• 제목/요약/키워드: weathering properties

검색결과 323건 처리시간 0.023초

Weathering and Degradation Assessment of Rock Properties at the West Stone Pagoda, Gameunsaji Temple Site, Korea

  • Lee, Chan Hee;Lee, Myeong Seong;Kim, Jiyoung
    • Conservation and Restoration of Cultural Heritage
    • /
    • 제1권1호
    • /
    • pp.29-37
    • /
    • 2012
  • The West Stone Pagoda at Gameunsaji Temple Site constructed in the 7th century is mainly composed of dark grey dacitic tuff bearing small numerous dioritic xenoliths. These xenoliths resulted in small holes due to differential weathering process from the host rocks. Physical strength of the pagoda was decreased due to weathering and damage caused by petrological, biological and coastal environmental factors. The southeastern part of the pagoda was extremely deteriorated that the rock surface showed exfoliation, fracture, open cavity, granular decomposition of minerals and salt crystallization by seawater spray from the eastern coast. The stone blocks were intersected by numerous cracks and contaminated by subsequent material such as cement mortar and iron plates. Also, the pagoda was colonized by algae, fungi, lichen and bryophytes on the roof rock surface and the gaps between the blocks. As a result of ultrasonic test, the rock materials fell under Highly Weathered Grade (HW) or Completely Weathered Grade (CW). Thus, conservational intervention is essentially required to prevent further weakening of the rock materials.

투명방음판의 품질기준 설정에 관한 연구(2) - 음향 특성 및 내후성 평가 (Study on Quality Criteria for Transparent Soundproof Panels(2) - Sound Insulation Characteristics and Evaluation of Weatherability)

  • 장태순;김철환;황철호
    • 한국소음진동공학회논문집
    • /
    • 제22권11호
    • /
    • pp.1099-1105
    • /
    • 2012
  • Transparent noise barrier panels have the advantages of transmitting light to nearby residents and allowing drivers to orientate themselves by providing views of the surrounding area. To develop guidelines on quality criteria for transparent soundproof panels, their sound transmission loss and weatherability were experimentally investigated. In Korea, the sound transmission loss of noise barrier panels should be more than 25 dB at 500 Hz and 30 dB at 1000 Hz. The transmission loss tests of transparent panels were performed in accordance with KS F 2808. Typically, plastic materials suffer from color changes when exposed to ultraviolet(UV) light over extended periods. Therefore, weathering of plastics is one of the most important properties for outdoor applications. Protection against UV radiation and weathering is usually accomplished by using UV stabilizer additives or coatings. Transparent materials for soundproof panels were examined through accelerated weathering tests and their weathering resistances were evaluated from changes in yellowness index.

The Influence of Weathering Conditions on the Outer Membrane of Biogas with Plasticized PVC : A Study using Non-destructive Tests

  • Kim, Changhwan;Ki, Wootae;Kim, SangMyung;Shin, Jinyong
    • 한국표면공학회지
    • /
    • 제47권2호
    • /
    • pp.57-62
    • /
    • 2014
  • The biogas holder is composed of an outer membrane and an inner membrane which are subject to outdoor exposure and gas exposure respectively. The influence of weathering conditions on the photo-degradation of a biogas holder was investigated. Tests were performed under three different methods - outdoor exposure tests (Seosan, Arizona), accelerated tests (Xenon-are lamp) with the outer-membrane of biogas. Moreover, the changes in the aging process were monitored using color difference, gloss, the contact angle and an optical microscope. Changes in physical properties, such as decrease reduction in gloss, decrease in the contact angle, increase in color difference were observed in the aging process. The comparison between membrane 3B, 4B and membrane 5B under xenon-arc were discussed. Membrane 5B was very sensitive to ultraviolet (UV) ray. There were many difficulties in the outdoor exposure test due to acid rain, dust, and stain resistance.

강릉 심곡 해안에 발달한 타포니의 물리·화학적 특성에 기초한 풍화 진행 양상 (An Aspect of Weathering Progress Based on Physical and Chemical Properties of Tafoni in the Simgok Area of Gangneung, Korea)

  • 김유정;김종연;김종욱;한민
    • 한국지형학회지
    • /
    • 제25권3호
    • /
    • pp.19-42
    • /
    • 2018
  • In this study, we surveyed weathering progressing aspect by major elements variation and rock hardness by using XRF analysis, schmidt hammer, and thin section analysis. This observation suggested that the weathering process is likely to develop differently according to microstructural characteristics. R-value on the inside wall are lower than those on the outside. Also, the shadier the environment was, the closer it was to inshore areas, the R-value appeared to be lower. The movement of the elements such as Ca, Na and K shows that feldspar is hydrolyzed and can form salt crystallization like a gypsum or halite when they combine with the elements such as S or Cl. It proved a high CaO, $Na_2O$ and $K_2O$ content on flaking inside wall and rock meal. The exfoliation was mainly observed along the shady backwall and ceiling of tafoni. This helped in predicting the growth of tafoni as well as the direction of its progress.

독도 암석의 역학적 특성에 관한 연구 (Mechanical Properties of Rocks in Dokdo)

  • 박찬;정용복;송원경;선우춘;김복철;천대성
    • 터널과지하공간
    • /
    • 제18권1호
    • /
    • pp.69-79
    • /
    • 2008
  • 독도는 약 $300{\sim}220$만 년 전에 형성된 해양섬 기원의 화산체로서 동도와 서도로 구성되어 있다. 비록 규모는 작지만 동해의 형성 및 진화와 연관된 지질과학적 중요성 외에 자원적, 생태적, 영토적 가치, 그리고 일본과의 독도 영유권 문제와 관련한 국민적 관심 등 경제 사회 과학 기술적 측면에서 무한한 잠재적 가치와 의미를 갖고 있는 지역이다. 최근 동도 육상부에서 급속하게 진행되고 있는 풍화 및 침식작용으로 인한 각종 균열로 인하여 독도 지반의 안정성 평가의 필요성이 제기되었다. 본 논문은 독도의 지반안정성 분석을 위한 사전조사단계로서 독도의 지질과 층서, 지반불안정을 발생시키는 요인에 대하여 알아보고 육안관찰에 의해 위험요소로 판단된 지역에서 수행되었던 독도 암석의 역학적 특성을 분석하였다. 독도의 암석은 주로 응회암, 조면암, 조면안산암으로 구성되어 있으며, 전체적으로 풍화와 침식에 의해 국내 암석의 역학적 물성수치에 비해 상대적으로 낮았다.

Buckling resistance behavior of WGJ420 fire-resistant weathering steel columns under fire

  • Yiran Wu;Xianglin Yu;Yongjiu Shi;Yonglei Xu;Huiyong Ban
    • Steel and Composite Structures
    • /
    • 제47권2호
    • /
    • pp.269-287
    • /
    • 2023
  • The WGJ420 fire-resistant weathering (FRW) steel is developed and manufactured with standard yield strength of 420 MPa at room temperature, which is expected to significantly enhance the performance of steel structures with excellent fire and corrosion resistances, strong seismic capacity, high strength and ductility, good resilience and robustness. In this paper, the mechanical properties of FRW steel plates and buckling behavior of columns are investigated through tests at elevated temperatures. The stress-strain curves, mechanical properties of FRW steel such as modulus of elasticity, proof strength, tensile strength, as well as corresponding reduction factors are obtained and discussed. The recommended constitutive model based on the Ramberg-Osgood relationship, as well as the relevant formulas for mechanical properties are proposed, which provide fundamental mechanical parameters and references. A total of 12 FRW steel welded I-section columns with different slenderness ratios and buckling load ratios are tested under standard fire to understand the global buckling behavior in-depth. The influences of boundary conditions on the buckling failure modes as well as the critical temperatures are also investigated. In addition, the temperature distributions at different sections/locations of the columns are obtained. It is found that the buckling deformation curve can be divided into four stages: initial expansion stage, stable stage, compression stage and failure stage. The fire test results concluded that the residual buckling capacities of FRW steel columns are substantially higher than the conventional steel columns at elevated temperatures. Furthermore, the numerical results show good agreement with the fire test results in terms of the critical temperature and maximum axial elongation. Finally, the critical temperatures between the numerical results and various code/standard curves (GB 51249, Eurocode 3, AS 4100, BS 5950 and AISC) are compared and verified both in the buckling resistance domain and in the temperature domain. It is demonstrated that the FRW steel columns have sufficient safety redundancy for fire resistance when they are designed according to current codes or standards.

이란산 원유의 증발에 따른 풍화율 및 화학적 성상 변화 (Effects of Evaporation on the Weathering Rate and Chemical Composition of Iranian Heavy Crude Oil)

  • 김범;김기범;심원준;임운혁
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권3호
    • /
    • pp.238-246
    • /
    • 2012
  • 해양으로 유출된 유류는 다양한 풍화과정을 통해 환경에서 제거되며, 증발이 유출사고 초기에 가장 우세한 풍화과정이다. 본 연구에서는 허베이스피리트호 사고유 중 이란산 원유를 대상으로 실험실에서 표준화된 증발실험을 실시하여 시간에 따른 물리화학적 변화를 관찰하였다. 증발과정에 영향을 미치는 유막두께, 풍속 등의 변수를 제어하여 48시간까지 노출한 결과 $29.3{\pm}0.4%$의 재현성 있는 결과를 산출하였다(n=40, p<0.001). 미국해양대기청의 풍화모델인 ADIOS2를 이용하여 환경조건에서 증발을 시뮬레이션한 결과 29%의 증발율을 구할 수 있었으며, 본 실험과 일치하는 결과를 확인하였다. 증발율에 따른 원유의 조성변화를 분석한 결과 저분자량의 알칸과 PAHs가 제거되었으나, 바이오마커 화합물은 증발에 의한 영향을 받지 않는 보전적인 특성을 나타냈다. 바이오마커 중 $17{\alpha}(H)$, $21{\beta}(H)$-hopane을 이용한 풍화율 계산값은 48시간 최종 값이 24.4%로 물리적인 증발에 따른 양적변화와 유사한 결과를 보였다. 호판을 이용한 풍화율 계산값 비교결과 사고 초기 현장 표착유(1단계 풍화 28.9%)와 메소코즘 풍화 실험 5일차(26.5%)까지는 풍화과정이 주로 증발에 의한 것으로 확인되었다.

전남 나주시 장동리 지역에 노출된 적갈색 점토-실트 퇴적물의 광물 및 지화학적 특성 (Mineralogical and Geochemical Properties of Clay-silt sediments Exposed in Jangdongri, Naju, Korea)

  • 곽태훈;정기영
    • 한국광물학회지
    • /
    • 제30권1호
    • /
    • pp.11-19
    • /
    • 2017
  • 전남 나주시 장동리 지역의 화강암 풍화대를 피복하는 적갈색 점토-실트 퇴적물 단면(~2 m)에 대하여 광물학적 및 지화학적 특성 분석을 실시하였다. 퇴적물은 주로 석영(50%)과 점토광물(45%)로 구성되어 있으며, 소량의 K-장석, 침철석, 적철석, 깁사이트로 구성되어 있다. 점토광물은 일라이트(일라이트, 일라이트-스멕타이트 혼합층), 질석(질석, 수산화-Al 질석), 고령석(캐올리나이트, 할로이사이트) 계열의 점토광물로 구성되어 있다. 광물 및 화학조성의 수직 함량변화는 미미하며, 사장석과 녹니석이 전반적으로 결핍되어 있으나 최상부에 소량 함유되어 있다. 점토광물의 주성분이 일라이트 계열이므로 퇴적물의 기원물질은 주변 고령토질 화강암 풍화물이 아니라, 먼 기원지에서 유래한 풍성퇴적물로 판단된다. 현생 황사의 광물조성과 비교하면, 퇴적 후의 심한 화학적 풍화작용으로 사장석과 K-장석이 거의 없어지고, 석영과 점토광물로 구성된 광물학적 특성을 갖게 되었다. 풍화과정에서 사장석과 녹니석은 각각 고령토 광물과 질석으로 변질되었으며, 함철 유색광물의 풍화과정에서 침철석과 적철석이 침전되어 퇴적물이 적갈색을 띠게 되었다. 이 지역의 적갈색 점토-실트는 한반도 타지역 풍성퇴적물과 광물학적 및 지화학적 특성을 공유하므로 풍성퇴적물로 추정되지만, 이에 대해서는 퇴적물 연대측정이나 동위원소 분석 등의 추가 검증이 필요하다.

포항지역 신생대 제3기 미고결 퇴적층의 암반분류 (Rock Mass Classification of Tertiary Unconsolidated Sedimentary Rocks In Pohang Area)

  • 김성욱;최은경;이융희
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.999-1008
    • /
    • 2009
  • A series of sedimentary rocks which are formed in the Tertiary are distributed around Samcheok(Samcheok-Pukpyoung basin), Younghae(Younghae basin), Pohang(Pohang basin), Gyeongju(Yangnam basin), Ulsan(Ulsan basin), Jeju(Seogyuipo formation) in the southern region of the Korean Peninsula. This study concerned with geological, geophysical, geotechnical properties of the unconsolidated rocks in the Pohang area. A consolidated rocks are classified as hard rock - soft rock - weathered rock - residual soil follows in degree of weathering. But unconsolidated rocks has soil properties as well as rock's at the same time. The results of field excursion, boring, borehole-logging, rock testing, geophysical survey, laboratory test are soft rock range, but the durability of the rock until the residual soil from the weathered rock. We accomplished the rock mass classification of the unconsolidated rocks.

  • PDF

석조문화재의 풍화물성을 고려한 구조보강방법 연구 (A Study on Structural Reinforcement Suitable for the Weathering Properties of Stone Cultural Heritage)

  • 이동식;김현용
    • 보존과학회지
    • /
    • 제31권4호
    • /
    • pp.477-488
    • /
    • 2015
  • 본 연구에서는 석조문화재에 대한 금속보강재의 최소 개입을 통해 원형부재의 이차 훼손을 줄이고, 동시에 최대의 구조보강 효과를 얻을 수 있도록 제안된 실험을 통해 처리기술의 객관적 기준을 다음과 같이 설정하였다. 첫째, 금속보강재의 설계 기준은 석조문화재의 풍화도에 따라 보강재비의 산정이 이루어져한다. 둘째, 석조문화재의 원형이 부분적으로 훼손되어 형태나 구조적으로 보강이 필요할 때 보형처리(구부재 + 신석재 접합)는 풍화등급이 높은 부재를 기준으로 금속보강재 비율을 계획해야 한다. 본 연구를 바탕으로 석조문화재의 구조적인 안정을 꾀할 수 있는 조건을 고려한 금속보강재 비율을 풍화영역별로 제시하면, 접합단면 대비 $800kgf/cm^2$ 이하는 0.13~0.23, $800kgf/cm^2$ 이상 $1200kgf/cm^2$ 이하는 0.24~0.28, $1200kgf/cm^2$ 이상은 0.29~0.5의 금속보강재비를 권장할 수 있다. 특히 더욱 세분화된 풍화등급에 따른 금속보강재의 적용 여부는 석조물의 파괴계수와 금속보강재의 물성을 고려하여야 할 것으로 사료된다.