• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.1-6
• /
• 2010

This study presents the practical design modification to improve the retracting performance of the pyro-typed high power pretensioner. 3 components of the pretensioner are redesigned and the usefulness of the design modification is verified by the experiment. During the pretensioning process, the gas blast generated from the gunpowder is transferred to the rack-pinion gear through the manifold. The rack-pinion gear is connected with the spool where the webbing is rolled up. According to the rotation of the pinion, the spool is turned and the webbing is winded. To help the gas blast flow well, the shape of the inner cross section of the manifold is changed. The spur gear design program is developed and used to find the best combination of the rack-pinion gear pair to increase the power transmission efficiency. The pinion guide is installed on the spool to prevent the vibration of the pinion. As a result of the experiment, the amount of the web retraction length is increased when every single design modification is applied. Therefore, the retracting performance of the pretensioner is considered to be improved if the presented design modifications are applied.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2013

High loading of printing and writing grades with fillers has many advantageous aspects in papermaking because it allows decreasing fiber use and reducing manufacturing cost. High loading technology, however, has some disadvantageous aspects as well. It decreases physical properties of papers, especially strength properties. The problem associated with high loading can be reduced by applying surface sizing starch solution onto paper surface. It is important to control the penetration of the surface sizing starch solution into paper web to obtain the desired property improvement. In this study, the effect of the addition of two polymers into starch solution on paper properties has been examined. PVOH and polyDADMAC were used as polymeric additives for surface sizing with oxidized starch. Viscosity of starch solutions and surface roughness of dried starch films on glass slides showed that some interactions between polymeric additives and oxidized starch have been occurred and the most extensive interaction with starch solution was obtained with high molecular weight polyDADMAC. Low molecular weight PVOH was most effective in improving folding endurance and internal bond strength. On the other hand, polymer addition showed no effect on surface strength of paper. This indicates that not the level of starch holdout but the bonding strength of starch itself has predominant influence on surface strength of paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.77-84
• /
• 2012

The lithographic process depends on a satisfactory ink-in-water emulsion being formed during printing and the speed of wet presses makes the choice of fountain solution vitally important as the ink and fount must react quickly to form a stable emulsion. Ink and water come into contact with each other on the rolls of the press and are forced together in the roll nips. The water is not soluble in the ink since it is slightly fat. Instead, an emulsion is formed, a heterogeneous mass consisting of small water drops mixed into the ink, if the water feed is too great. This emulsification can affect the properties of an off-set ink and negatively affect the printability. So we investigated the effects of the emulsification of phenol free heat-set ink and existing heat-set ink on printed quality, such as amount of ink transfer, printed density, print-through and uniformity. We used Duke emulsification tester for the emulsification of inks, and used IGT printability tester for printed quality. The printed quality were measured by densitometer and were evaluated by the image analysis system. Compared to conventional printing ink, phenol-free ink showed better results of the printability at the emulsification.

• The Journal of Pediatrics of Korean Medicine
• /
• v.22 no.1
• /
• pp.13-24
• /
• 2008

Objectives This study was designed to analyze the clinical studies on Mental retardation(MR) in traditional Chinese medicine(TCM). Methods For this study, we searched the clinical studies on MR, which had been published from 2003 to 2007, through web site CNKI(中國知識基礎設施工 http://www.cnki.net). There were 17 clinical studies and we focused on those studies. Results 1. In those Chinese studies, they used following words to describe Mental retardation; 小人弱智($xi\check{a}o\acute{e}rru\grave{o}zh\grave{i}$), 智能發育不全($zh\grave{i}n\acute{e}ngf\bar{a}y\grave{u}buqu\acute{a}n$), 智力低下($zh\grave{i}l\grave{i}d\bar{i}xi\grave{a}$), 精神發育遲滯($j\bar{i}ngsh\acute{e}f\bar{a}y\grave{u}ch\acute{i}zh\grave{i}$), 智能落后($zh\grave{i}n\acute{e}nglu\grave{o}h\grave{o}u$), 智能落后($zh\grave{i}n\acute{e}ngch\acute{i}hu\check{a}n$), 失天愚型患人($xi\bar{a}nti\bar{a}ny\acute{u}x\acute{i}nghu\grave{a}n'\acute{e}r$). 2. There were many kinds of TCM treatment methods for MR, such as herbal medicine, acupuncture, electroacupunture, acupoint injection, Chuna therapy, and special education. And those TCM treatments methods showed higher efficacies in the treatment of MR compared with Western medicine. 3. Mental retardation was related with the deficiency of heart, kidney, liver, spleen(心虛, 腎虛, 肝虛, 脾虛) and the pathological mechanism of Phlegm(絹) and Blood stasis(慫沂)in the studies about the Bian Zheng-the types of differential diagnosis- of MR. 4. Most of studies used Intelligence Quotient(IQ) to assess the efficacy of TCM treatment of MR. And the duration of treatment, the degree of illness, the age of patient, and the cause of illness affected the prognosis of MR. Conclusions These results suggest that traditional medicine could be one of the useful treatments on MR. And these results could be used in the clinical practices and studies on MR in Korea.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.46-51
• /
• 1990

Laser plasma was generated by a 1GW iodine photodissociation laser ($\lambda$=1.315$\mu\textrm{m}$, E=12.7J) whose output beam was focused on a molybdenum target surface. The experiment was conducted in a vacuum chamber under 1D-sTorr and several tens of laser shooting were necessary for sufficient exposure for the PBS resist of 111m thickness. Aluminium was coated on the top of the resist by 0.1$\mu\textrm{m}$ thickness which acts as an X-ray filter to cut off the visible and the ultraviolet lights. A bio-specimen was put directly on the aluminium coated resist and located at a distance of 3 cm from the X-ray source. The replicas of a steel mesh, spider's web. and a red blood cell were obtained by this technique and were observed by Nomarski microscope and SEM. The limitation of its resolution is determined by the X-ray source size and Fresnel diffraction effect, and its theoretical prediction is well matched with the experimental results. In this experiment, a resolution better than 0.1$\mu\textrm{m}$ could be obtained. ained.

• Healthcare Informatics Research
• /
• v.24 no.4
• /
• pp.292-299
• /
• 2018

Objectives: The aim of the present study was to assess the frequency of use, and preferences regarding information and communication technologies (ICTs) among Ecuadorian patients with chronic kidney disease (CKD) undergoing hemodialysis. Methods: We conducted an anonymous cross-sectional survey-based study from January 2016 to April 2017, involving 393 patients with end-stage renal disease from 9 hemodialysis centers, in which they rated their use and preferences of various ICTs through a modified version of the Michigan Questionnaire. The questionnaire collected information regarding demographics, patients' interest in obtaining health-related information through ICTs, and interest in using ICTs as a potential way to communicate with their healthcare providers. A chi-square test for association and adjusted regression analyses were performed. Results: Among all patients who participated, 64.3% reported owning a cellphone, with less than a third reporting active Internet connection. The most used ICT for obtaining information about CKD and/or hemodialysis was web-based Internet, followed by YouTube. SMS was rated the highest to receive and seek health-related information, followed by Facebook. Younger age and higher levels of education were associated with a higher overall usage of ICTs. Finally, more than half of the patients reported interest in using WhatsApp for communicating with their healthcare providers. Conclusions: Understanding the preferences of ICTs among patients with CKD undergoing hemodialysis could help to improve their outcomes through the potential uses and benefits of ICTs. Further research is needed to assess their role in improving the care of patients with chronic diseases.

• Journal of Environmental Health Sciences
• /
• v.50 no.1
• /
• pp.43-53
• /
• 2024

Background: Exposure assessment is an important part of risk assessment for consumer products. Exposure models are used when estimating consumer exposures by considering exposure routes, subjects, and circumstances. These models differ based on their tiers, types, and target populations. Consequently, exposure estimates may vary between models. Objectives: This study aimed to compare the results of different exposure models using identical exposure factors. Methods: Chemical exposure from consumer products was calculated using four consumer exposure assessment models: Targeted Risk Assessment 3.1, Consumer Exposure Model 2.1 (CEM), ConsExpo web 1.1.1, and the Korean Exposure Algorithm (primary and detailed) issued by the Ministry of Environment, No. 972 (MOE). The same exposure factors were used in each model to calculate inhalation and dermal exposures to acetaldehyde, d-limonene, and naphthalene in all-purpose cleaners, leather coating sprays, and sealants. Results: In the results, TRA provided the highest estimate. Generally, MOE (detailed), CEM and ConsExpo showed lower exposures. The inhalation exposure for leather coating spray showed the largest differences between models, with differences reaching up to 1.2×10⁷ times. Since identical inputs were used for the calculations, it is likely that the models significantly influenced the estimated results. Conclusions: Despite using the same exposure factors to calculate dermal and inhalation exposures, the results varied substantially based on the model's exposure algorithm. Therefore, selecting an exposure model for assessing consumer products should be done with careful consideration.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.346-362
• /
• 2021

A sediment control dam is an artificial structure built to prolong sedimentation in the main dam by reducing the inflow of suspended solids. These dams can affect changes in dissolved organic matter (DOM) in the water body by changing the river flow regime. The main DOM component for Yeongju Dam sediment control of the Naeseongcheon River was analyzed through 3D excitation-emission matrix (EEM) and parallel factor (PARAFAC) analyses. As a result, four humic-like components (C1~C3, C5), and three proteins, tryptophan-like components (C2, C6~C7) were detected. Among DOM components, humic-like components (autochthonous: C1, allochthonous: C2~C3) were found to be dominant during the sampling period. The total amount of DOM components and the composition ratio of each component did not show a difference for each depth according to the amount of available light (100%, 12%, and 1%). Throughout the study period, the allochthonous organic matter was continuously decomposing and converting into autochthonous organic matter; the DOM indices (fluorescence index, humification index, and freshness index) indicated the dominance of autochthonous organic matter in the river. Considering the relative abundance of cyanobacteria and that the number of bacteria cells and rotifers increased as autochthonous organic matter increased, it was suggested that the algal bloom and consequent activation of the microbial food web was affected by the composition of DOM in the water body. Research on DOM characteristics is important not only for water quality management but also for understanding the cycling of matter through microbial food web activity.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.23-46
• /
• 2017

Although there have been cases of evaluating the value of specific companies or projects which have centralized on developed countries in North America and Europe from the early 2000s, the system and methodology for estimating the economic value of individual technologies or patents has been activated on and on. Of course, there exist several online systems that qualitatively evaluate the technology's grade or the patent rating of the technology to be evaluated, as in 'KTRS' of the KIBO and 'SMART 3.1' of the Korea Invention Promotion Association. However, a web-based technology valuation system, referred to as 'STAR-Value system' that calculates the quantitative values of the subject technology for various purposes such as business feasibility analysis, investment attraction, tax/litigation, etc., has been officially opened and recently spreading. In this study, we introduce the type of methodology and evaluation model, reference information supporting these theories, and how database associated are utilized, focusing various modules and frameworks embedded in STAR-Value system. In particular, there are six valuation methods, including the discounted cash flow method (DCF), which is a representative one based on the income approach that anticipates future economic income to be valued at present, and the relief-from-royalty method, which calculates the present value of royalties' where we consider the contribution of the subject technology towards the business value created as the royalty rate. We look at how models and related support information (technology life, corporate (business) financial information, discount rate, industrial technology factors, etc.) can be used and linked in a intelligent manner. Based on the classification of information such as International Patent Classification (IPC) or Korea Standard Industry Classification (KSIC) for technology to be evaluated, the STAR-Value system automatically returns meta data such as technology cycle time (TCT), sales growth rate and profitability data of similar company or industry sector, weighted average cost of capital (WACC), indices of industrial technology factors, etc., and apply adjustment factors to them, so that the result of technology value calculation has high reliability and objectivity. Furthermore, if the information on the potential market size of the target technology and the market share of the commercialization subject refers to data-driven information, or if the estimated value range of similar technologies by industry sector is provided from the evaluation cases which are already completed and accumulated in database, the STAR-Value is anticipated that it will enable to present highly accurate value range in real time by intelligently linking various support modules. Including the explanation of the various valuation models and relevant primary variables as presented in this paper, the STAR-Value system intends to utilize more systematically and in a data-driven way by supporting the optimal model selection guideline module, intelligent technology value range reasoning module, and similar company selection based market share prediction module, etc. In addition, the research on the development and intelligence of the web-based STAR-Value system is significant in that it widely spread the web-based system that can be used in the validation and application to practices of the theoretical feasibility of the technology valuation field, and it is expected that it could be utilized in various fields of technology commercialization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.470-486
• /
• 1995

Mammary epithelial cells contain a subpopulation of cells with a large proliferativ potential which are responsible for the maintenance of glandular cellularity and are the progenitor cells of mammary cancer. These clonogens give rise to multicellular clonal alveolar or ductal units(AU or DU) on transplantation and hormonal stimulation. To isolate putative mammary clonogens, enzymatically monodispersed rat mammary epithelial cells from organoid cultures and from intact glands are sorted by flow cytometry according to their affinity for FITC labeled peanut lectin(PNA) and PE labeled anti-Thy-1.1 antibody(Thy-1.1) into four subpopulations : cells negative to both PNA and Thy-1.1(B-), PNA+cells, Thy-1.1+cells, and cells positive to both reagents(B+). The in vivo transplantation assays indicate that the clonogenic fractions of PNA+cells from out-growths of organoids in primary cultures for three days in complete hormone medium(CHM) are significantly higher than those of cells from other subpopulations derived from cultrues or from intact glands. Extracellular matrix(ECM) is a complex of several proteins that regulated cell function ; its role in cell growth and differentiation and tissue-specific gene expression. It can act as a positive as well as a negative regulator of cellular differentiation depending on the cell type and the genes studied. Regulation by ECM is closely interrelated with the action of other regulators of cellular function, such as growth factors and hormones. Matrigel supports the growth and development of several different multicellular colonies from mammary organoids and from monodispersed epithelial cells in culture. Several types of colonies are observed including stellate colonies, duct-like structures, two- and three-dimensional web structures, squamous organoids, and lobulo-duct colonies. Organoids have the greatest proliferative potential and formation of multi-cellular structures. Phase contrast micrographs demonstrate extensive intracellular lipid accumulation within the web structures and some of duct-like colonies. At the immunocytochemical and electron micrograph level, casein proteins are predominantly localized near the apical surface of the cells or in the lumen of duct-like or lobulo-duct colonies. Squamous colonies are comprised of several layers of squamous epithelium surrounding keratin pearls as is typical fo squamous metaplasia(SM). All-trans retinoic acid(RA) inhibits the growth of SM. The frequency of lobulo-ductal colony formation increased with the augmentation of RA concentration in these culture conditions. The current study models could provide powerful tools not only for understanding cell growth and differentiation of epithelial cells, but also for the isolation and characterization of mammary clonogenic stem cells.