• Journal of Advanced Marine Engineering and Technology
• /
• 제39권1호
• /
• pp.63-67
• /
• 2015

백색 발광 다이오드는 조명과 통신이 동시에 가능하여 많은 주목을 받고 있다. 본 논문에서는 고출력 백색 LED와 저가형 광 다이오드, 프레넬 렌즈로 구성된 가시광 통신의 특성을 연구하였다. LED 구동회로는 고전력 MOSFET과 MOSFET 전용 구동칩을 사용하여 LED가 고속으로 온오프 되게 스위칭 하였다. 사용한 LED의 대역폭은 8 MHz로 측정되었다. 그러나 실내 조명환경을 고려한 500 lx 조도 하에서 통신 속도는 PIN 광 다이오드인 SFH213의 낮은 스펙트럼 감도와 낮은 신호전력으로 인해 1 Mbps까지만 가능하였다. 시스템 대역폭을 확장하기 위하여 프레넬 렌즈를 적용한 경우 수신단의 PIN 광 다이오드에 LED의 집광된 광 전력이 입사되도록 하여 LED의 대역폭까지 변조될 수 있었다. 프레넬 렌즈에 의한 신호대 잡음비는 40 dB 이상 향상되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권5호
• /
• pp.71-85
• /
• 1993

The Cycloconverter that the author is going to treat in this paper, has strong advantages over the D.C. Link Inverter in points of chattering torque problem and natural commutation. Thus, the Cycloconverter is expected to be well applied to large and low-speed machines which require better speed control at low frequency. But the control circuit of Cycloconverter has two weak points described as follows. 1) Because of its rather complicated control circuit, it is likely to be illoperating due to unexpected noise signals, thus the higher the accuracy and reliability of the circuit is required to be, the more the circuit may cost. 2) Because the load current is not purely sinusoidal, the Cycloconverter may possibly be destroyed in case of inaccurate convert switching resulted from the difficulties in detecting the load current-zero and the current direction at the moment. In this paper, the author first of all intends to design and build a modified VVVF-type Noncirculating Current Cycloconverter to which recently proposed control methods are applied for improving the circuit simplicity, the control performance, and the system reliability. And then, experiments for observing the output waveforms of the Cycloconverter which is controlled by Singled-Board Computer using 8086 16-bit microprocesser are carried out. Finally the author concludes the result of this study as follows. 1) By replacing the conventional analog control circuits such as Reference Wave Generator, Cosine Timing Wave Generator, and Comparator with softwares, a great circuit simplicity is achieved. 2) The output of the designed Cycloconverter changes its frequency very fast without showing discontinuity of its waveform, and this waveform characteristics enables the smooth speed control of Induction Motor. 3) The design control circuit of Cycloconverter can be applied to the systems of 12 or 24 pulses because of its short processing period.

• 대한수학교육학회지:학교수학
• /
• 제4권2호
• /
• pp.317-331
• /
• 2002

The purpose of this study is to compare the eighth-grade mathematics textbooks of Korea, Japan on the one hand, and those of the United States and England on the other, and to explore the implications for mathematics education in the East and the West. As a result, the dichotomy between the East and the West were set up with the sacrifice of the details. First, the textbook development and publication policies of the East are characterized as uniformity, and those of the West are diversity. Second, for the choice of content, the East and West can be represented by essential and discretionary respectively. Third, the physical appearance of Eastern textbooks is rather plain while that of the Western textbooks is colorful, Fourth, in terms of the characteristics of the content, the dichotomies between the East and the West are linear vs. spiral, content vs. context, formal abidance vs. metacognitive shift, and simple vs. realistic. Each of the Eastern and Western approaches has its own weak points as well as its strong points. For instance, textbooks In the West may help students realize how useful mathematics can be in their lives, but if the link between a mathematical concept and the corresponding real life situation is not made clear, sometimes students may not be able to completely grasp the mathematical concept. In turn, the Eastern textbooks may succeed In conveying ideas in an economical way, but they often fail to motivate students to follow the course. Therefore it is important to take a critical view of each approach. It is through a critical understanding of the differences between different cultures that we are able to learn from each other and to put the results of such comparative studies to better use in the future.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.479-488
• /
• 2016

PURPOSE. The aim of this study was to test the modulus of elasticity (E) across the interfaces of yttria stabilized zirconia (YTZP) / veneer multilayers using nanoindentation. MATERIALS AND METHODS. YTZP core material (KaVo-Everest, Germany) specimens were either coated with a liner (IPS e.max ZirLiner, Ivoclar-Vivadent) (Type-1) or left as-sintered (Type-2) and subsequently veneered with a pressable glass-ceramic (IPS e.max ZirPress, Ivoclar-Vivadent). A $5{\mu}m$ (nominal tip diameter) spherical indenter was used with a UMIS CSIRO 2000 (ASI, Canberra, Australia) nanoindenter system to test E across the exposed and polished interfaces of both specimen types. The multiple point load - partial unload method was used for E determination. All materials used were characterized using Scanning Electron Microscopy (SEM) and X - ray powder diffraction (XRD). E mappings of the areas tested were produced from the nanoindentation data. RESULTS. A significantly (P<.05) lower E value between Type-1 and Type-2 specimens at a distance of $40{\mu}m$ in the veneer material was associated with the liner. XRD and SEM characterization of the zirconia sample showed a fine grained bulk tetragonal phase. IPS e-max ZirPress and IPS e-max ZirLiner materials were characterized as amorphous. CONCLUSION. The liner between the YTZP core and the heat pressed veneer may act as a weak link in this dental multilayer due to its significantly (P<.05) lower E. The present study has shown nanoindentation using spherical indentation and the multiple point load - partial unload method to be reliable predictors of E and useful evaluation tools for layered dental ceramic interfaces.

• 한국지진공학회논문집
• /
• 제3권2호
• /
• pp.9-18
• /
• 1999

현행 내진설계 기준과는 달리 내진설계기준연구(II) 에서는 6층 미만의 건물도 내진설계를 적용하도록 제안하고 있다 이 제안서가 향후 내진설계 기준의 근간이 된다면 저층 건물에 대하여서도 내진설계가 수행되어야 할 것으로 예상된다 지진의 세기로 구분할 때 국내의 약지진동 지역으로 구분되며 이와 같은 지역에서의 저층 건물의 초과강도 계수 $\Omega$는 매우 크다고 기조의 연구자들이 보고하고 있다 따라서 본 연구에서는 국내 4층 RC 모멘트 연성 골조의 경우에$\Omega$를 고찰하고자 스팬과 경간(bay)를 변화시키면서 모델을 설계하고 이를 2차원 push-over 해석하였다 수치해석 결과 경간의 수 또는 스팬 길이가 증가함에 따라$\Omega$의 값이 증가하는 추세를 보였다 이는 내진설계시 우발 비틀림 모멘트를 고려함으로 스팬 길이 또는 경간 수의 증가에 비하여 외부기중의 설계강도증가율이 크기 때문이다 또한 외부 기둥의 강도증가는 강기동-약보 모델에 근접한 붕괴기구를 형성하므로 $\Omega$의 증가에 영향을 미치는 것으로 고찰되었다

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1365-1375
• /
• 2009

The types and quantities of Hazmat and Hazmat transport are gradually increasing, keeping pace with industrialization and urbanization. There are currently more than 1,000 types of Hazmat,, and new types are added every year. At present the safety management for Hazmat transport only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Based on this principle, in turn., the methods to reduce risk (Risk=Probability$\times$Consequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method was invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management in transporting Hazmat on railway industries was suggested. The 7-step risk management is definded as the following: 1st step: buliding up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP. In conclusion., those 7 steps are recommended as a standardization method in this study.

• Genomics & Informatics
• /
• 제9권2호
• /
• pp.59-63
• /
• 2011

Obesity provokes many serious human diseases, including various cardiovascular diseases and diabetes. Body mass index (BMI) is a highly heritable trait that is broadly used to diagnose obesity. To identify genetic loci associated with obesity in Asians, we conducted a genome-wide association study (GWAS) of a population of Korean adults (n=6,742, age 40~60 years) and detected six BMI risk loci (TNR, FAM124B, RGS12, NFE2L3, MC4R and FTO) having p< $1{\times}10^{-5}$. However, in the replication study, only melanocortin 4 receptor gene (MC4R) (rs9946888, p=$4.58{\times}10^{-7}$) was replicated with marginal significance (p<0.05) in the second cohort (n=5,102, age 40~60 years). This study indicates that each locus associated with BMI has very weak genetic effect.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.881-886
• /
• 2010

A novel Schiff base N-(2,4-dinitro-phenyl)-N'-(1-phenyl-ethylidene)-hydrazine has been synthesized and structurally characterized by X-ray single crystal diffraction, elemental analysis, IR spectra and UV-vis spectrum. The crystal belongs to monoclinic with space group P21/n. The molecules are connected via intermolecular O-$H{\cdots}O$ hydrogen bonds into 1D infinite chains. The crystal structure is consolidated by the intramolecular N-$H{\cdots}O$ hydrogen bonds. weak intermolecular C-$H{\cdots}O$ hydrogen bonds link the molecules into intriguing 3D framework. Furthermore, Density functional theory (DFT) calculations of the structure, stabilities, orbital energies, composition characteristics of some frontier molecular orbitals and Mulliken charge distributions of the title compound were performed by means of Gaussian 03W package and taking B3LYP/6-31G(d) basis set. The time-dependent DFT calculations have been employed to calculate the electronic spectrum of the title compound, and the UV-vis spectra has been discussed on this basis. The results show that DFT method at B3LYP/6-31G(d) level can well reproduce the structure of the title compound.

• 한국항공우주학회지
• /
• 제45권5호
• /
• pp.409-416
• /
• 2017

공중의 비행체에 필요한 정보를 전달하는 광대역 송신시스템은 근거리에서 동시에 운용될 수 있도록 다수의 부채널 주파수를 확보하고 있다. 취약한 외부환경에 노출되는 송신기의 경우, 시스템의 신뢰성을 높이기 위하여 안테나를 포함하여 다른 내부의 하위 구성품들의 자체고장진단을 할 수 있도록 설계되어야 한다. 안테나 자체고장진단은 보통의 경우 안테나 반사세기를 기준으로 판정 내리는데, 증폭단과 안테나가 긴 길이의 케이블로 연결될 경우는 안테나 반사세기가 주파수마다 많은 차이가 발생된다. 본 논문에서는 증폭단과 안테나의 연결에 사용되는 케이블 길이에 따라 안테나 반사세기가 주기성을 갖는 현상을 이론적으로 살펴보고, 반사세기 반복주기를 기반으로 점검주파수 범위설정, 다수 주파수 설정 점검 등을 이용하여 효과적인 안테나 고장진단 방법에 대하여 제시한다.

• The Plant Pathology Journal
• /
• 제36권3호
• /
• pp.267-279
• /
• 2020

Fig mosaic is a viral disease (FMD) that spreads in Palestinian common fig (Ficus carica L.) orchards. Recognizing the economic value of fig plants and the harmful nature of FMD, the disease poses a significant threat to the economy of the fig production in Palestine. We applied the reverse transcription and amplification (RT-PCR) and PCR technique to leaf samples of 77 trees and 14 seedlings of 17 fig cultivars. The samples were collected from orchards in the main fig-growing provinces of the Palestinian West Bank, to assess the prevalence of viruses associated with FMD, and confirm a possible link of symptoms with viruses detected. Four viruses were detected: Fig mosaic virus (FMV), Fig badnavirus-1 (FBV-1), Fig leaf mottle-associated virus 2 (FLMaV-2), and Fig fleck-associated virus (FFkaV). FMV and FBV-1 were found in all tested fig plants (100%), while FLMaV-2 and FFkaV were detected in 61.5% and 33% of the fig samples, respectively. The high incidence of FBV-1 in the newly propagated symptomatic and symptomless seedlings from different cultivars may be an indication that FBV-1 is integrated into the genome of the fig in a cultivar nondiscriminatory manner. Very weak or no association was detected between FMD symptoms severity in the 17 Palestinian fig cultivars with the various viruses' combinations observed (i.e., number of the viruses infecting the plant). These results support the notion that FMD symptom severity expression is likely to be controlled by a combination of FMV infection, cultivars, and environmental factors, rather than the number of viruses infecting the plant.