• 제목/요약/키워드: weak thin layer

검색결과 43건 처리시간 0.021초

2종 천남성(天南星)의 외부(外部) 및 내부형태(內部形態)에 대한 연구 (The external and internal morphological standard of original plants and herbal states in 2 kinds of Arisaematis Rhizoma)

  • 강준혁;윤주봉;주영승
    • 대한한의학방제학회지
    • /
    • 제11권2호
    • /
    • pp.213-232
    • /
    • 2003
  • Objectives : This study was designed to establish a characteristic discrimination of internal and external morphological standard of original plants and herbal states in Arisaema amurense var. serratum $N_{AKAI}$ and A. amurense $M_{AXIM}.$. Methods : In this studies, the external-internal morphological standards were determined by using stereoscope and butanol series. Results : 1. In the external shape of original plant, Arisaema amurense var. serratum $N_{AKAI}$ has high stem, an oval-elliptic leaflet and a serrate leaf margin. But A. amurense $M_{AXIM}$ has a relatively low stem, an upside oval leaflet and no serrate leaf margin. 2. On the herbs character of original plant, Arisaema amurense var. serratum $N_{AKAI}$ is small in height and diameter, but A. amurense $M_{AXIM}$ is relatively large in height and diameter. 3. On the gathered herbs character of original plant, the section of Arisaema amurense var. serratum $N_{AKAI}$ is brightly white, easily spilt and strong scent. But the section of A. amurense $M_{AXIM}$ is thin yellowish brown, not easily spilt and weak scent. Also the grade of gathered herbs, both can be classified by diameter and external scent. 4. In the current herbs character, Korean and Sichuan Province products are irregullar shape and have no scent, Jilin Province products are regular shape. Also, Guangxi Province products are small size and concave in one side, Hebei Province products are irregular size and shape. 5. In internal shape of original plant, epidermal cell of Arisaema amurense var. serratum is very tight. With the except of micro difference in parenchyma cell of cortex, on the whole there are nearly no differences with A. amurense $M_{AXIM}.$ Also, samely in the internal shape, according to collecting sites, epidermis exhibits a lot layer in curving state and secreting duct is developed and vascular bundle and exists between parenchyma cell of cortex. Conclusion : In the future, additional study is needed to distinguish herb and effect between same genus-degree of relatedness.

  • PDF

수종 상아질 접착제의 결합강도와 중합률에 관한 연구 (A STUDY ON BONE STRENGTH AND THE DEGREE OF CONVERSION OF DENTIN BONDING AGENTS)

  • 김병현;권혁춘
    • Restorative Dentistry and Endodontics
    • /
    • 제23권1호
    • /
    • pp.68-93
    • /
    • 1998
  • The physical properties of polymer are greatly influenced by the extent to which a resin cures. The presence of un reacted monomer can, have a plasticizing effect on the polymer, thereby altering the physical and mechanical properties of dentin bonding agent (DBA). If the DBA does not polymerize sufficiently, it will leave a weak bonding layer and lead to lower bond strength. The purpose of this study was to evaluate the shear bond strengths(SBS) and the degree of conversion (DC) of 4 commercialy avilable dentin bonding systems which are composed of 2 multi-bottle systems [Scotchbond Multi-Purpose (SMP), AeliteBond(AB)] and 2 onebottle systems [SingleBond(SB), One-Step(OS)]. For shear bond strength measurement, labial surfaces of freshly extracted bovine incisors were ground with # 600 grit SiC paper to expose dentin. Four different groups of samples were formed, with 10 samples. being made for each of the 4 commercial DBA in each group according to the curing sequences of DBA and overlayer thickness of composites: Group I (standard cure and 1mm thick composites) : The DBA was light cured and the composites of 1mm thickness was applied ; Group II (standard cure and 2mm thick composites) : The DBA was light cured and the composites of 2mm thickness was applied; Group III (simultaneous cure and 1mm thick composites) : The DBA was not light-cured and simultaneously cured with composites of 1mm thickness; Group N (simultaneous cure and 2mm thick composites) : The DBA was. not light-cured and simultaneously cured with composites of 2mm thickness. The SBS was measured immediately after the composites was bonded to the bovine dentin using an Instron machine. The DC of the DBA was examined in a thin film under simulated conditions of the experimental groups according to the curing sequences and overlayer thickness of composites in the SBS test. using a Fourier transform Infrared(FTIR) spectrometer. The following results were obtained from SBS tests and DC measurements 1. In SBS tests, the multi-bottle DBA(SMP, AB) had a generally higher bond strength values than the one bottle DBA(SB, OS). In DC measurements, the one bottle DBA(SB, OS) had a significantly higher DC than the multi-bottle DBA(SMP, AB). 2. In all DBAs except OS, there was no significant difference between the bond strength of group I (standard cure and 1mm thick composites) and that of group III (simultaneous cure and 1mm thick composites). SMP, SB in Group I had a significantly higher DC than those in group III, but AB, OS in group I had a significantly lower DC than those in group III 3. All DBAs in Goup II (standard cure and 2mm thick composites) had significantly higher bond strength and DC than those in Group N (simultaneous cure and 2mm thick composites). 4. In all DBAs, there was no significantly different SBS and DC between Group I and Group II, but all DBAs in Group III had significantly higher SBS and DC than those in Group IV.

  • PDF

컴포머와 유치 상아질의 결합에 관한 연구 (A STUDY ON THE BONDING OF COMPOMER TO DECIDUOUS DENTIN)

  • 김지태;김용기;김종수;권순원
    • 대한소아치과학회지
    • /
    • 제29권4호
    • /
    • pp.509-518
    • /
    • 2002
  • 치과 임상에서 널리 사용되고 있는 대표적인 심미성 접착 수복재료인 복합 레진과 글라스 아이어노머 시멘트의 단점을 보완하여 개발된 것으로 알려진 컴포머의 유치 상아질에 대한 결합력을 평가하고자 본 실험을 수행하였다. 치아 교환을 이유로 최근에 발거된 유구치 144개를 실험대상 치아로 선정하였으며, 이 중 120개의 치아는 전단강도 측정실험을 위하여 나머지 24개는 결합계면의 주사전자 현미경 관찰을 위해 무작위로 배분하였다. 각 치아마다 $3{\times}4mm$의 상아질을 노출시킨 후 내경 2.6mm, 높이 2.0mm의 크기로 제작된 폴리에틸렌 주형을 상아질 표면에 고정시킨 다음 각각의 재료를 설정 조건에 따라 충전하였다. 전단강도 실험표본은 만능 시험기를 사용하여 측정하였으며, 주사 전자현미경 관찰 표본 중 1/2은 다시 근원심으로 절단하여 그 결합계면을 관찰하였으며 나머지 1/2은 치아를 완전 탈회시킨 후 상아질 내에 침투된 접착제의 형태를 관찰하였다. 본 실험의 결과 모든 컴포머 군($II{\sim}V$)의 전단강도가 글라스 아이어노머 군(I)보다 높게 나타났고, 산 부식을 시행한 컴포머 군(III, V)이 산 부식을 시행하지 않고 충전한 컴포머 군(II, IV)에 비해 높은 전단강도를 보였으며(p<.05) 복합 레진 군(VI)과의 비교에서도 통계학적인 유의차가 없었다(p>.05). 서로 다른 접착제를 사용한 컴포머군 간의 비교에서는 모두 유의차가 나타나지 않았다. 상아질-수복재 계면의 관찰 결과, 산 부식 처리된 상아질과 결합된 컴포머 군이 처리하지 않은 군에 비해 다소 두꺼운 혼화층이 균일하게 형성되어 있었고 레진 돌기도 더욱 치밀하게 침투한 양상을 보였다. 주사 현미경 관찰에서는 산부식 하지 않은 컴포머 군이 전반적으로 짧고 얇은 레진 태그가 불규칙하게 분포되어 있는 양상을 보인 반면, 산부식을 시행한 군과 복합 레진 군에서는 굵고 긴 레진 태그들이 규칙적이며 치밀한 분포를 나타냈다. 이상의 결과로 미루어 상아질의 산 부식 과정이 컴포머의 결합력 증진에 긍정적 요인으로 작용한 반면 상아질 접착제의 종류는 별다른 영향을 주지 않은 것으로 분석되었다. 결합강도의 비교에서 컴포머가 글라스 아이어노머에 비해 우수한 것으로 평가되어 소아 환자의 유구치 심미 수복재료로서의 가능성이 입증되었다.

  • PDF