• The Journal of Pediatrics of Korean Medicine
• /
• v.38 no.1
• /
• pp.10-22
• /
• 2024

Objectives This bibliometric analysis aimed to determine the status of pediatric acupuncture research. Methods Relevant bibliographic information up to January 9, 2024, was collected through searches in the Web of Science Core Collection. Bibliographic information was preprocessed for data analysis and analyzed using VOSviewer software. Network maps of the authors and their affiliated institutions in the included studies were constructed and visualized, and clusters for each major node were identified. In addition, the latest research keywords were visualized using an overlay visualization function. Results The field of pediatric acupuncture research has shown a 20.5-fold quantitative increase in the number of publications over the past 30 years (1991 - 2023). In the field of pediatric acupuncture research, the United States has the highest productivity and influence, and South Korea ranked 7th in productivity and 10th in influence. Through keyword analysis in the field of pediatric acupuncture research, four clusters were identified. Pain management, use in pediatric oncology, and use in postoperative management were identified as important clinical topics. There is a lack of exchange among researchers in the field of pediatric acupuncture. Conclusions Pediatric acupuncture research continues to show quantitative growth and western countries have shown high productivity and influence in this field. In this study, the major keywords in the field of pediatric acupuncture research were identified, and the results can be used to establish the research direction of the Korean medicine community.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.377-389
• /
• 2001

It has a tendency to build Workflow Systems based on the web with the spread of web environment. The important function in Workflow Systems are to automatize job flow according to the predefined regulations, procedures or conditions. Hence, there needs to consider excluding passive jobs, supporting GUI and a migratory information processing for information flow. Distributed Workflow System for workflow of a distributed service system should perform transfer control and Fault-Tolerance between tasks based on process logic, and real time processing. However, the existing mail systems being used are just for transmission and it doesn't fit to automatize job flow. To solve the matter, there needs a Distributed Workflow Engine to design workflow and automatize its control. In this paper, we design a web browser with graphic interface using web mail, a browser creating a script code for a procedural performance. Also, we design a Process-engine has a Preprocessor which tolerates process scheduler for task transaction or server node's faults on distributed environment. The proposed system enhances the reliability and usability of a system reduces the cost rather than a workflow system based on database, for they execute as proxy for a server's fault or suers' absence.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.73-85
• /
• 2013

This study examines the online social capital of local press using the website and social media. Moreover, the paper respectively visualizes web feature as Web 1.0 and social feature analysis as Web 2.0 by applying correspondence analysis. For data, the study analyzes 10 representative local press in Yeungnam areas. To collect the data, two coders coded web features from the websites and we employed NodeXL, an open-source software tool, for social media data. The results reveal that local websites expend online social capital using social media account. Especially, the social features of local presses attach importance to Twitter as the main press keep the well-balance use among all platforms.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.5
• /
• pp.354-365
• /
• 2015

This work presents an Internet of Things (IoT) system for home energy management based on a custom-designed Impulse Radio Ultra-Wideband (IR-UWB) transceiver that targets a generic and multi-standard control system. This control system enables the interoperability of heterogeneous devices: it integrates various sensor nodes based on ZigBee, EnOcean and UWB in the same middleware by utilizing an ad-hoc layer as an interface between the hardware and software. The paper presents as a first the design of the IR-UWB transceiver for a portable sensor node integrated with the middleware layer, and also describes the receiver connected to the control system. The custom-designed low-power transmitter on the sensor node is fabricated with 130 nm CMOS technology. It generates a signal with a 1.1 ns pulse width while consuming $39{\mu}W$ at 1 Mbps. The UWB sensor node with a temperature measurement capability consumes 5.31 mW, which is lower than the power level of state-of-the-art solutions for smart-home applications. The UWB hardware and software layers necessary to interface with the control system are verified in over-the-air measurements in an actual office environment. With the implementation of the presented sensor node and its integration in the energy management system, we demonstrate achievement of the broad flexibility demanded for IoT.

• Journal of Korea Multimedia Society
• /
• v.7 no.2
• /
• pp.187-193
• /
• 2004

Wireless networks play a very important role in communications today. For example, wireless networks today provide from the basic services like e-mail and FTP to the multimedia applications like Web service. It is obvious that QoS requirements to these diverse applications over wireless networks will continue as in wired networks. Much research has been done to develop QoS supporting algorithms on Internet. But due to the limited bandwidth and varying channel states of the wireless networks, it is difficult to support differentiated service over wireless networks. In this paper we propose the modified wireless token ring protocol supporting QoS to the real-time traffic service node over Internet environments in which non-real-time and real-time traffic service nodes coexist. In the proposed algorithm, the real-time traffic service node gets the priority to take token over the non-real-time traffic service node. So the proposed algorithm support quick transmission of the real-time traffic service node. And this advantage can be obtained with minor modification of the legacy wireless token ing protocol to support QoS. We also consider the lost token recovery mechanism.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.648-652
• /
• 2003

In the GPRS(General Packet Radio Service) network, the transport layer between SGSN(Serving GPRS Support Node) and GGSN (Gateway GPRS Support Node) is based on IP-Over ATM Network. which means that the connectionless IP traffic is transmitted through connection oriented ATM transport layer. Efficient resource management is needed to perform connection and disconnection of the pertinent VC because of the connectionless IP traffic being passed through ATM transport layer In this paper, Internet Web service traffic model in the GPRS network is applied to the various VC holding Cost Pricing Model. each method is compared through analyzing each VC utilization and setup rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.858-861
• /
• 2011

In this paper, we present a RFID system by using a wireless sensor network. The proposed system is installed in glove for activity monitoring. The RFID reader, to send data by using sensor network platform and RFID tag are small size, the shape of quadrangle, and operate in the frequency of 13.56 MHz. The sensor node can read RFID tags on the various objects used in daily living such as furniture, medicines, and kitchenwares. The sensor node reads the data of RFID tags, it transmits wireless packets to the sink node. The sink node sends the received packet immediately to a server system. The data from each RFID system is collected into a database, and then the data are processed to visualize the measurement of daily living activities of users. We provide a web-based monitoring system, and can see the number of RFID tag readings per day as bar charts. The result of experiments demonstrates that the way we propose can help to check the situation of life for people who live alone.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.49-56
• /
• 2009

In this paper, we present a daily activity monitoring system by using a wireless sensor network. The proposed system is installed in glove for activity monitoring. The RFID reader, to send data by using sensor network platform and RFID tag are small size, the shape of quadrangle, and operate in the frequency of 13.56 MHz. The sensor node can read RFID tags on the various objects used in daily living such as furniture, medicines, and kitchenwares. The sensor node reads the data of RFID tags, it transmits wireless packets to the sink node. The sink node sends the received packet immediately to a server system. The data from each RFID system is collected into a database, and then the data are processed to visualize the measurement of daily living activities of users. We provide a web-based monitoring system, and can see the number of RFID tag readings per day as bar charts. The result of experiments demonstrates that the way we propose can help to check the situation of life for people who live alone.

• The Journal of Society for e-Business Studies
• /
• v.11 no.1
• /
• pp.1-23
• /
• 2006

As data on the Web is more and more in XML due to proliferation of Web applications such as e-Commerce, it is strongly required to rapidly process XML queries. One of such techniques is XML query caching. For frequently submitted queries, their results could be cached in order to guarantee fast response for the same queries. In this paper, we propose techniques for XML query performance improvement whereby the set of node identifiers(NIS) for an XML query is cached. NIS is most commonly employed as a format of XML query result,, consisting of the identifiers of the XML elements that comprise the query result. With NIS, it is suitable to meet the Web applications data retrieval requirements because reconstruction and/or modification of query results and integration of multiple query results can be efficiently done. Incremental refresh of NIS against its source updates can also be efficiently done. When the query result is requested in XML, however, materialization of NIS is needed by retrieving the source XML elements through their identifiers. In this paper, we consider three different types of NISs. proposing the algorithms of their creation, materialization, and incremental refresh. All of them were implemented using an RDBMS. Through a detailed set of performance experiments, we showed the efficiency of the proposed XML query caching techniques.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.43-53
• /
• 2019

In recent years, there have been many cases of damage to indoor air hazardous materials, and major damage due to the lack of quick action. In this regard, the system is intended to establish for sending push messages to the user's mobile when the concentration of hazardous substances is exceeded. This system extracts data with IoT system such as Arduino and Raspberry Pi and then constructs database through MongoDB and MySQL in cloud computing system. The database is imported through the application server using NodeJS and sent to the application for visualization. Also, when receiving signals about a dangerous situation in IoT system, push message is sent using Google FCM library. Mobile application is developed using Android Web view, and page to enter Web view is developed using HTML5 (HTML, Javascript CSS). The application of this system enables real-time monitoring of indoor air-dangerous substances. In addition, real-time information on indoor/outdoor detection location and concentration can be sent to the user's mobile in case of a risk situation, which can be expected to help the user respond quickly.