• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.351.1-351.1
• /
• 2016

While conventional electronic devices have been fabricated on the rigid and brittle Si based wafer as a semiconducting substrate, future devices are increasingly finding applications where flexibility and stretchability are further integrated to enable emerging and wearable devices. To achieve high flexibility and stretchability, various approaches are investigated such as polymer based conducting composite, thin metal films on the polymer substrate, and structural modifications for stretchable electronics. In spite of many efforts, it is still a challenge to identify a solution that offers both high stretchability and superior electrical properties. In this paper, we introduce a highly stretchable entangled-mesh graphene showing a potential to address such requirements as stretchability and good electrical performance. Entangle-mesh graphene was synthesized by CVD graphene on the Cu foil. To analyze the mechanical properties of entangled-mesh graphene, endurance and stretching tester have been used.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1751-1768
• /
• 2011

Falls are one of the most concerned accidents for elderly people and often result in serious physical and psychological consequences. Many researchers have studied fall detection techniques in various domain, however none released to a commercial product satisfying user requirements. We present a systematic modeling and evaluating procedure for best classification performance and then do experiments for comparing the performance of six procedures to get a statistical classifier based wrist-type fall detector to prevent dangerous consequences from falls. Even though the wrist may be the most difficult measurement location on the body to discern a fall event, the proposed feature deduction process and fall classification procedures shows positive results by using data sets of fall and general activity as two classes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.29-29
• /
• 2008

Realization of electronics with performance equal to established technologies that use rigid semiconductor wafers, but in lightweight, foldable and stretchable formats would enable many new application possibilities. Examples include wearable systems for personal health monitoring, 'smart' surgical gloves with integrated electronics and electronic eye type imagers that incorporate focal plane arrays on hemispherical substrates. Circuits that use organic or certain classes of inorganic electronic materials on plastic or steel foil substrates can provide some degree of mechanical flexibility, but they cannot be folded or stretched. Also, with few exceptions such systems offer only modest electrical performance. In this talk, I will present a new approach to high performance, flexible and stretchable integrated circuits. These systems combine single-crystal silicon nanoribbons with thin plastic or elastomeric substrates using both "top-down" and "transfer-printing" technologies. The strategies represent promising routes to high performance, flexible and stretchable optoelectronic devices that can incorporate established, high performance inorganic electronic materials.

• Electronics and Telecommunications Trends
• /
• v.36 no.1
• /
• pp.32-42
• /
• 2021

Innovative developments in wearable and artificial intelligence technologies are accelerating the emergence of a soft suit that can autonomously augment a body's own strength and protect the human body. In this paper, we define the concept of "Exoskin," a new concept specifically derived from the "Road to an Intelligent Information Society" (Technology Development Map 2035) as predicted by the Electronics and Telecommunications Research Institute. In addition, we analyze the development status of each element of this technology and forecast its future development.

• Annual Conference of KIPS
• /
• 2024.05a
• /
• pp.548-549
• /
• 2024

본 연구는 웨어러블 디바이스 보조전력으로서 유기태양전지를 사용하기 위한 방안을 제시한다. 유기태양전지의 다층구조에서 광활성층과 금속전극 사이에 버퍼층으로서 PC70BM 층을 삽입함으로써 기대되는 전력변환효율의 향상을 소개한다. 또한 이러한 버퍼층의 두께를 조절하여 이에 대한 효과를 확인한다. 수집된 데이터를 분석하여 최적의 버퍼층 두께를 추출하고 이러한 과정에서 최대 값을 초과한 두께에서 발생하는 전력변환효율 감소 또한 확인할 수 있다.

• Vacuum Magazine
• /
• v.3 no.2
• /
• pp.17-20
• /
• 2016

Piezoelectric nanogenerators are energy harvesting device to convert a mechanical energy into an electric energy using nanostructured piezoelectric materials. This review summarizes works to date on piezoelectric nanogenerators, starting with a basic theory of piezoelectricity and working mechanism, and moving through the reports of numerous nanogenerators using nanorod arrays, flexible substrates and alternative materials. A sufficient power generated from nanogenerators suggests feasible applications for either power supplies or strain sensors of highly integratedl nano devices. Further development of nanogenerators holds promise for the development of self-powered implantable and wearable electronics.

• Journal of Sensor Science and Technology
• /
• v.21 no.4
• /
• pp.241-248
• /
• 2012

Recently healthcare industry such as pharmaceutical, medical device and healthcare service technology is growing significantly. Mobile healthcare has attracted big attention due to IT convergence technology. Paradigm of healthcare has been changed from the 1st generation(communicable disease prevention) and the 2nd generation(treatment of disease due to extended life expectancy) to the 3rd generation(extended life expectancy due to prevention and control). In our study, we suggest the 3rd generation mobile healthcare system using Bluetooth based wearable ECG monitoring system and smart phone technology. The mobile healthcare system consists of wearable shirts with Bluetooth communication module, ECG sensor, battery, and mobile phone. The ECG data is obtained by a miniaturized sensor and the data is transferred to a mobile phone using Bluetooth communication. Then, user can monitor his/her own ECG signal on an application using Android in mobile phone. The Bluetooth communication device is used due to highly reliable data transmission property and the Bluetooth chip is embedded in every mobile phone. The wearable shirts with chest belt of Bluetooth ECG module is designed with a focus on convenience in the daily life of a wearer. The ECG signal evaluation software in Android based mobile phone is developed for the health check and the ECG signal variation is tested according to the activities of the wearer such as walking, climbing stairs, stand up and sit down, and so on.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.198-204
• /
• 2019

In this study, we propose a wearable force sensor using 3D printed mold and liquid metal. Liquid metal, such as Galinstan, is one of the promising functional materials in stretchable electronics known for its intrinsic mechanical and electronic properties. The proposed soft force sensor measures the external force by the resistance change caused by the cross-sectional area change. Fused deposition modeling-based 3D printing is a simple and cost-effective fabrication of resilient elastomers using liquid metal. Using a 3D printed microchannel mold, 3D multichannel Galinstan microchannels were fabricated with a serpentine structure for signal stability because it is important to maintain the sensitivity of the sensor even in various mechanical deformations. We performed various electro-mechanical tests for performance characterization and verified the signal stability while stretching and bending. The proposed sensor exhibited good signal stability under 100% longitudinal strain, and the resistance change ranged within 5% of the initial value. We attached the proposed sensor on the finger joint and evaluated the signal change during various finger movements and the application of external forces.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.270-280
• /
• 2007

In Linux, real-time tasks are supported by separating real-time task priorities from non-real-time task priorities. However, this separation of priority ranges may not be effective when real-time tasks make the system calls that are taken care of by the kernel threads. Thus, Linux is considered a soft real-time system. Moreover, kernel threads are configured to have static priorities for throughputs. The static assignment of priorities to kernel threads causes trouble for real-time tasks when real-time tasks require kernel threads to be invoked to handle the system calls because kernel threads do not discriminate between real-time and non-real-time tasks. We present a dynamic kernel thread scheduling mechanism with weighted average priority inheritance protocol (PIP), a variation of the PIP. The scheduling algorithm assigns proper priorities to kernel threads at runtime by monitoring the activities of user-level real-time tasks. Experimental results show that the algorithms can greatly improve the unexpected execution latency of real-time tasks.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2016

Nowadays, the importance of role of the international standardization keeps increasing substantially. We have already known that international standards have a huge impact on many companies, industries and nations. So far, it has been thought that standardizations are needed after the new products come into the market and are mass-produced in order to encourage the use of the products, systems and services. Standardization will make the products more safe, efficient, and environmentally friendly for the users. However, in these days, a paradigm of the standardization has been changed. International standard becomes a tool for dominating global market and is the most important ingredients of the competitiveness and economic progress of the nation and enterprises. Many countries like Japan, Germany and U.S. use the standardization as an effective method to dominate the market and monopolized the new technologies. Therefore, worldwide competition for the standardization of the new technology become fierce. Korea is leading the technology in semiconductor field. However, activities of international standardization are not sufficient. In order to boost the standardization activities in Korea from industry, academia, and research institute, this paper briefly introduce the international standard organization and some critical issues for next-generation semiconductor memory such as flexible semiconductor, automobile semiconductor and wearable devices.