• 천문학회보
• /
• 제37권2호
• /
• pp.239.1-239.1
• /
• 2012

This paper presents the results of one of early sciences with Korean VLBI Network (KVN): a large fringe survey of compact radio sources at 43GHz. We established the catalog of correlated flux densities in three ranges of baseline projection lengths of 637 sources from a 43 GHz (Q-band) survey observed with the Korean VLBI Network. Of them, 623 sources have not been observed before at Q-band with VLBI. The goal of this work in the early science phase of the new VLBI array is twofold: to evaluate the performance of the new instrument that operates in a frequency range of 22--129 GHz and to build a list of objects that can be used as targets and as calibrators. We have observed the list of 799 target sources with declinations down to $-40{\circ}$. Among them, 724 were observed before with VLBI at 22 GHz and had correlated flux densities greater than 200 mJy. The overall detection rate is 78%. The detection limit, defined as the minimum flux density for a source to be detected with 90% probability in a single observation, was in a range of 115--180 mJy depending on declination. However, some sources as weak as 70 mJy have been detected. Of 623 detected sources, 33 objects are detected for the first time in VLBI mode. We determined their coordinates with the median formal uncertainty 20 mas. The results of this work set the basis for future efforts to build the complete flux-limited sample of extragalactic sources at frequencies 22 GHz and higher at 3/4 of the celestial sphere.

• Structural Engineering and Mechanics
• /
• 제48권3호
• /
• pp.367-382
• /
• 2013

Different types of long slender pile shall buckle with weak soil and liquefied stratum surrounded. Different from considering single side earth pressure, it was suggested that the lateral earth pressure can be divided into two categories while buckling: the earth pressure that prevent and promotes the lateral movement. Active and passive earth pressure calculation model was proposed supposing earth pressure changed linearly with displacement considering overlying load, shaft resistance, earth pressure at both sides of the pile. Critical buckling load calculation method was proposed based on the principle of minimum potential energy quoting the earth pressure calculation model. The calculation result was contrasted with the field test result of small diameter TC pile (Plastic Tube Cast-in-place pile). The fix form could be fixed-hinged in the actual calculation assuring the accuracy and certain safety factor. The contributions of pile fix form depend on the pile length for the same geological conditions. There exists critical friction value in specific geological conditions that the side friction has larger impact on the critical buckling load while it is less than the value and has less impact with larger value. The buckling load was not simply changed linearly with friction. The buckling load decreases with increased limit active displacement and the load tend to be constant with larger active displacement value; the critical buckling load will be the same for different fix form for the small values.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.143-148
• /
• 2013

When the fault occurs in power system, the fault-current exceeds breaking capacity of the circuit breaker. So, reliablity of the power system is decreased sharply. Superconducting fault-current limiter (SFCL) is operated without impedance in normal state. The fault-current is limited by its impedance during the fault condition. However, the SFCL has several weak points such as huge size, high-price, liquid-nitrogen operation for the real power system. In this paper, We suggested the high-speed interrupter to limit the fault-current in case of the single line-to-ground fault. In addition, we compared the high-speed interrupter with the SFCL to ensure the operation reliability. The proposed interrupter detected the fault-current through the CT, and the power was supplied by operation of the SCR control system. In this experiment, the power of high-speed interrupter was applied after the 4.8[msec] from fault instant. The on-off operation of the interrupter was started after half-cycle from the fault. The fault-current was flowed into the impedance element by the switching operation of the high-speed interrupter. So, the fault current was limited within one cycle, and then it didnt exceed the capacity of a circuit breaker. We confirmed that there was slight difference between the SFCL with high-speed interrupter in terms of limiting-time of the fault-current and switching speed of the SCR. The high-speed interrupter was considered to be more efficient than the SFCL in size, cost or reliability.

• 한국정보처리학회논문지
• /
• 제7권10호
• /
• pp.3138-3147
• /
• 2000

전자상거래는 인터넷이라는 가상 공간을 통해 이루어지므로, 시간과 장소에 구애받지 않는다는 강점이 있는 반면, 누구나 쉽게 접근할 수 있는 개방형 네트워크의 특성에 따라 보안상의 문제점이 대두될 수 있다는 약점을 동시에 갖고 있다. 따라서, 안전하고 효율적인 전자상거래 구현을 위해서는 전자상거래 보안상의 문제를 해결하기 위한 장치가 필요한데, 이러한 장치 중에 하나가 견고한 암호 알고리즘의 구축이라 할 수 있겠다. 본 논문에서 제안한 YK2(Young Ku Kang) 암호 알고리즘은 이러한 전자상거래 보안을 충족시켜주기에 적합한 시스템으로서, 기본적으로 입·출력의 키와 암호화에 사용되는 키의 크기가 각각 128비트로 구성되고 32회전으로 전개됨으로서 기존의 64비트를 사용했던 블록 암호 알고리즘의 한계를 극복할 수 있다. 또한, 암호화에 민감한 영향을 미치는 요소 중에 하나인 키 스케줄링을 보다 복잡하게 설계함으로써 계산 복잡도의 증가와 확률 계산의 증가를 도모하였다.

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.452-458
• /
• 2007

비교적 낮은 고도에서의 기상위험 탐지를 위한 항공기용 기상 레이다의 경우 강력한 지표면 반사파가 존재하게 되며 이러한 강력한 클러터의 제거 없이는 미약한 도플러 신호로부터 신뢰성 있는 기상 자료의 추출이 불가능하다. 그러나 시스템 위상잡음은 클러터 및 도플러 신호를 분산시켜 효율적인 클러터 제거에 심각한 문제를 일으킬 수 있다. 따라서 본 논문에서는 도플러 기상 레이다 시스템에서의 위상잡음을 모델링하고 이에 따른 클러터 및 신호에 미치는 영향 정도를 구체적으로 분석할 수 있도록 하였다. 또한 수신되는 클러터 및 도플러 신호전력의 비에 따른 위상잡음에 의한 클러터 전력 제거의 한계치를 고찰하였다. 수신되는 신호 대 클러터 비가 낮은 경우 상대적으로 강력한 클러터 전력의 위상잡음으로 인한 분산 현상으로 일정 정도 이상의 효율적인 클러터 제거가 어렵게 됨을 알 수 있다.

• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.317-331
• /
• 2014

An experimental study was performed to investigate the seismic performance of solid steel reinforced concrete (SRC) frames with special-shaped columns that are composed of SRC special-shaped columns and reinforced concrete beams. For this purpose, two models of two-bay and three-story frame, including an edge frame and a middle frame, were designed and tested. The failure process and patterns were observed. The mechanical behaviors such as load-displacement hysteretic loops and skeleton curves, load bearing capacity, drift ratio, ductility, energy dissipation and stiffness degradation of test specimens were analyzed. Test results show that the failure mechanism of solid SRC frame with special-shaped columns is the beam-hinged mechanism, satisfying the seismic design principle of "strong column and weak beam". The hysteretic loops are plump, the ductility is good and the capacity of energy dissipation is strong, indicating that the solid SRC frame with special-shaped columns has excellent seismic performance, which is better than that of the lattice SRC frame with special-shaped columns. The ultimate elastic-plastic drift ratio is larger than the limit value specified by seismic code, showing the high capacity of collapse resistance. Compared with the edge frame, the middle frame has higher carrying capacity and stronger energy dissipation, but the ductility and speed of stiffness degradation are similar. All these can be helpful to the designation of solid SRC frame with special-shaped columns.

• 한국컴퓨터정보학회논문지
• /
• 제11권4호
• /
• pp.231-241
• /
• 2006

최근 정보통신시설에 대한 사이버공격을 보면 추적회피기술, 방어우회기술 등이 급속도로 발전하고 있고 전 세계에 있는 다수의 취약시스템을 경유지로 사용하기도 하며 또한 새로 개발된 사이버공격 도구들을 보면 취약점 공격 추적회피 증거훼손 등 완전범죄를 노리는 기술들이 패키지형태로 개발되어 유포되고 있다. 따라서 단순 예방기술로는 한계가 있으며 사안에 따라서는 실시간 추적 등 특별한 절차를 통해서 대응할 수밖에 없다. 나아가 국경을 넘어서는 사이버범죄의 특성상 세계가 공동으로 대응할 수 있는 국제적인 협력과 관련된 절차법적 정비가 요구된다. 특히 미국은 사이버범죄대응절차법의 제정으로 이에 대응하고 있다. 그러나 우리 현행법은 단순히 침해행위에 대한 처벌규정 등 실체법 등의 규정만 있고 절차상으로는 오프라인 범죄인 일반 형사사건과 동일한 절차를 밟아 대응하는 수준에 머물러 있다. 따라서 본 논문에서는 미국의 사이버범죄에 대한 절차법을 살펴보고 우리나라의 현실적 문제점과 대응방안을 제시한다.

• 대기
• /
• 제31권4호
• /
• pp.421-431
• /
• 2021

The Yeongdong region is frequently vulnerable to heavy snowfall in winter in terms of societal and economical damages. By virtue of a lot of previous efforts, snowfall forecast has been significantly improved, but the performance of light snowfall forecast is still poor since it is very conducive to synoptic and mesoscale interactions, largely attributable to Taeback mountains and East Sea effects. An intensive observation has been made in cooperation with Gangwon Regional Meteorological Office and National Institute of Meteorological Studies in winter seasons since 2019. Two distinctive Cold Air Damming (CAD) events (14 February 2019 and 6 February 2020) were observed for two years when the snowfall forecast was wrong specifically in its location and timing. For two CAD events, lower-level temperature below 2 km ranged to lowest limit in comparisons to those of the previous 6-years (2014~2019) rawinsonde soundings, along with the stronger inversion strength (> 2.0℃) and thicker inversion depth (> 700 m). Further, the northwesterly was predominant within the CAD layer, whereas the weak easterly wind was exhibited above the CAD layer. For the CAD events, strong cold air accumulation along the east side of Taeback Mountains appeared to prevent snow cloud and convergence zone from penetrating into the Yeongdong region. We need to investigate the influence of CAD on snowfall in the Yeongdong region using continuous intensive observation and modeling studies altogether. In addition, the effect of synoptic and mesoscale interactions on snowfall, such as nighttime drainage wind and land breeze, should be also examined.

• Journal of Radiation Protection and Research
• /
• 제44권1호
• /
• pp.32-42
• /
• 2019

Background: There have been much efforts to develop the proper and realistic machine Quality Assurance (QA) reflecting on real Volumetric Modulated Arc Therapy (VMAT) plan. In this work we propose and test a special VMAT plan of plan-class specific (pcsr) QA, as a machine QA so that it might be a good solution to supplement weak point of present machine QA to make it more realistic for VMAT treatment. Materials and Methods: We divided human body into 5 treatment sites: brain, head and neck, chest, abdomen, and pelvis. One plan for each treatment site was selected from real VMAT cases and contours were mapped into the computational human phantom where the same plan as real VMAT plan was created and called plan-class specific reference (pcsr) QA plan. We delivered this pcsr QA plan on a daily basis over the full research period and tracked how much MLC movement and dosimetric error occurred in regular delivery. Several real patients under treatments were also tracked to test the usefulness of pcsr QA through comparisons between them. We used dynalog file viewer (DFV) and Dynalog file to analyze position and speed of individual MLC leaf. The gamma pass rate from portal dosimetry for different gamma criteria was analyzed to evaluate analyze dosimetric accuracy. Results and Discussion: The maxRMS of MLC position error for all plans were all within the tolerance limit of < 0.35 cm and the positional variation of maxPEs for both pcsr and real plans were observed very stable over the research session. Daily variations of maxRMS of MLC speed error and gamma pass rate for real VMAT plans were observed very comparable to those in their pcsr plans in good acceptable fluctuation. Conclusion: We believe that the newly proposed pcsr QA would be useful and helpful to predict the mid-term quality of real VMAT treatment delivery.

• 한국항공우주학회지
• /
• 제47권1호
• /
• pp.66-74
• /
• 2019

달 표면 전체에 걸쳐 열물성치를 확보하는 대신 단위 면적당 열질량을 이용하여 달 표면온도를 정확히 예측할 수 있는 개선된 집중계(Lumped System Model, LSM) 해석방법을 제시하였다. 최근에 발표된 연구에 기초하여 표토층 최상단의 단위 면적당 열 질량이 균일하다고 가정하고, 하부면 전도열유속 방정식을 이론적인 근거 하에 도입함으로써 DLRE 측정온도와 상당한 정도 잘 일치하는 달 표면의 온도지도를 구하였다. LSM 온도예측은 태양복사가 약한 황혼, 새벽 및 고위도 지역을 제외하면 DLRE 측정과 잘 일치하며, 이러한 지역에서의 온도 불일치는 하부 전도열유속 모델의 한계에 기인한다. 표면 지형과 열물성치가 매우 불균일한 지역에서 나타나는 비정상온도 영역을 제외하고 LSM 분석으로 생성된 달 표면 온도지도는 DLRE 측정 결과와 유사하다.