• Journal of Biomedical Engineering Research
• /
• v.27 no.4
• /
• pp.143-153
• /
• 2006

The purpose of this work was to assess and quantify the beneficial effects of gas exchange, while testingto the various frequencies of the sinusoidal wave that was excited by the PZT actuator, for patients suffering from acute respiratory distress syndrome (ARDS) or chronic respiratory problems. Also, this paper considered a simulator to design a hollow type artificial lung, and a mathematical model was used to predict a behavior of blood. This simulation was carried out according to the Montecarno's simulation method, anda fourth order Runge-Kutta method was used to solve the equation. The experimental design and procedure are then applied to the construction of a new device to assess the effectiveness of the membrane vibrations. As a result, the vibration method is very effective in the increase of gas transport. The gas exchange efficiency for the vibrating intravascular lung assist device can be increased by emphasizing the following design features: consistent and reproducible fiber geometry, and most importantly, an active means of enhancing convective mixing of water around the hollow fiber membranes. The experimental results showed the effective performance of the vibrating intravascular lung assist device. Also, we concluded that important design parameters were blood flow rates, fiber outer diameter and oxygen pressure drop. Based on the present results, it was believed that the optimal level of blood flow rates was 200$cm^3$/min.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.101-115
• /
• 2016

We carried out laboratory material tests on two cements (KS-1 ordinary Portland and Class G) with changing W/S (Water/Solid) and the content of fly ash in order to evaluate their physical and mechanical properties. The specimens of KS-1 ordinary Portland cement were prepared with varying W/S (Solid=cement) in weight, while those of Class G cement were prepared with changing the content of fly ash in volume but maintaining W/S (Solid=cement+fly ash). The results of the material tests show that as the W/S in KS-1 ordinary Portland cement and the content of fly ash in Class G cement increase, the properties (density, sonic wave velocity, elastic constants, compressive and tensile strengths, thermal conductivity) decrease, but porosity and specific heat increase. In addition, an increase in confining pressure and in the content of fly ash leads to plastic failure behavior of the cements. The laboratory data were then used in a stability analysis of cement sheath for which an analytical solution for computing the stress distribution induced around a cased, cemented well was employed. The analysis was carried out with varying the injection well parameters such as thickness of casing and cement, injection pressure, dip and dip direction of injection well, and depth of injection well. The analysis results show that cement sheath is stable in the cases of relatively lower injection pressures and inclined and horizontal wells. However, in the other cases, it is damaged by mainly tensile failure.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.10
• /
• pp.451-456
• /
• 2014

The correlations between electroencephalographic (EEG) spectral power and emotional responses during affective sound clip listening are important parameters. Hemispheric asymmetry in prefrontal activation have been proposed in two decades ago, as measured by power value, is related to reactivity to affectively pleasure audio stimuli. In this study, we designed an emotional audio stimulus experiment in order to verify frontal EEG asymmetry by analyzing Event-related Spectral Perturbation (ERSP) results. Thirty healthy college male students volunteered the stimulus experiment with the standard IADS(International Affective Digital Sounds) clips. These affective sound clips are classified in three emotion states, high pleasure-high arousal (happy), middle pleasure-low arousal (neutral) and low pleasure-high arousal (fear). The analysis of the data was performed in both theta (4-8Hz) and alpha (8-13Hz) bands. ERSP maps in the alpha band revealed that there are the stronger power responses of high pleasure (happy) in the right frontal lobe, while the stronger power responses of middle-low pleasure (neutral and fear) in the left frontal lobe. Moreover, ERSP maps in the theta band revealed that there are the stronger power responses of high arousal (fear and happy) in the left pre-frontal lobe, while the stronger responses of low arousal (neutral) in the right pre-frontal lobe. However, the high pleasure emotions (happy) can elicit greater relative right EEG activity, while the low and middle pleasure emotions (fear and neutral) can elicit the greater relative left EEG activity. Additionally, the most differences of theta band have been found out in the medial frontal lobe, which is proved as the frontal midline theta. And there are the strongest responses of happy sounds in the alpha band around the whole frontal regions. These results are well suited for emotion recognition, and provide the evidences that theta and alpha powers may have the more important role in the emotion processing than previously believed.