• Structural Engineering and Mechanics
• /
• 제71권5호
• /
• pp.577-601
• /
• 2019

The paper investigates the influence of the rheological parameters which characterize the creep time, the long-term values of the mechanical properties of viscoelastic materials and a form of the creep function around the initial state of a deformation of the materials of the hollow bi-layered cylinder on the dispersion of the flexural waves propagated in this cylinder. Constitutive relations for the cylinder's materials are given through the fractional exponential operators by Rabotnov. The dispersive attenuation case is considered and numerical results related to the dispersion curves are presented and discussed for the first and second modes under the first harmonic in the circumferential direction. According to these results, it is established that the viscosity of the materials of the constituents causes a decrease in the flexural wave propagation velocity in the bi-layered cylinder under consideration. At the same time, the character of the influence of the rheological parameters, as well as other problem parameters such as the thickness-radius ratio and the elastic modulus ratio of the layers' materials on the dispersion curves, are established.

• 해양환경안전학회지
• /
• 제25권5호
• /
• pp.542-549
• /
• 2019

인천 영흥도 낚시어선 충돌사고와 같이 해양사고는 한 번 발생할 경우 많은 인명피해와 재산피해를 야기할 수 있다. 인천시는 이러한 해양사고를 예방하기 위해 해양사고 예방 안전관리 정책을 시행하고 있으며 특히, 차량용 무선통신기술(WAVE)기반 선박안전운행시범사업을 추진하여 충돌사고 예방을 위한 선박간 충돌경보 서비스를 주요 서비스로 제공할 예정이다. 하지만, 이러한 서비스를 사용자에게 제공하기 위해서는 구체적인 서비스 형태, 구성, 체계 등 표준화 방안 개발이 필요하고 이는 사용자 요구분석을 기반으로 분석이 되어야 한다. 본 연구에서는 해당 서비스의 대상이 되는 선박운항자와 유관기관 관계자의 요구분석을 통해 WAVE 통신기반 충돌경보 서비스 표준화 방안을 개발하여 제시하였다. 이는 실증사업에서 도출된 데이터와 더불어 지속적인 개선과 표준화를 위한 노력을 통해 서비스의 질적 향상, 전문성 및 신뢰성 확보 등에 기여하고 결과적으로 해양사고 예방에 큰 기여를 할 것으로 기대된다.

• 지구물리와물리탐사
• /
• 제5권1호
• /
• pp.18-22
• /
• 2002

단일 도달주시로서 최대에너지 도달주시는 카르히호프 구조보정을 위한 가장 적합한 연산자로 알려져 있다. 단순구조모델의 경우에 초동주시나 최대에너지 도달주시는 모두 정확한 카르히호프 구조보정 연산자로 사용될 수 있다. 그러나 구조가 복잡하고 속도대비가 큰 모델에 대해서 초동주시를 이용한 구조보정은 정확한 심도단면도를 얻을 수 없다. 즉 카르히호프 구조보정에서 요구되는 주시는 최대에너지 도달주시이지만 이 주시는 초동주시에 비해 상당히 많은 계산시간을 요한다. 본 논문에서는 일방향 파동방정식을 이용하여 최대에너지 도달주시에 근사한 주시를 계산하는 방법을 제안한다. 일방향 파동 방정식을 이용해 초동주시를 계산할 때 사용되는 WAS(Wrap Around Suppression, 두루마리현상억제)계수를 수평방향의 격자간격과 깊이에 대한 함수로 정의하고 음원 파형의 지연시간을 고려하여 최대 에너지 도달 시간에 근사한 주시를 구하였다. 이 주시의 타당성을 검증하고자 계산된 주시를 단순구조 및 복잡한 구조의 구조보정에 적용하고 그 심도단면도를 초동주시를 이용해 구한 심도단면도와 비교하였다.

• 한국지구과학회지
• /
• 제39권6호
• /
• pp.593-599
• /
• 2018

P파와 S파의 도착시간 정보는 지진 발생위치 결정, 1차원 및 3차원 지하구조 등 지진학 연구 수행에 중요한 정보이다. 최근 지진관측소의 수가 비약적으로 증가함에 따라 관측망을 운영하면서 수동으로 지진파의 도착시간을 측정하는 것은 상당한 시간이 소요되는 일이 되었다. 본 연구에서는 진원요소에 대한 사전정보(지진 발생위치와 시간)를 확보할 수 있는 경우 Akaike Information Criterion (AIC)을 적용하여 추가의 관측소에서 국지지진의 P파와 S파의 도착시간을 자동측정하였다. 해당 방법을 경산(DAG2) 지진관측소에 기록된 자료에 적용한 후 수동 측정한 값과 자동 측정한 값을 비교한 결과 P파의 경우 95.1%, S파의 경우 93.7%가 0.1초 이하의 차이를 보이면서 결정되는 것을 확인하였다. 자동측정결과의 높은 정확성은 향후 고밀도 지진관측망 운영에 성공적으로 적용될 수 있음을 시사한다.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.273-281
• /
• 2023

Recently, offshore structures for eco-friendly energy, such as wind and solar power, have been developed to address the problem of insufficient land space; in the case of energy generation, they are designed on a considerable scale. Therefore, the scalability of offshore structures is crucial. The Korea Research Institute of Ships & Ocean Engineering (KRISO) developed multi-linked floating offshore structures composed of floating bodies and connection beams for floating photovoltaic systems. Large-scale floating photovoltaic systems are mainly designed in a manner that expands through the connection between modules and demonstrates a difference in structural response with connection conditions. A fluid-structure coupled analysis was performed for the multi-linked floating offshore structures. First, the wave load acting on the multi-linked offshore floating structures was calculated through wave load analysis for various wave load conditions. The response amplitude operators (RAOs) for the motions and structural response of the unit structure were calculated by performing finite element analysis. The effects of connection conditions were analyzed through comparative studies of RAOs and the response's maximum magnitude and occurrence location. Hence, comparing the cases of a hinge connection affecting heave and pitch motions and a fixed connection, the maximum bending stress of the structure decreased by approximately 2.5 times, while the mooring tension increased by approximately 20%, confirmed to be the largest change in bending stress and mooring tension compared to fixed connection. Therefore, the change in structural response according to connection condition makes it possible to design a higher structural safety of the structural member through the hinge connection in the construction of a large-scale multi-linked floating offshore structure for large-scale photovoltaic systems in which some unit structures are connected. However, considering the tension of the mooring line increases, a safety evaluation of the mooring line must be performed.

• Clinical Endoscopy
• /
• 제56권2호
• /
• pp.229-238
• /
• 2023

Background/Aims: Shear wave elastography (SWE) is used for liver fibrosis staging based on stiffness measurements. It can be performed using endoscopic ultrasound (EUS) or a transabdominal approach. Transabdominal accuracy can be limited in patients with obesity because of the thick abdomen. Theoretically, EUS-SWE overcomes this limitation by internally assessing the liver. We aimed to define the optimal technique for EUS-SWE for future research and clinical use and compare its accuracy with that of transabdominal SWE. Methods: Benchtop study: A standardized phantom model was used. The compared variables included the region of interest (ROI) size, depth, and orientation and transducer pressure. Porcine study: Phantom models with varying stiffness values were surgically implanted between the hepatic lobes. Results: For EUS-SWE, a larger ROI size of 1.5 cm and a smaller ROI depth of 1 cm demonstrated a significantly higher accuracy. For transabdominal SWE, the ROI size was nonadjustable, and the optimal ROI depth ranged from 2 to 4 cm. The transducer pressure and ROI orientation did not significantly affect the accuracy. There were no significant differences in the accuracy between transabdominal SWE and EUS-SWE in the animal model. The variability among the operators was more pronounced for the higher stiffness values. Small lesion measurements were accurate only when the ROI was entirely situated within the lesion. Conclusions: We defined the optimal viewing windows for EUS-SWE and transabdominal SWE. The accuracy was comparable in the non-obese porcine model. EUS-SWE may have a higher utility for evaluating small lesions than transabdominal SWE.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.235-237
• /
• 2006

Tilting trains are now an established feature of railway operations throughout the world For intercity traffic, tilt provides operators with Increasing speeds, and therefore enhanced competitiveness, on existing routes where insufficient traffic or a lack of funds precludes the construction of a dedicated new high-speed railway. Appling the tilting train, we can expect 30% of speed up on existing lines, but the stability of the electric current would be low because of tilting the train. Also, the spark between the catenary and pantagraph cause environmental problems such as noise, radio wave malfunction. Therefore, the tilting on pantagraph for the Power suppling device is very essential for stable electric power supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.248-250
• /
• 2004

Tilting trains are now an established feature of railway operations throughout the world. For intercity traffic, tilt provides operators with increasing speeds, and therefore enhanced competitiveness, on existing routes where insufficient traffic or a lack of funds precludes the construction of a dedicated new high-speed railway. Appling the tilting train, we can expect 30% of speed up on existing lines, but the stability of the electric current would be low because of tilting the train. Also, the spark between the catenary and pantagraph cause environmental problems such as noise, radio wave malfunction. Therefore, the tilting on pantagraph for the power suppling device is very essential for stable electric power supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1211_1212
• /
• 2009

Tilting trains are now an established feature of railway operations throughout the world. For intercity traffic, tilt provides operators with increasing speeds, and therefore enhanced competitiveness, on existing routes where insufficient traffic or a lack of funds precludes the construction of a dedicated new high-speed railway. Appling the tilting train, we can expect 30% of speed up on existing lines, but the stability of the electric current would be low because of tilting the train. Also, the spark between the catenary and pantagraph cause environmental problems such as noise, radio wave malfunction. Therefore, the tilting on pantagraph for the power suppling device is very essential for stable electric power supply.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1199_1200
• /
• 2009

Tilting trains are now an established feature of railway operations throughout the world. For intercity traffic, tilt provides operators with increasing speeds, and therefore enhanced competitiveness, on existing routes where insufficient traffic or a lack of funds precludes the construction of a dedicated new high-speed railway. Appling the tilting train, we can expect 30% of speed up on existing lines, but the stability of the electric current would be low because of tilting the train. Also, the spark between the catenary and pantagraph cause environmental problems such as noise, radio wave malfunction. Therefore, the tilting on pantagraph for the power suppling device is very essential for stable electric power supply.