• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.994-1001
• /
• 2007

Changes in shear force value, transverse sections, myofibrils and intramuscular connective tissue of bovine skeletal muscle exposed to the combination of high-pressure up to 400 MPa and heat (30 and $60^{\circ}C$) were studied. The shear force value decreased by pressure-heat treatment up to 200 MPa at 30 and $60^{\circ}C$, and then slightly increased over 200 MPa at $30^{\circ}C$. Shear force values of treated muscles were lower than those of untreated ones. Gaps between muscle fibers in the untreated muscle were a little clear, and then they became very clear in the treated muscles up to 200 MPa at 30 and $60^{\circ}C$. However, the gaps reduced significantly over 200 MPa at $30^{\circ}C$. The remarkable rupture of I-band and loss of M-line materials progressed in the myofibrils with increasing pressure applied. However, degradation and loss of the Z-line in myofibrils observed in the muscle treated at $60^{\circ}C$ was not apparent in the muscle treated at $30^{\circ}C$. The length of the sarcomere initially contracted by pressure-heat treatment of 100 MPa at $30^{\circ}C$ seemed to have recovered with increase of the pressure up to 400 MPa. In the muscle treated at $60^{\circ}C$, the length of sarcomere gradually decreased with increase of the pressure up to 400 MPa. In the treated muscles, changes in the honeycomb-like structure of endomysium were observed and accelerated with increase of the pressure. A wavy appearance clearly observed at the inside surface of endomysium in the untreated muscles gradually decreased in the treated muscles with increase of the pressure. Tearing of the membrane was observed in the muscles treated over 150 MPa at $30^{\circ}C$, as observed in the sample pressurized at 100 MPa at $60^{\circ}C$. The roughening, disruption and fraying of the membrane were observed over 200 MPa at $60^{\circ}C$. From the results obtained, the combination of high-pressure and heat treatments seems to be effective to tenderize tough meat. The shear force value may have some relationship with deformation of intramuscular connective tissue and myofibrils.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.418-418
• /
• 2008

The electrochemical etching of silicon in HF-based solutions is known to form various types of porous structures. Porous structures are generally classified into three categories according to pore sizes: micropore (below 2 nm in size), mesopore (2 ~ 50 nm), and macropore (above 50 nm). Recently, the formation of macropores has attracted increasing interest because of their promising characteristics for an wide scope of applications such as microelectromechanical systems (MEMS), chemical sensors, biotechnology, photonic crystals, and photovoltaic application. One of the promising applications of macropores is in the field of MEMS. Anisotropic etching is essential step for fabrication of MEMS. Conventional wet etching has advantages such as low processing cost and high throughput, but it is unsuitable to fabricate high-aspect-ratio structures with vertical sidewalls due to its inherent etching characteristics along certain crystal orientations. Reactive ion dry etching is another technique of anisotropic etching. This has excellent ability to fabricate high-aspect-ratio structures with vertical sidewalls and high accuracy. However, its high processing cost is one of the bottlenecks for widely successful commercialization of MEMS. In contrast, by using electrochemical etching method together with pre-patterning by lithographic step, regular macropore arrays with very high-aspect-ratio up to 250 can be obtained. The formed macropores have very smooth surface and side, unlike deep reactive ion etching where surfaces are damaged and wavy. Especially, to make vertical microwire or nanowire arrays (aspect ratio = over 1:100) on silicon wafer with top-down photolithography, it is very difficult to fabricate them with conventional dry etching. The electrochemical etching is the most proper candidate to do it. The pillar structures are demonstrated for n-type silicon and the formation mechanism is well explained, while such a experimental results are few for p-type silicon. In this report, In order to understand the roles played by the kinds of etching solution and mask patterns in the formation of microwire arrays, we have undertaken a systematic study of the solvent effects in mixtures of HF, dimethyl sulfoxide (DMSO), iso-propanol, and mixtures of HF with water on the structure formation on monocrystalline p-type silicon with a resistivity with 10 ~ 20 $\Omega{\cdot}cm$. The different morphological results are presented according to mask patterns and etching solutions.

• Biomedical Science Letters
• /
• v.6 no.4
• /
• pp.269-279
• /
• 2000

This present study was investigated to elucidate degenerative changes according to the change of habitual environment on the myocytes of doves by restricting them from flight that is instinct behavior of this animal and strong exercise. To restrict doves from flight, they were confined in the cage (1 $m^3$) for 2 months. After this period, the myocardium of the experimental group was compared to that of wild doves in the ultrastructural and cytochemical ways. In addition, stereological changes were also examined. The results were as followings: 1. The body weight of the confined experimental groups was higher than that of the wild doves, but the ratios of the pectoral muscle/body weight (p<0.05) and the heart/body weight were lower. 2. At the ultrastructural level, the myocardium of confined doves appeared as wavy fibers in the smaller area than in the myocardium of wild doves. Also, the length of sarcomeres was longer in the confined doves. The number of sarcoplasmic reticulum and capillary was smaller in the myocardium of confined doves. 3. Cytochemical examinations showed that the activities of cytochrome oxidase were lowered in the confined doves. 4. Stereological analysis revealed that the density of myofibrils was greater in the confined doves. In contrast the volume density of sarcoplasmic reticulum (p<0.05) and the surface density of mitochondrial inner membrane (p<0.05) was lower in the confined doves, while the numerical density of mitochondrial inner membrane was higher (p<0.05). These results suggest that even the short period of restricted exercise can induce negative effects on the functions of myocytes of doves that are adapted for the strong exercise such as flight. Therefore, the maintenance of prolonged exercise seems to be one of the important factors that are critical to retain the functions of myocardium.

• Applied Microscopy
• /
• v.33 no.4
• /
• pp.299-313
• /
• 2003

The aim of the present study was to assess the role of protein kinase C (PKC) in the development of cardiac injury following scald burn. Sprague-Dawley rats were induced a scald burn a 15% total body surface area. Phorbol 12-myristate 13-acetate (PMA, 2 mg/kg) and bisindolylmaleimide (BIS, 0.05 mg/kg) were immediately administered i.p. after burn injury. 5 h and 24 h later, heart was removed and examined biochemical assay, ultrastructural changes and stereological analysis. The activity of serum aspartate aminotransferase was significantly increased at 5h (p<0.01) and 5h+BIS (p<0.001) after burn compared with that of control. The activity of serum creatinine was significantly decreased in PMA-treated groups after burn compared with postburn 5 h. PMA caused a decrease in MPO activity and induced wavy fibers in cardiac myocytes at postburn 5 and 24h. BIS induced contraction band, separation of intercalated disk and abnormal mitochondria in cardiac myocytes at postburn 5 and 24h. In stereological analysis, treatment of rats with PMA increased volume density of myofibril and mitochondria compared with postburn 5 and 24h. Our data suggest that the activation of PKC in scald burned heart decreases inflammation and protects the myocardium.

• Applied Microscopy
• /
• v.15 no.2
• /
• pp.111-129
• /
• 1985

The morphology and histology of the gastrointestinal mucosa of the mole, Talpa micrura coreana (Thomas), were studied using light and scanning electron microscopes. Tissue specimens were taken from body and pyloric portions of the stomach, and from the initial, proximal, middle, distal and terminal portions of the intestine. For light microscopy, tissue blocks were fixed in 10% buffered neutral formalin, embedded in paraffin wax, and sectioned at a thickness of $5{\mu}m$. These sections were stained with hematoxylin-eosin. For scanning electron microscopy, tissue blocks were fixed in 1% glutaraldehyde-1.5% paraformaldehyde, and postfixed in 1% osmium tetroxide, dehydrated in graded alcohol, transferred to isoamylacetate and dried by the critical point drier(Polaron E 3000). Subsequently, specimens were coated with gold and observed with a JSM-35C scanning electron microscope. The results were as follows: The mucous membrane of the body portion of the stomach had numerous irregular folds and the pyloric mucosa formed the strawberry-shaped folds, and general histological structures of each portion were similar to those of man. The intestine could not be differentiated macroscopically and microscopically into small and large intestines. There was no cecum, appendix, taenia coli, haustra coli or appendices epiploicae. In the initial portion (4 mm long), conical or tongue-shaped villi with the height of $143.3{\pm}10.7{\mu}m$ were present, and large mucous glands were seen in the submucosa. In the proximal, middle and distal portions, wavy folds composed of the epithelium and lamina propria were densely and transversely arranged, and their heights were $440.4{\pm}45.5{\mu}m,\;454.4{\pm}19.9{\mu}m\;and\;205.2{\pm}33.5{\mu}m$, respectively. The mucosa of the terminal portion (3 cm long) formed several longitudinal folds, and the intestinal glands were directly opened on the smooth surface of the folds. Aggregated lymphoid follicles were observed in the major portions of the intestine except the initial and terminal portions. There was no circular or semilunar fold throughout the intestine.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.