• 전기학회논문지
• /
• 제58권5호
• /
• pp.1035-1040
• /
• 2009

We propose a new encoder/decoders based on an tune able wavelength converter(TWC) and an arrayed waveguide grating(AWG) router for large capacity optical CDMA networks. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• 한국통신학회논문지
• /
• 제30권5A
• /
• pp.359-369
• /
• 2005

본 논문에서는 대용량 광 부호분할 다중접속(Optical CDMA) 네트워크를 위해, 가변 파장변환기(TWC)와 도파로 열격자(AWG)를 이용한 공유형 부호기/복호기를 제안하였다. 제안한 부호기/복호기는 TWC의 동적 코드 할당 특성과 AWG의 순환(cyclic) 특성을 이용하여 다수의 가입자가 동일한 부호기와 복호기를 공유할 수 있도록 파장시간의 2차원 코드를 사용한다. 2차원 코드 구성 방법인 GMWPC(Generalized Multi-wavelength Prime Code)와 GMWRSC(Generalized Multi-wavelength Reed-Solomon Code)를 사용한 시뮬레이션을 통해 다수의 가입자를 위해 동적 코드 할당을 할 수 있는 제안한 부호기/복호기 구조의 타당성을 제시하였다. 제안한 부호기/복호기는 다중 접속 간섭을 일으키지 않으면서 동시 사용자 수를 증가시키며, 상대적으로 짧은 코드 길이를 사용함으로써 채널 효율을 향상시킬 수 있는 장점을 가지고 있다.

• 대한전자공학회논문지SD
• /
• 제47권10호
• /
• pp.29-33
• /
• 2010

변형된 time mapped prime sequences를 time spreading pattern에 이용하여 다양한 wavelength-time codeword를 구현하는 방법을 연구하였다. 이 연구 결과 $P_t$ = 3 일 때는 autocorrelation sidelobe와 crosscorrelation을 1이하로 유지하며 사용하는 파장 수의 제곱에 해 당하는 wavelength-time codeword를 생성 할 수 있으며 $P_t$ = 5 와 $P_t$ = 7 일 때는 crosscorrelation을 1이하로 유지하면서 $P_w$개의 wavelength-time codeword에 대해서 autocorrelation sidelobe를 2이하로 제한하는 범위에서 역시 사용하는 파장 수의 제곱에 해당하는 wavelength-time codeword를 생성할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2013-2014
• /
• 2006

For large capacity optical CDMA networks, we propose a shared-type encoder/decoder based on an tunable wavelength conveter (TWC) and an arrayed waveguide grating (AWG) router. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using three types of wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC), the generalized multi-wavelength Reed-Solomon code(GMWRSC) and the matrix code. Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• ETRI Journal
• /
• 제30권2호
• /
• pp.255-260
• /
• 2008

We compare the performance of a wavelength remodulated wavelength-division-multiplexed passive optical network implemented using Manchester-coded or inverse-return-to-zero (IRZ)-coded signal downstream and non-return-to-zero remodulated signal upstream. We investigate the effects of varying differences between downstream and upstream bit rates on the two coding schemes. When the bit rate ratio of upstream to downstream is less than or equal to 50%, the performance of Manchester coding is better than that of IRZ coding. However, when the bit rate ratio of upstream to downstream is higher than 50%, Manchester code requires appropriate time delay between upstream and downstream signals, whereas IRZ code needs reduced extinction ratio in the downstream signal.

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.13-20
• /
• 2014

In this paper, we implemented the object scanning with nxtOSEK which is an open source platform. nxtOSEK consists of device driver of leJOS NXJ C/Assembly source code, TOPPERS/ATK(Automotive real time Kernel) and TOPPERS/JSP Real-Time Operating System source code that includes ARM7 specific porting part, and glue code make them work together. nxtOSEK can provide ANSI C by using GCC tool chain and C API and apply for real-time multi tasking features. We experimented the 3D scanning with ultra sonic and laser sensor which are made directly by laser module diode and experimented the measurement of scanning the object by knowing x, y, and z coordinates for every points that it scans. In this paper, the laser module is the dimension of $6{\times}10[mm]$ requiring 5volts/5[mW], and used the laser light of wavelength in the 650[nm] range. For detecting the object, we used the beacon detection algorithm and as the laser light swept the objects, the photodiode monitored the ambient light at interval of 10[ms] which is called a real time. We communicated the 3D scanning platform via bluetooth protocol with host platform and the results are displayed via DPlot graphic tool. And therefore we enhanced the functionality of the 3D scanner for identifying the image scanning with laser sensor modules compared to ultra sonic sensor.

• 천문학회보
• /
• 제38권2호
• /
• pp.62.1-62.1
• /
• 2013

We present the Exposure Time Calculator of IGRINS (Immersion Grating Infrared Spectrograph). The noises of IGRINS and the simulated emission line can be calculated from the combination of Telluric background emission and absorptions, the emission and transmission of the telescope and instrument optics, and the dark noise and the read noise of the infrared arrays. For the atmospheric transmissions, we apply the simulated spectra depending on the Precipitable Water Vapor (PWV) values. In case of calculation of noises, the user needs to input the expected target magnitude, the weather conditions, and the desired exposure time. In addition to the simulated emission line, the parameters of rest wavelength, line-flux, Doppler shift and line-width are needed. The output would be the expected signal-to-noise for each spectral resolution element. The source-code of IGRINS-ETC v2.1.1 is available to be downloaded on the World Wide Web.

• 한국광학회지
• /
• 제26권5호
• /
• pp.269-274
• /
• 2015

본 논문에서는 code V 시뮬레이터를 이용하여 광 HDMI 인터페이스에 적용하기 위한 집적형 2채널 TO 구조 광송신기의 광학계 설계를 하였다. 제안된 집적형 2채널 TO 구조 광송신기는 지름의 6.4 mm인 하나의 8 pin TO-CAN 패키지 안에 2개의 VCSEL을 평행하게 부착하고 그 위에 반구(hemisphere) 렌즈가 부착된 직육면체 모양($1mm(H){\times}2mm(W){\times}4mm(D)$)의 렌즈필터 블록 (lens filter block) 을 올려놓은 구조이다. 집적형 2채널 TO 구조 광송신기 제작 시 1060 nm/1270 nm와 1330 nm/1550 nm로 두 개 파장씩 묶어 TO-CAN 형태로 제작하므로, 이들 파장 조합에서 반구 렌즈의 지름은 0.6 mm, 볼 렌즈와 렌즈 필터 간격(L)은 파장 1060 nm/1270 nm 조합의 경우 1.7 mm, 파장 1330 nm/1550 nm 조합의 경우 2.0 mm일 때 최적의 결과를 얻을 수 있었다. 이때 렌즈필터 블록의 초점거리($f_0$)는 1060 nm, 1270 nm, 1330 nm, 1550 nm 파장에 대하여 0.351 mm, 0.354 mm, 0.355 mm, 0.359 mm이었으며 렌즈 필터 블록과 볼 렌즈를 통과한 빛의 초점 위치(F)는 파장 1060 nm/1270 nm 조합의 경우 0.62 mm, 파장 1330 nm/1550 nm 조합의 경우 0.60 mm ~ 0.66 mm이었다.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.184-194
• /
• 2016

Many industrial processes require reliable temperature measurements in harsh environments with high temperature, dust, humidity, and pressure. However, commercially-available conventional temperature measurement devices are not suitable for use in such conditions. This study thus proposes a reliable, durable two-color radiation thermometer (RT) for harsh environments that was developed by selecting the appropriate components, designing a suitable mechanical structure, and compensating environmental factors such as absorption by particles and gases. The two-color RT has a simple, compactly-designed probe with a well-structured data acquisition system combined with efficient LabVIEW-based code. As a result, the RT can measure the temperature in real time, ranging from 300 to $900^{\circ}C$ in extremely harsh environments, such as that above the burden zone of a blast furnace. The error in the temperature measurements taken with the proposed two-color RT compared to that obtained using K-type thermocouple readouts was within 6.1 to $1.4^{\circ}C$ at a temperature range from 200 to $700^{\circ}C$. The effects of absorption by gases including $CO_2$, CO and $H_2O$ and the scattering by fine particles were calculated to find the transmittance of the two wavelength bands of operation through the path between the measured burden surface and the two-color probe. This method is applied to determine the transmittance of the short and long wavelength bands to be 0.31 and 0.51, respectively. Accordingly, the signals that were measured were corrected, and the true burden surface temperature was calculated. The proposed two-color RT and the correction method can be applied to measure temperatures in harsh environments where light-absorbing gases and scattering particles exist and optical components can be contaminated.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.362-377
• /
• 2023

Optical information processing technology is characterized by high speed and parallelism, and the light features short wavelength and large information capacity; At the same time, it has various attributes including amplitude, phase, wavelength and polarization, and is a carrier of multi-dimensional information. Therefore, optical encryption is of great significance in the field of information security transmission, and is widely used in the field of image encryption. For multi-image encryption, this paper proposes a multi-image encryption algorithm based on a modified Gerchberg-Saxton algorithm (MGSA) in the Fresnel-transform domain and computational ghost imaging. First, MGSA is used to realize "one code, one key"; Second, phase function superposition and normalization are used to reduce the amount of ciphertext transmission; Finally, computational ghost imaging is used to improve the security of the whole encryption system. This method can encrypt multiple images simultaneously with high efficiency, simple calculation, safety and reliability, and less data transmission. The encryption effect of the method is evaluated by using correlation coefficient and structural similarity, and the effectiveness and security of the method are verified by simulation experiments.