• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.371-372
• /
• 2010

This study was a result of mock-up test for the field application which was compared between low heat cement and temperature-reducing binder with the way of temperature crack reduction. The result of mock-up test was shown that the heat of hydration from the low heat cement and the temperature-reducing binder indicated 44 and $54^{\circ}C$ respectively.

• Journal of information and communication convergence engineering
• /
• v.11 no.1
• /
• pp.30-44
• /
• 2013

Traffic congestion has become a serious problem with the recent exponential increase in the number of vehicles. In urban areas, almost all traffic congestion occurs at intersections. One of the ways to solve this problem is road expansion, but it is difficult to realize in urban areas because of the high cost and long construction period. In such cases, traffic signal control is a reasonable method for reducing traffic jams. In an actual situation, the traffic flow changes randomly and its randomness makes the control of traffic signals difficult. A prediction of traffic jams is, therefore, necessary and effective for reducing traffic jams. In addition, an autonomous distributed (stand-alone) point control of each traffic light individually is better than the wide and/or line control of traffic lights from the perspective of real-time control. This paper describes a stochastic optimum control of crossroads and multi-way traffic signals. First, a stochastic model of traffic flows and traffic jams is constructed by using a Bayesian network. Secondly, the probabilistic distributions of the traffic flows are estimated by using a cellular automaton, and then the probabilistic distributions of traffic jams are predicted. Thirdly, optimum traffic signals of crossroads and multi-way intersection are searched by using a modified particle swarm optimization algorithm to realize real-time traffic control. Finally, simulations are carried out to confirm the effectiveness of the real-time stochastic optimum control of traffic signals.

• Journal of information and communication convergence engineering
• /
• v.22 no.1
• /
• pp.14-22
• /
• 2024

This study presents the design of a Wilkinson power divider for three-way output ports (WPD3OP), which incorporates a defected ground structure (DGS). An asymmetric power divider is integrated into the output ports of the conventional Wilkinson power divider (WPD), establishing a three-way output port configuration. The DGS introduces periodic or irregular patterns into the ground plane to suppress unwanted electromagnetic wave propagation, and its incorporation can enhance the performance of the power divider, in terms of the power-division ratio, isolation, and bandwidth, by reducing spurious resonances. The proposed design algorithm for an asymmetric power divider for three-way output ports is analyzed via circuit simulations using High-Frequency Simulation Software (HFSS). The results verify the validity of the proposed method. The analysis of the WPD3OP integrated with DGS certifies the achievement of a center frequency of 2 GHz. This confirmation is supported by schematic ideal design simulation results and measurements encompassing insertion losses, return losses, and isolation.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.261-264
• /
• 2001

This paper relates to a node structure of a multiway search tree and a search method using the node structure and, more particularly, to a search method for accelerating its search speed by reducing the depth of each small tree in a multi-way search tree. The proposed idea can increase the number of keys capable of being recorded on a cache line by using one pointer at a node of the multi-way search tree so that the number of branches in a network address search is also increased and thus the tree depth is reduced. As a result, this idea can accelerate the search speed and the speed of the forwarding engine and accomplish a further speed-up by decreasing required memories and thus increasing a memory rate.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.692-694
• /
• 1993

Acoustic noise from the various facilities makes man unpleasant and let researchers find the way for reducing it on environmental point of view. Special way to reduce the acoustic noise had suggested by the concept of Active Silencer. But, it has propagation delay time accumulated during the signal passage and howling effect. This paper suggestes a way to anhilate howling effects, and reduces the total delay time drasticaly by attaching microphone to the speaker. This paper will show how it works by some materials.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.12-13
• /
• 2019

Flexible Table Form is being used more frequently at the level of formwork in construction site. However, one of the most common structural frameworks, the RC column-beam structure, is having problems in these factors. To improve this problems, this study developed support devices and proposed installation specifications to enable application of the one-way void slab method to flexible table form. It is expected that the effects of reducing the self-weight of the slab in the floor slab construction using flexible table form.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.24-29
• /
• 2011

Comparing conventional one-way relaying, two-way relaying scheme with network coding can achieve high throughput by reducing the transmission time. Coded cooperation protocol, which is a algorithm that uses coding on physical layer, can achieve high reliability. In this paper, we propose coded cooperation protocol over two-way relay network. Simulation results show proposed protocol has better performance in terms of reliability and throughput compare with conventional amplify and forward protocol. Also, with same throughput, proposed protocol has better performance in terms of reliability compare with the conventional hybrid decoded and forward protocol.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.3
• /
• pp.125-131
• /
• 2018

STT-RAM is attracting as a next generation Non-volatile memory for replacing cache memory with low leakage energy, high integration and memory access performance similar to SRAM. However, there is problem of write operations as the other Non_volatile memory. Hybrid cache memory using SRAM and STT-RAM is attracting attention as a cache memory structure with lowe power consumption. Despite this, reducing the leakage energy consumption by the STT-RAM is still lacking access to the Dynamic energy. In this paper, we proposed as energy management method such as a way-selection approach for hybrid L2 cache fo SRAM and STT-RAM and memory selection method of write/read operation. According to the simulation results, the proposed hybrid cache memory reduced the average energy consumption by 40% on SPEC CPU 2006, compared with SRAM cache memory.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.425-430
• /
• 2015

This paper is a study to improve the classification efficiency of rotating objects by using deep neural networks to which a deep learning algorithm was applied. For the classification experiment of rotating objects, COIL-20 is used as data and total 3 types of classifiers are compared and analyzed. 3 types of classifiers used in the study include PCA classifier to derive a feature value while reducing the dimension of data by using Principal Component Analysis and classify by using euclidean distance, MLP classifier of the way of reducing the error energy by using error back-propagation algorithm and finally, deep learning applied DBN classifier of the way of increasing the probability of observing learning data through pre-training and reducing the error energy through fine-tuning. In order to identify the structure-specific error rate of the deep neural networks, the experiment is carried out while changing the number of hidden layers and number of hidden neurons. The classifier using DBN showed the lowest error rate. Its structure of deep neural networks with 2 hidden layers showed a high recognition rate by moving parameters to a location helpful for recognition.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.137-144
• /
• 2015

Development of the yarn sorting equipment (khonhook) by slide way due to the principle of engineering that cause of workers on the long of motion time. The data was collected from the weaving group Ban Nongkok village, Nakornratchasima Province, THAILAND. According to the study, the step of yarn sorting (konhook) was one of the steps that affect long of motion time. The problem was the inadequate capacity equipment. The objective of research was to study and develop the yarn sorting equipment (konhook). The fabric used in the study was 64 meters in length and 1 meter in width. Researchers studied the processes the yarn sorting (konhook) which it consists of seven sub steps, 1) the thread tube setting, 2) yarn bunching, 3) tying a knot at the end of yarn, 4) looping the yarn into a pillar, 5) sorting the yarn (konhook), 6) crossing pillars and 7) taking out the yarn. Researchers focused on studying yarn sorting process (konhook) by designing and creating a device for yarn sorting (konhook) for reducing yarn sorting (konhook) time by the original method performance indicators. The results found that the developed yarn sorting equipment (konhook) ) by slide way could reduce working time from 7.24 minutes to 6.08 minutes of the original equipment yarn sorting (konhook). This means it could make the process 16.02 % faster. This also helps reducing the distance of workers' movement from 2,234 meters to 8 meters. This is 99.64 % shorter.