• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.509-514
• /
• 2003

Mach-Zehnder interferometric wavelength converters with monolithically integrated semiconductor optical amplifiers (SOA's) have been fabricated and characteristics of wavelength conversion at 10 Gb/s have been investigated for wavelength span of 40 nm. The devices have been achieved by using a butt-joint combination of buried ridge structure type SOA's and passive waveguides. In the integration, a new method has been applied that removes p+InP cladding layer leading to high propagation loss and forms simultaneously the current blocking and the cladding layer using undoped InP. The module packaging has been achieved by using a titled fiber array for effective coupling into the tilted waveguide in the wavelength converter. Using the module, wavelength conversion with power penalty lower than 1 ㏈ at 10 Gb/s has been demonstrated for wavelength span of 40 nm. In addition, it is show that the module can provide 2R (re-amplification, re-shaping) operation by demonstrating the conversion with the negative penalty.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.1-14
• /
• 2006

Multi-constraint QoS routing has been seen as crucial network property in the next generation optical Internet based on DWDM Networks. This paper proposes a new QoS routing algorithm based on flooding method, called bounded flooding routing (BFR) algorithm which can meet multi-constraint QoS requirements. Primarily, the BFR algorithm tries to reduce network overhead by accomplishing bounded-flooding to meet QoS requirements, and improve blocking probability and wavelength utilization. Also, as one effort to improve routing performance, we introduce a new concept, ripple count, which does not need any link-state information and computational process. For extensive analysis and simulation study, as a critical concern, in DWDM-based networks we deploy limited wavelength conversion capability within DWDM nodes. And the simulation results demonstrate that the BFR algorithm is superior to other predominant routing algorithms (both original flooding method and source-directed methods) in terms of blocking probability, wavelength channels required and overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1395-1404
• /
• 2000

In this paper, we propose a heuristic wavelength routing algorithm for IP datagrams in WDM (Wavelength-Division Multiplexing) networks which operates in a distributed manner, while most previous works have focused centralized algorithms. We first present an efficient construction method for a loose virtual topology with a connectivity property, which reserves a few wavelength to cope with dynamic traffic demands properly. This connectivity property assures that data from any source node could reach any destination node by hopping one or multiple lightpaths. We then develop a high-speed distributed wavelength routing algorithm adaptive to dynamic traffic demands by using such a loose virtual topology and derive the general bounds on average utilization in the distributed wavelength routing algorithms. Finally, we show that the performance of the proposed algorithms is better than that of the FSP(Fixed Shortest-Path) wavelength routing algorithms through simulation using the NSFNET[1] and a dynamic hot-spot traffic model, and that the algorithms is a good candidate in distributed WDM networks in terms of the blocking performance, the control traffic overhead, and the computation complexity.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.430-437
• /
• 2018

For a ship navigating in waves, added resistance, sway force and yaw moment due to waves differ from still water conditions, which affects the maneuverability of the ship. Therefore, it is important to estimate the sway force and yaw moment generated by waves. In this study, numerical simulations were carried out to calculate the hydrodynamic forces acting on a barge in still water and waves using CFD. Based on the results, the characteristics of course stability of a barge were investigated and analyzed. The hydrodynamic forces acting on the barge in waves were stronger than in still water, and it was confirmed that hydrodynamic forces become greater as wavelength becomes longer. In long wavelength regions, the (-) value of the yaw damping lever was larger than in still water. However, in short wavelength regions and when wavelength coincided with the length of the ship, values were smaller than in still water. In this region, it can be assumed that course stability improved. In other words, in long wavelength regions, the course stability of the barge was worse than in still water and short wavelength regions. Therefore, attention is required for safe navigation in long wavelength regions.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.61-66
• /
• 2014

We report the characterization of a wavelength-swept laser (WSL) using a polygon-based wavelength scanning filter and two semiconductor optical amplifiers (SOAs). The output intensity and scanning bandwidth of the WSL depend on the position of the two SOAs in the laser cavity and the coupling ratio of the output fiber coupler. The outputs of the WSL are characterized for coupling ratios of 10%, 30%, 50%, 70%, and 90% for the output fiber coupler. In the setup in which the output fiber coupler is located between the two SOAs, high output power and wide scanning bandwidth can be achieved with an optimized configuration. Using the optimized configuration of the WSL, the intensity increases with the coupling ratio. These results can be used to construct an optimized WSL using the polygon-based wavelength scanning filter.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.413-422
• /
• 2003

We have calculated the power extraction efficiency and the lasing wavelength distribution of index-coupled DFB lasers at threshold for various kL and facet reflectivity combinations, and compared with those above-threshold. The power extraction efficiency increases as the asymmetry of the facet reflectivities increases. The power extraction efficiency above-threshold is slightly larger than that at threshold. Since the relative photon density around the center region increases as kL increases, the power extraction efficiency decreases. The uniformity of the distribution of lasing wavelength over the stop band increases due to the relief of mode degeneracy as the asymmetry of the facet reflectivities increases. In the case of AR-HR combination, the lasing wavelength distributions at threshold are similar to those above-threshold. However, in the case of AR-AR combination, the lasing wavelength at threshold is concentrated on both edges of the stop band, while it is concentrated only on the longer wavelength edge above-threshold. As kL increases, the range of the lasing wavelength distribution increases due to the increase of the stop band. The effect of AR reflectivity on the power extraction and the lasing wavelength distribution is very weak.

• Journal of Mushroom
• /
• v.11 no.1
• /
• pp.24-31
• /
• 2013

As a result of advenced research, Penicillium growth inhibition effect in media of cauliflower mushroom by different LED lighting color inhibited all treated groups, but blue wavelength treatment group was unfitted for culture of cauliflower mushroom due to lots of spore of penicillium. So, to investigated characteristics of mycelial growth of cauliflower mushroom according to different LED wavelength and LED wavelength color. As a results, all red wavelength treatment groups found highest mycelial growth tendency. Thus, mycelial growth investigated different quantity of red lighting wavelength conditions. The quantity of lighting wavelength was low intention, 1.41 ${\mu}mol/m^2S$ treatment group found highest mycelial growth. Effects of mycelial growth by subculture found difference of statistical in one time to carry out a subculture treatment group. Mycelial growth by different quantity of LED lighting in different media composition of wood chip media indicated highest trend in the Korean pine treatment groups. To cultured treatment group for 84th days found difference of statistical, when a quantity of LED lighting red wavelength 2.11 ${\mu}mol/m^2S$ treated in wood chip of the Korean pine media. In conclusion, good culture condition of cauliflower mushroom estimated quantity of red lighting wavelength 2.11 ${\mu}mol/m^2S$ in wood chip media of the Korean pine for 84th days.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7B
• /
• pp.417-426
• /
• 2005

Routing and wavelength assignment problem is one of the most important issues in optical transport networks based on wavelength division multiplexing(WDM) technique. In this paper, we propose a novel approach using path conflict graphs and an algorithm for finding all edge disjoint paths. And then we compare the performance of the proposed algorithm with that of bounded greedy approach for EDP(BGAforEDP). The proposed one outperforms up to about 20$\%$ in the fixed traditional topology(NSFNET) and about 32$\%$ in random topologies over the BGA for EDP algorithm.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.89.2-89.2
• /
• 2010

The dye-sensitized solar cell (DSSC) is a device for the conversion of visible light into electricity, based on the sensitization of wide bandgap semiconductors. The performance of the cell mainly depends on a dye used as sensitizer. The absorption spectrum of the dye and the anchorage of the dye to the surface of $TiO_2$ are important parameters determining the efficiency of the cell. Generally, transition metal coordination compounds(ruthenium polypyridyl complexes) are used as the effective sensitizers, due to their intense charge-transfer absorption in the whole visible range and highly efficient metal-to ligand charge transfer. However, ruthenium polypyridyl complexes contain a heavy metal, which is undesirable from point of view of the environmental aspects. Moreover, the process to synthesize the complexes is complicated and costly. Alternatively, organic dyes can be used for the same purpose with an acceptable efficiency. The advantages of organic dyes include their availability and low cost. We designed and synthesized a series of organic sensitizers containing long wavelength absorption-chromophores for the dye sensitized solar cell. The DSSC composed of Blue-chromophores for the sensitization absorbed long wavelength region which is different also applied into the dye-cocktail (mixing) system. The photovoltaic property of DSSCs organic long wavelength absorption-chromophores were measured and evaluated by comparison with that of individual chromophores.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.