• 융합신호처리학회논문지
• /
• 제3권3호
• /
• pp.14-20
• /
• 2002

본 논문에서는 현재의 인터넷 환경하에서 클라이언트가 가진 대역폭을 최대한 활용하여 최선의 서비스를 제공할 수 있는 웨이브릿 기반에서 SPIHT(set partitioning in hierarchical trees)를 이용한 비디오 데이터의 압축과 멀티스트림을 이용한 전송 기법을 제안한다. 실험 결과, 제안한 방법은 웨이브릿 기반 비디오 부호화기를 이용하였기 때문에 동일한 비트율에서 기존의 DCT(discrete consine transform) 기반 비디오 부호화보다 블록킹 현상이 없이 화질이 약 1.5dB가 상승하였으며, 점진적 전송이 가능하였다. 그리고, 고압축시 발생하는 에러 전파를 막기 위해 TCP(transmission control protocol)상에서 효율적인 전송과 네트워크의 지터에 강하며 클라이언트가 가진 대역폭을 최대한 활용할 수 있는 멀티스트림 전송을 통해 그 효용성을 확인하였다.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.248-254
• /
• 2009

The worn crater wear geometry of coated tools after machining has been configured by using Confocal Laser Scanning Microscopy(CLSM) and the Wavelet-based filtering technique. The CLSM can be well suited to construct the three-dimensional crater wear on the rake surfaces of coated tips. However, The raw heightness data of HEI(height encoded image) acquired by CLSM must be filtered due to the electronic and imaging noise occurring in constructing the crater image. So the Wavelet-based filtering algorithm is necessary to denoise the shape features in a micro scales so as to realize accurate crater wear topography analysis. The crater wear patterns filtered enable us to predict the crater wear shape in order to study the tool wear evolution. The study shows that the technique by combining the CLSM and Wavelet-based filtering is an excellent one to obtain the geometries of worn tool rake surfaces over a wide range of surface resolution in a micro scale.

• 전기학회논문지P
• /
• 제61권2호
• /
• pp.87-92
• /
• 2012

Voltage and current phasor estimation has been executed by GPS-based synchronized PMU, which has become an important way of wide-area blackout protection for the prevention of expending faults in a power system. The PMU technique can not easily get the field data and it is impossible to share information, so that there has been used a FNET(Frequency Monitoring Network) method for the wide-area intelligent protection in USA. It consists of FDR(Fault Disturbance Recorder) and IMS(Information Management System). Therefore, FDR must provide an optimal frequency estimation method that is robust to noise and failure. In this paper, we present comparative studies for the frequency estimation method using IRDWT(Improved Recursive Discrete Wavelet Transform), FRDWT(Fast Recursive Discrete Wavelet Transform), and DFT(Discrete Fourier Transform). The Republic of Korea345[kV] power system modeling data by EMTP-RV are used to evaluate the performance of the proposed two kinds of RDWT(Recursive Discrete Wavelet Transform) and DFT. The simulation results show that the proposed frequency estimation technique using FRDWT could be the optimal frequency measurement method, and thus be applied to FDR.

• 인터넷정보학회논문지
• /
• 제11권2호
• /
• pp.99-107
• /
• 2010

본 연구에서는 디지털 영상의 블라인드 워터마킹 알고리즘을 제안하였다. 제안한 알고리즘은 웨이블릿 평면에서 처리되는 변환 평면 워터마킹 알고리즘으로서 2차원 EMD을 이용하여 분해된 워터마크의 EMF 성분들이 웨이블릿 대역에 삽입되어, 각 웨이블릿 대역은 워터마크의 일부 정보만을 포함하고 있는 것을 특징으로 하고 있다. 워터마크의 추출은 각 웨이블릿 대역에서 추출한 워터마크의 일부 정보들을 2차원 EMD의 선형적인 특징에 의해 산술적 또는 논리적 연산을 통하여 회복할 수 있도록 하였다. 개발한 워터마킹 알고리즘은 비가시성, 강인성 등 워터마킹 알고리즘에서 요구되는 조건들에 대한 실험을 수행하여 성능을 비교 분석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1677-1685
• /
• 2014

Major problem in the high voltage power transmission line is the flashover due to polluted ceramic insulators which leads to failure of equipments, catastrophic fires and power outages. This paper deals with the development of a better diagnostic tool to predict the flashover and pollution severity of power transmission line insulators based on the wavelet transform and fuzzy c-means clustering approach. In this work, laboratory experiments were carried out on power transmission line porcelain insulators under AC voltages at different pollution conditions and corresponding leakage current patterns were measured. Discrete wavelet transform technique is employed to extract important features of leakage current signals. Variation of leakage current magnitude and distortion ratio at different pollution levels were analyzed. Fuzzy c-means algorithm is used to cluster the extracted features of the leakage current data. Test results clearly show that the flashover and pollution severity of power transmission line insulators can be effectively realized through fuzzy clustering technique and it will be useful to carry out preventive maintenance work.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.23-49
• /
• 2007

Wavelet transforms are the emerging signal-processing tools for damage identification and time-frequency localization. A small perturbation in a static or dynamic displacement profile could be captured using multi-resolution technique of wavelet analysis. The paper presents the wavelet analysis of damaged linear structural elements using DB4 or BIOR6.8 family of wavelets. Starting with a localized reduction of EI at the mid-span of a simply supported beam, damage modeling is done for a typical steel and reinforced concrete beam element. Rotation and curvature mode shapes are found to be the improved indicators of damage and when these are coupled with wavelet analysis, a clear picture of damage singularity emerges. In the steel beam, the damage is modeled as a rotational spring and for an RC section, moment curvature relationship is used to compute the effective EI. Wavelet analysis is performed for these damage models for displacement, rotation and curvature mode shapes as well as static deformation profiles. It is shown that all the damage indicators like displacement, slope and curvature are magnified under higher modes. A localization scheme with arbitrary location of curvature nodes within a pseudo span is developed for steady state dynamic loads, such that curvature response and damages are maximized and the scheme is numerically tested and proved.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.26-32
• /
• 2007

This study was carried out fusion-welded butt joints in SWS 490A high strength steel subjected to tensile test that load-deflection curve. The windowed or short-time Fourier transform(WFT or STFT) makes possible for the analysis of non-stationary or transient signals into a joint time-frequency domain and the wavelet transform(WT) is used to decompose the acoustic emission(AE) signal into various discrete series of sequences over different frequency bands. In this paper, for acoustic emission signal analysis to use a continuous wavelet transform, in which the Gabor wavelet base on a Gaussian window function is applied to the time-frequency domain. A wavelet transform is demonstrated and the plots are very powerful in the recognition of the acoustic emission features. As a result, the technique of acoustic emission is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• 전자공학회논문지T
• /
• 제35T권3호
• /
• pp.37-45
• /
• 1998

본 논문에서는 웨이브렛 변환을 이용하여 EMI(Electromagnetic Interference: 전자파 장해) 신호로부터 각각 다른 주파수 성분과 시간정보를 동시에 추출하고, 시간과 주파수 영역에서 웨이브렛 변환의 수행결과를 해석할 수 있도록 하였다. Daubechies-4 필터 계수를 사용한 다중해상도 해석(multiresolution analysis)을 수행하여 EMI 신호로부터 대상 신호의 주파수 성분이 속하는 주파수 대역을 추출하고, 웨이브렛 변환 결과를 통하여 시간정보를 얻었다. 또한 웨이브렛 변환 결과를 평가하기 위해 상관해석법을 시도하고, 웨이브렛 함수에 따른 변환 결과를 비교함으로써 해석하고자 하는 신호에 가장 적합한 웨이브렛 함수를 선택하여 신호의 파형분석과 고조파 해석을 시뮬레이션으로 검증하였다. 그리고 soft thresholding 기법을 이용하여 EMI 신호에 대한 잡음제거의 효과를 입증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.342-348
• /
• 2005

This study was carried out fusion-welded butt joints in SWS 490A high strength steel subjected to tensile test that load-deflection curve. The windowed or short-time Fourier transform (WFT or SIFT) makes possible for the analysis of non-stationary or transient signals into a joint time-frequency domain and the wavelet transform (WT) is used to decompose the acoustic emission (AE) signal into various discrete series of sequences over different frequency bands. In this paper, for acoustic emission signal analysis to use a continuous wavelet transform, in which the Gabor wavelet base on a Gaussian window function is applied to the time-frequency domain. A wavelet transform is demonstrated and the plots are very powerful in the recognition of the acoustic emission features. As a result, the technique of acoustic emission is ideally suited to study variables which control time and stress dependent fracture or damage process in metallic materials.

• 한국정보통신학회논문지
• /
• 제14권6호
• /
• pp.1409-1415
• /
• 2010

본 논문에서는 웨이블릿 변환 영역에서 구성한 부대역간의 트리구조와 공간 영역에서의 영상 형태 정보를 이용하여 워터마크의 삽입 위치를 결정한 후에 워터마크를 삽입하는 기법을 제안하였다. 웨이블릿 영역에서 높은 주파수를 가지는 부대역을 다수의 영역으로 나누고 각 블록에 대한 에너지와 전체 에너지의 평균값 등을 이용하여 워터마킹을 위한 후보영역을 얻는다. 또한 공간 영역에서 얻어진 영상의 경계 정보를 이용하여 워터마크가 삽입될 후보 영역을 구한다. 무작위 난수와 웨이블릿 영역에서 이웃 웨이블릿 계수간의 관계를 이용하여 워터마킹 후보영역 내에 워터마크를 삽입한다. 마지막으로 역 웨이블릿 변환을 수행하여 워터마크가 삽입된 영상을 생성한다. 제안된 워터마킹 알고리즘은 JPEG과 같은 압축과 블러링, 선명화, 그리고 가우시안 잡음 등의 공격에 대해서 우수한 특성을 보였다.