• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.603-609
• /
• 2005

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP( sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verify the validity of the developed program the numerical calculations for Wigley hull and Series 60 Cb=0.6 hull are performed and the results obtained after the numerical calculations are compared with the initial hulls.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.9-14
• /
• 2000

Computational methods can be classified roughly into two parts: one is the methods based on a potential flow theory, and the other is numerical solvers(CFD) based on Navier-Stockes equation. Methods based on a potential theory are more effective than CFD when the free surface effect is considered. Especially Rankine source method seems to become widespread for simulations of wave making problems. For computations of viscous flow problems, CFD techniques have rapidly been developed and have shown many successful results in the viscous flow calculation. Present paper introduces a computational system 'WAVIS' which includes a pre-processor, potential ant viscous flow solvers and a post-processor. To validate the system, the calculated results for modem commercial hull forms are compared with measurements. It is found that the results from the system are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• Journal of computational fluids engineering
• /
• v.8 no.2
• /
• pp.42-48
• /
• 2003

The issues associated with the application of CFD for ship design are addressed. Doubtlessly at the moment, CFD tools are very useful in evaluating hull forms prior to traditional towing tank tests. However, time-consuming pre-processing is an obstacle in the daily application of CFD tools to improve hull forms. The accuracy of computational modeling without sacrificing the usability of CFD system is also to be assessed. The wave generation is still predicted by using potential panel methods, while velocity profiles entering into propeller plane is solved using turbulent flow solvers. The choice of turbulence model is a key to predict nominal wake distribution within acceptable accuracy. The experimental data for CFD validation are invaluable to improve physical and numerical modeling. Other applications of CFD for ship design than hull form improvement are also given. It is certain that CFD can be a cost-effective tool for the design of new and better ships.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.60-63
• /
• 2003

Resistance performance of 3 G/T class coastal leisure boat is experimentally investigated at high speed ranges and the effect of a fin attached at hull side is studied together. Wave patterns are observed to make clear the relation between the resistance performances and the wave characteristics.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.251-256
• /
• 2002

Resistance performance of small size fishing vessel is experimentally investigated to find out the effect of fore-body shape and trim for the better hull form development. The tests are performed for four different cases in the high speed circulating water channel(CWC). Wave patterns are observed together to investigate the relation between the resistance performance and the wave characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.34-37
• /
• 2001

This research suggested the new algorithm controlled by micro processor which is already stored by various PWM form of output voltage by using fundamental data of the carrier and signal. The determined PWM pattern is not concerned with the signal wave form and the new algorithm can obtain the desired pulse width by synchronous of carrier. The PWM wave can be controlled with real time by using extra hardware and digital software and to speed up program processing, the control signals to switch the power semi-conductor of three phase PWM inverter, simultaneously use the output signal by microprocessor and extra hardware, and control signal by software. In the end, this method was proved by applying to Three phase voltage source inverter.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.552-556
• /
• 1989

The line equations can be expressed by a set of nonhomogeneous differential equation where forcing terms of these equations have been adopted. Equivalent-circuit representations of this paper are derived from solutions of the equations. The contribution of the external wave to the line is expressed in terms of ideal sources in the form of a cascade connection to the line. These representations art conveniently applicable to the various types of transmission lines because these Lines can often be written in the form of a chain matrix.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.5-8
• /
• 2002

The issues associated with the application of CFD for ship design are addressed. It is quite certain that the CFD tools are very useful in evaluating hull forms a prior to traditional towing tank tests. However, the time-consuming pre-processing is an obstacle in the daily application of CFD tools to improve hull forms. The accuracy of computational modeling without sacrificing the usability of CFD system is also to be assessed. The wave generation is still predicted by using potential panel methods, while velocity profiles entering into propeller plane is solved using turbulent flow solvers. The choice of turbulence model is a key to predict nominal wake distribution within acceptable accuracy. The experimental data for CFD validation are invaluable to improve physical and numerical modeling. Other applications of CFD for ship design than hull form improvement are also given. It is certain that CFD can be a cost-effective tool for the design of new and better ships.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.4
• /
• pp.65-70
• /
• 2001

An investigation into asymmetric vibrations of a clamped circular place under a harmonic excitation is made. We examine a primary resonance. in which the frequency of excitation is near the natural frequency of an asymmetric mode of the plate. We found not only a response haying the form of standing wave but also one having the form of traveling wave, which was not observed by Sridhar, Mook and ${Nayfeh}^{(1)}$

• Korean Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.110-113
• /
• 1999

Clothing shape is principally described in seven factors that are composed of clothing design, clothing material, clothing size, pattern design, sewing method and body motion etc. The aims of this study was to measurement out-line space-shape variation of clothing fitness with body by using the image processing. The subjects for direct anthropometric measurements were 248 female college students aged from 19 to 22. The data were statistically analyzed by principal analysis and cluster analysis. The results selected one somatotype. for the out-line space-shape variation of clothing fitness with body, there dimensional clothing shapes measured. and cross-sectional clothing shape obtained by the measurement was considered to be space wave form. The out-line space-shape variation of clothing fitness with body was observed between the node number and amplitudes of clothing wave form, and node number was determined at the maxim of space-shape amplitude, and the space-shape amplitudes have related with aspect ratio of cross-sectional shape. (Korean J of Human Ecology 2(1) :110-113, 1999)