• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.87-87
• /
• 2010

We report a new patterning technique of inorganic materials by using thin-film transfer printing (TFTP) with atomic layer deposition. This method consists of the atomic layer deposition (ALD) of inorganic thin film and a nanotransfer printing (nTP) that is based on a water-mediated transfer process. In the TFTP method, the Al2O3 ALD growth occurs on FTS-coated PDMS stamp without specific chemical species, such as hydroxyl group. The CF3-terminated alkylsiloxane monolayer, which is coated on PDMS stamp, provides a weak adhesion between the deposited Al2O3 and stamp, and promotes the easy and complete release of Al2O3 film from the stamp. And also, the water layer serves as an adhesion layer to provide good conformal contact and form strong covalent bonding between the Al2O3 layer and Si substrate. Thus, the TFTP technique is potentially useful for making nanochannels of various inorganic materials.

• 한국전기전자재료학회논문지
• /
• 제36권4호
• /
• pp.397-402
• /
• 2023

We have developed inverted green phosphorescent organic light emitting diodes (OLEDs) using 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) and bis(carbazole-9-yl)biphenyl (CBP) hole transport layers. The driving voltage, current efficiency, power efficiency, and emission characteristics of devices were investigated. While the driving voltage for the same current density was about 1~2 V lower in the devices with the TAPC layer, the maximum luminance was higher in the device with the CBP layer. The maximum current efficiency and power efficiency were 3.2 and 2.7 times higher in the device with the CBP layer, respectively. The higher efficiency in the CBP device resulted from the enhanced hole-electron balance although weak parasitic recombination takes place in the CBP hole transport layer.

• 지구물리와물리탐사
• /
• 제21권3호
• /
• pp.162-170
• /
• 2018

본 연구는 전라북도 완주군 ${\bigcirc}{\bigcirc}$지역에서 발생한 대규모 땅밀림 산사태 지역에서 지구물리탐사(전기비저항 탐사, 굴절법 탄성파탐사) 기법을 활용하여 대규모 산지지반 변화를 파악하고 활동연약대를 추정하고자 수행 하였다. 또한 변성암 지역에서 발생한 땅밀림 산사태 특성을 파악하고, 대략적인 규모를 파악하였다. 표준관입시험으로 얻어진 N치와 전기비저항 탐사의 저비저항 이상대, 지표지질조사로 얻어진 인장균열 위치를 비교 분석한 결과, 지표하부 10 ~ 15 m 사이에 형성되어 있는 토사층에 존재하는 불연속면을 추정하였다. 이를 토대로 토사층의 불연속면과 연구결과로 얻어진 기반암의 추정선 사이의 활동연약대 분포를 확인하였다.

• 한국세라믹학회지
• /
• 제39권7호
• /
• pp.622-627
• /
• 2002

Multi-layer composites consisting of silicon nitride, silicon nitride-silicon carbide and boron nitride-alumina layers were prepared fly stacking the corresponding ceramic tapes. The composites demonstrated self-diagnostic capability and non-catastrophic failure behavior. The composites consisting of many thin layers exhibited high strength and stepwise increase of the electrical resistance during the flexure test. The strength of the composite with too thick silicon nitride layers was low and the electrical resistance was abruptly increased to the detection limit of the digital multi-meter during the test. An extensive crack branching was observed in the weak (BN + Al$_2$O$_3$)layer.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.121-126
• /
• 2003

The single layer direct-coupled YBCO SQUID magnetometers have been fabricated and characterized for the purpose of the measurement of weak magnetic signals in unshielded environment. Two types of magnetometers have been designed and fabricated using 10 mm$\times$ 10 mm substrates. We could operate the conventional 3-mm-wide solid pickup loop magnetometers more stably than the 12-parallel-line pickup loop magnetometers in laboratory environment. We developed a first-order electronic gradiometer system using the SQUID sensors with axial displacement of 80 mm without any mechanical alignment of magnetometers. The system with a software filter using calculation of discrete Fourier transform could record clearly weak pulse signal of 100 pT in a magnetically disturbed environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.887-888
• /
• 2003

We report the electroluminescence properties of single- and multi-layer electroluminescence devices using PtOEP phosphor. Weak emission bands with peaks at 540 and 567 nm are observed in the former and latter devices, respectively, besides the well-known 648 nm PtOEP emission. The 540 nm emission increases in proportion to the third power of current density, while the 648 nm emission band increases linearly. Discussion is made on a reason for a much smaller luminance of PtOEP compared with $Ir(ppy)_{3}$ phosphor.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.144-148
• /
• 2016

Recently, silk sericin has been studied extensively for biomedical and cosmetic applications because of its unique properties, including UV resistance and wound healing ability. For use in applications, sericin is fabricated in various forms including films and gels. However, the mechanical properties of sericin are too weak. In this basic study on improving the mechanical properties of sericin, a silk sericin aqueous solution was separated into two layers by centrifugation. The solution viscosity, molecular conformation, and mechanical properties of each separation layer of the sericin were examined. Sericin from the lower layer had a higher solution viscosity and film mechanical properties (strength and strain) than that from the upper layer, implying that sericin from the lower layer had a higher molecular weight than that from the upper layer. The molecular conformation of the sericin films varied depending on the casting solvent. In aqueous solution, the sericin film from the lower layer showed a ${\beta}$-sheet conformation, whereas that from the upper layer displayed a random coil conformation. All the sericin films showed a highly ${\beta}$-sheet-crystallized state when cast in formic acid, regardless of the separation layer.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.323-326
• /
• 2009

We have developed blue-emitting phosphorescent organic light emitting diodes (OLEDs) using 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) and tris (8-quinolinolato)aluminum ($Alq_3$) electron transport layers. As blue dopant and host materials, bis[(4,6-di-fluorophenyl)-pyridinate-N,C2']picolinate (FIrpic) and N,N'-dicarbazolyl-3,5-benzene (mCP) were used, respectively. The driving voltage, current efficiency and emission characteristics of devices were investigated. While the driving voltage was about $1{\sim}2$ V lower in the device with an $Alq_3$ layer, the current efficiency was about 66 % higher in the device with BCP electron transport layer. the blue phosphorescent OLED with BCP layer exhibited higher purity of color, resulting from a relatively weak electroluminescence intensity at 500 nm.

• Transactions on Electrical and Electronic Materials
• /
• 제8권3호
• /
• pp.125-130
• /
• 2007

DLC coating on ceramics is very useful for manufacturing the materials with hardness and low friction. Adhesion of DLC thin film on ceramics, on the other hand, is usually very weak. Adhesion of DLC film depends on many parameters such as contamination and chemical bonding between thin film and substrate. In this study, adhesion of DLC film on ceramics was improved by the intermediate layer when the plasma immersion ion deposition (PIID) technique was applied. It is found that the chemical composition and the thickness of intermediate layer have significantly an effect on the adhesion of DLC thin film on $Al_2O_3$.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.713-718
• /
• 1996

We identified two characteristic turbulent flow cases, weakening and strengthening, which appear at the downwind side. Observations were made two times, Dec. 2-3. 1995 and Feb. 13-14. 1996 at Pusan National University site located downwind side of Kumjeong mountain. Meteorological observation system, tethersonde, was adopted to present observation. In the case of the west wind which blows perpendicular to Sanghak mountain located westward from the site, the wind speed highly increased in exponential with height. Therefore, the low level wind speed was so weak just like Taylor(1988)'s review. While the wind speed was intensified at 200-400m layer when the northwest wind blows from the continental Siberian high. We suppose 기 is because of the strong vertical convergence of flow between the surface inversion layer and the upper one, and also the horizontal convergence along the saddle and valley between the two mountains, Kumjeong and Sanghak-because of Bernoulli's effect. The inversion layer existed at surface-l00m and 500-600m level and the strong wind existed at about 200-400m layer.