• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.69-70
• /
• 2017

In Korea, silicone type sealant is widely used for construction site. Before the silicone type, urethane type is one of the main type sealants. However, the weathering property is less than the silicone type, the urethane type is replace by the silicone one. Still the urethane type is used for the inside of the buildings for the perimeter of the window. The silicone type sealants are better in weathering property than those of the urethane type sealants. Except the weathering property urethane type sealant has its own advantage like movement property, low cost and so forth. There are many research results for the outdoor weathering of the sealants, but in Korea there are no results for the outdoor weathering for construction sealants. This research is focused on the outdoor weathering of the urethane sealants, how to measure the degradation, and compare the products which used in Korea. The outdoor weathering test is usually time consuming, thus we designed specialized device for accelerating the result.

• 자원환경지질
• /
• 제32권2호
• /
• pp.203-208
• /
• 1999

The main objective of this study is to suggest a new assessment method of the influence of weathering due to salt crystallization on the engineering property of rock. For this purpose, various sources of salt and salt crystallization were investigated, and artificially accelerated weathering tests were carried out. In natural envionment, weathering rate is very slow and weathering process involves complex mechanisms. Therefore artificial weathering test is essential for systematic analysis. Arificial weathering test is defined as test which controls weathering rate and agents by controlling arificial environmental condition. In this study, salt crystallization test was selected among various artificial weathering test methods, for its important role in weathering. Change of various stone properties were detexted. The change of physical properties by salt crystallization were observed as follows : 72% in Brazilian tensile strength and 72% in Slake durability. These results explain the importance of salt crystallization in the mechanical behaviour and properties of stone.

• 한국광물학회지
• /
• 제11권2호
• /
• pp.97-105
• /
• 1998

Weathering of biotite in Palgonsan granite was studied by using X-ray diffraction, optical microscopy, scanning electron microscopy, and electron probe micro analysis. Biotite altered to biotite/vermiculite regular mixed layer mineral (B/V) in the early stage of weathering. Although partially replaced by kaolinite with the progress of weathering. B/V is the major weathering product of biotite throughout the profile. During the formation of B/V, Mg, Fe and K are removed from a biotite layer to form a vermiculite layer by about 28%, 44% and 88%, respectively, whereas the Ti content is not changed. Considerable volume increase after the kaolinitization of B/V suggests that Al and Si are largely introduced from the external weathering solution. The silicate lattice templet of a weathering biotite facilitated the nucleation and growth of kaolinite. In the Palgongsan granite weathering profile, plagioclase weathered mostly into halloysite whereas biotite greatly contributes to the kaolinite crystallization though its small content in fresh rock.

• 한국지형학회지
• /
• 제23권1호
• /
• pp.1-16
• /
• 2016

This study estimates relationships between physical and chemical weathering indices of various rock types and topographical relief. Physical weathering properties such as rock strength and joint and chemical weathering indices such as the $SiO_2/Al2O_3$, CIA and WPI were analyzed from 18 rock outcrops in mountain and valley areas consisting of 9 rock types. The results indicate that the elevation and relief of topography increase physical strength of rock increases. It can be suggested that the total r(rock-mass strength rating) and R(rock rebound strength by Schmidt Hammer) are most useful indices as a quantitative weathering property factor to explain formative causes of topographical relief. The results also suggest that rock types such as sandstone, granite, gneiss and schist are most suitable to explain meaningful difference in topographical relief with the physical and chemical weathering indices.

• 터널과지하공간
• /
• 제22권1호
• /
• pp.32-42
• /
• 2012

암석에 대한 풍화특성 연구는 시공간적 제약으로 인한 어려움이 따른다. 이 연구는 경상남도 김해시 일대에 분포하는 백악기 화강암에 대하여 물리적 및 화학적 풍화과정을 인공적으로 재현하고 풍화진행에 따른 암석의 지질공학적 특성변화를 고찰하였다. 인공풍화과정에 의하여 시료의 탄성파속도는 현저하게 감소하였으며 공극률 및 흡수율은 뚜렷하게 증가하였다. 초기 풍화등급이 높은 암석일수록 인공풍화과정에 따른 물성변화의 폭이 크며 풍화에 취약한 것으로 나타났다. 공극률, 흡수율 및 탄성파속도는 연구지역의 화강암에 대한 풍화지수로 유용하게 사용할 수 있다. 물리적 및 화학적 풍화과정이 복합적으로 일어나는 조건에서 암석풍화는 더욱 촉진된다. 이 연구에서 복합적인 풍화과정을 재현한 연구방법은 암석의 풍화특성을 규명하고 예측하는 데에 활용할 수 있을 것으로 기대된다.

• 한국지반환경공학회 논문집
• /
• 제17권5호
• /
• pp.17-25
• /
• 2016

지표에 노출되는 암석은 기상작용 등의 영향으로 풍화가 가속되며, 풍화작용은 광물의 성질을 변화시켜 암석의 안정성을 저하시키게 되므로 암석의 풍화에 대한 저항은 광물의 조성을 파악하는 것이 중요하며 이는 풍화 민감도 분석을 통해 이루어진다. 따라서 본 연구에서는 시추된 시료에 대한 현미경 박편 시험을 실시하고 모드분석을 통해 풍화 취약광물의 구성비를 측정하였으며, 이를 통해 대상사면의 암석학적 광물학적 풍화요인을 평가하였다. 또한, X-Ray 회절분석을 이용하여 암석을 구성하는 실제적인 광물조성을 정량적으로 측정하고 주사현미경관찰을 통해 이차광물을 동정하여 풍화의 진행 정도를 파악하였다. 이러한 풍화 민감도 기법을 통하여 풍화 저항도를 판단할 수 있는 적절한 지시자를 결정할 수 있으며 화학적 풍화속도를 이용한 풍화등급의 예측이 가능할 것으로 분석되었다.

• 한국강구조학회 논문집
• /
• 제15권2호
• /
• pp.147-157
• /
• 2003

최소유지관리의 LCC관점에서 강구조물에의 적용이 증가하고 있는 내후성강재를 대상으로 Mill Sheet를 수집하고 이를 통계적으로 분석하여 화학성분, 기계적성질, 용접성지수, Weathering Index 및 충격흡수에너지에 대해 정량적으로 조사하였다. 본 연구결과 국내에서 생산되고 있는 내후성강재의 화학성분, 기계적 성질 및 충격흡수에너지는 분산의 폭이 약간 크게 나타났으며 KS에서 규정하는 기준값을 충분히 만족하고 있는 것으로 나타났다. 또, 용접성지수 및 Weathering Index는 일본 도로교시방서 및 ASTM의 기준을 만족하고 있는 것으로부터 국내 내후성강재의 품질을 확인 할 수 있었다.

• 지질공학
• /
• 제27권4호
• /
• pp.451-462
• /
• 2017

Physical weathering caused by external forces and chemical weathering caused by the decomposition or alteration of constituent materials are the two factors that dominate the mechanical properties of rocks. In this study, a field investigation was undertaken to identify the physical and chemical weathering characteristics of the biotite granite and granitic weathered soils in Gyeongju, South Korea. Samples were collected according to their grade of weathering and subjected to modal analysis, XRD analysis, XRF analysis, physical property tests, particle size distribution tests, and slake durability tests. Modal and XRD analysis identified these rocks as biotite granite; secondary alteration minerals were not observed. Physical property tests and particle size distribution analyses indicate an average porosity of 41.28% and a sand content of > 90 wt.%. These values are somewhat higher than those of granites in general. The results of the slake durability test and XRF analyses show that the physical and chemical weathering indices of the samples vary with the degree of weathering.

• 한국토양비료학회지
• /
• 제47권3호
• /
• pp.179-186
• /
• 2014

Weathering indexes of the typical pedons derived from different parent materials of the soils of Korea were calculated by Kronberg and Nesbitt (1981) to understand weathering degree of the soils which might give a clue of soil formation and characterizing a soil pedon. The weathering index W1 was chemical change index, and the weathering index W2 was silicate dominant index. The chemical compositions of the 49 typic pedons were extracted from the Taxonomical Classification of Korean Soils (NIAST, 1999). The weathering indexes of Kimhae series, derived from fluvio marine material, were the highest among the analyzed soils. Within parent materials, the weathering indexes of the soils derived from limestones parent materials were high, and those derived from phorphyry materials were low. The relationship between W1 and W2 showed unique pattern which implied certain sequence within the same parent materials.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.383-389
• /
• 2022

Natural(outdoor) and accelerated(artificial) weathering tests were performed to investigate their influence on polycarbonate. The polycarbonate materials were prepared of various formulations divided into three batches, with existing, development materials1, development materials2, containing mixture of UV additives. Weathering tests were carried out as outdoor weathering(Seosan, South Korea) and accelerated weathering(xenon-arc), and the results analysis were evaluated based on yellow-index(YI), scanning electron microscope(SEM/EDS), energy dispersive x-ray spectroscopy(XRD), and gel permeation chromatography(GPC). Among the three materials, processing method development materials1 with UV stabilizer was excellent in weathering. This study can provide basic data for standardization of development and performance evaluation on livestock barn roof.