내는 깊이에서 측정된 값을 사용하거나 깊이에 따라서 wedge factor를 달리 적용시켜야 한다. 본 실험의 결과, 각 wedge filter에 대해 단일 wedge factor를 사용하고자 하면 조사면 $10cm{\times}10cm$, 깊이 10cm에서 측정된 값을 쓰는 것이 가장 합리적임을 알 수 있었다.

  • PDF

도체와 유전체가 복합된 쐐기에 의한 E-편파된 전자파의 회절, II:확장된 회절계수 (E-polarized electromagnetic diffraction by a composite wedge, II:Extended diffraction coefficients)

  • 김세윤;김상욱
    • 전자공학회논문지D
    • /
    • 제34D권7호
    • /
    • pp.1-7
    • /
    • 1997
  • The physical optical solution to the E-polarized diffraction by a composite wedge consisting of perfect conductor and lossless dielectric cannot sayisfy not only the boundary conditions at the wedge interfaces but also the edge condition at the wedge tip. Its diffraction coefficients are extended outside the composite wedge to become the exact solution to the perfectly conducting wedge as its relative dielectric constant increases to infinite or decreases to 1. It is assured that the extended diffraction coefficients approach zero in the arificially complementary region of the composite wedge.

  • PDF

가상쐐기와 기존쐐기의 물리적 특성 비교 (Physical Characteristics Comparison of Virtual Wedge Device with Physical Wedge)

  • 조정근;최계숙;임청환;김정구;정홍량;이정옥;이만구
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제24권2호
    • /
    • pp.49-52
    • /
    • 2001
  • We compared the characteristics of Siemens virtual wedge device with physical wedges for clinical application. We investigated the characteristics of virtual and physical wedges for various wedge angles (15, 30, 45, and 60) using 6- and 15-MV photon beams. Wedge factors were measured in water using an ion chamber for various field sizes and depths. In case of virtual wedge device, as upper jaw moves during irradiation, wedge angles were estimated by accumulated doses. These measurements were performed at off-axis points perpendicular to the beam central axis in water for a $15\;cm\;{\times}\;20\;cm$ radiation field size at the depth of 10 cm. Surface doses without and with virtual or physical wedges were measured using a parallel plate ion chamber at surface. Field size was $15\;cm\;{\times}\;20\;cm$ and a polystyrene phantom was used. For various field sizes, virtual and physical wedge factors were changed by maximum 2.1% and 3.9%, respectively. For various depths, virtual and physical wedge factors were changed by maximum 1.9% and 2.9%, respectively. No major difference was found between the virtual and physical wedge angles and the difference was within 0.5. Surface dose with physical wedge was reduced by maximum 20% (x-ray beam : 6 MV, wedge angle : 45, SSD : 80 cm) relative to one with virtual wedge or without wedge. Comparison of the characteristics of Siemens virtual wedge device with physical wedges was performed. Depth dependence of virtual wedge factor was smaller than that of physical wedge factor. Virtual and physical wedge factors were nearly independent of field sizes. The accuracy of virtual and physical wedge angles was excellent. Surface dose was found to be reduced using a physical wedge.

  • PDF

MINIMAL BASICALLY DISCONNECTED COVERS OF PRODUCT SPACES

  • Kim Chang-Il
    • 대한수학회논문집
    • /
    • 제21권2호
    • /
    • pp.347-353
    • /
    • 2006
  • In this paper, we show that if the minimal basically disconnected cover ${\wedge}X_\imath\;of\;X_\imath$ is given by the space of fixed a $Z(X)^#$-ultrafilters on $X_\imath\;(\imath=1,2)\;and\;{\wedge}X_1\;{\times}\;{\wedge}X_2$ is a basically disconnected space, then ${\wedge}X_1\;{\times}\;{\wedge}X_2$ is the minimal basically disconnected cover of $X_1\;{\times}\;X_2$. Moreover, observing that the product space of a P-space and a countably locally weakly Lindelof basically disconnected space is basically disconnected, we show that if X is a weakly Lindelof almost P-space and Y is a countably locally weakly Lindelof space, then (${\wedge}X\;{\times}\;{\wedge}Y,\;{\wedge}_X\;{\times}\;{\wedge}_Y$) is the minimal basically disconnected cover of $X\;{\times}\;Y$.