• 제목/요약/키워드: waterproof

검색결과 475건 처리시간 0.03초

복합방수시트로 보강된 섬유보강콘크리트 휨거동 (Flexural Behavior of FRC with Composite Waterproof Sheet )

  • 김병일
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 가을학술발표대회논문집
    • /
    • pp.215-216
    • /
    • 2023
  • Leakage in the structure due to the irregular flow of groundwater in the underground structure penetrates into internal spaces such as underground parking lots and basement through underground walls, which is expensive in terms of maintenance of the building. In this study, various composite waterproofing methods installed on the outer walls of underground structures were selected to evaluate the structural performance of composite specimens due to bending behavior through experiments and analysis on bending test behavior on concrete attachment surfaces.

  • PDF

Improvement in Water Resistance of Desulfurized Gypsum by Novel Modification of Silicone Oil Paraffin Composite Emulsion-based Waterproofing Agent

  • Cao, Jing-Yu;Li, Jin-Peng;Jiang, Ya-Mei;Wang, Su-Lei;Ding, Yi;Oh, Won-Chun
    • 한국세라믹학회지
    • /
    • 제56권6호
    • /
    • pp.558-565
    • /
    • 2019
  • In this study, dimethyl silicone oil and liquid paraffin were combined and subsequently emulsified; the resulting mixture was innovatively incorporated into desulfurized gypsum to resolve its drawback of a poor water resistance. The waterproof mechanism of the composite emulsion and liquid paraffin emulsion with mass fractions of 1%, 2%, 3%, and 4% were investigated. The effect of the desulfurized gypsum on the waterproof performance and basic mechanical properties were also investigated. The configuration of the composite waterproofing agent was characterized by FTIR and 1HNMR. The results showed that, compared with the traditional liquid paraffin emulsion-based waterproofing agent, the softening coefficient of the silicone oil paraffin composite emulsion-based water-repellent agent was increased by 60% and attained a value of 0.89. Combined with the waterproof mechanism and microscope morphology analysis of gypsum hydration products, the improvement in the water resistance of water resistance was primarily attributed to the formation of a silicone hydrophobic membrane between the crystals of the gypsum block; this ensured that water could not penetrate the crystal.

수팽창 지수재의 방수 성능 및 내구성 평가 (Evaluation of waterproof and durability of hydrophilic waterstop)

  • 최우용;이현필;전기찬;이석원
    • 한국터널지하공간학회 논문집
    • /
    • 제16권2호
    • /
    • pp.117-124
    • /
    • 2014
  • 최근 국내에서는 쉴드 TBM (Tunnel Boring Machine)을 이용한 터널 굴착에 대한 관심이 크게 증가하고 있다. 쉴드 TBM 터널은 비배수 터널로써 세그먼트 이음부에서 누수가 발생할 경우에는 터널의 사용성 및 안정성에 문제가 될 수 있다. 본 연구에서는 첫째로 쉴드 TBM 터널의 세그먼트 시공 시 시공오차 및 세그먼트 과다변형에 의한 수팽창 지수재의 방수 성능 변화를 알아보았고, 두 번째로 지하수와 해수에 있을 수 있는 황산염과 염화물에 의한 수팽창 지수재의 내구성 저하를 알아보았다. 시험결과, 체결각 불합치가 $2^{\circ}$이상으로 시공 오차가 발생한 경우에는 수팽창 지수재의 차수 능력을 기대하기는 어려운 것으로 판단된다. 또한 수팽창 지수재가 황산마그네슘 용액에 장시간 노출될 경우에는 지수재의 내구 성능에 문제가 있을 수 있을 것으로 판단된다.

스포츠웨어용 투습방수직물의 열·수분이동 특성에 관한 연구 (A Study on the Heat and Moisture Transport Properties of Vapor-Permeable Waterproof Finished Fabrics for Sports Wear)

  • 손부현;김진아;권오경
    • 한국의류산업학회지
    • /
    • 제2권3호
    • /
    • pp.220-226
    • /
    • 2000
  • This study was to determine the characteristics of vapor-permeable waterproof finished fabric by the coating method. 4 different kinds of coating fabrics (A : wet, porous, polyurethane, B : dry, no porous, polyurethane, C : shape memory polyurethane and D : dry, porous polyurethane) were used, which were developed recently With this sample, moisture transport rate ($40^{\circ}C$, 45%RH & $40^{\circ}C$, 95%RH), changes of coating side's shape by washing times, water repellency rate, contracted length, qmax, heat conductivity, heat keeping rate, heat keeping rate with cotton, heat keeping rate on humidity temperature and humidity within clothing etc. were checked. And it was done in a climate chamber under $20{\pm}2^{\circ}C$, $65{\pm}5%RH$. The results of this study were as follow; In the moisture vapor transmission of sample B and C increased on high temperature and high humidity while sample A and D decreased, on this condition. Qmax rate had high relation with ground fabric's surface properties and the order was A>C>D>B. Heat conductivity had high relation with thickness and surface properties. Heat keeping rates on sweat condition showed around half percents of heat keeping rates on normal condition, but had no relation with moisture vapor transport rate. Changes of the fabric's properties by washing times were different in accordance with the construction of fabrics and the coating resin. Sample C had tow heat keeping rate on the high temperature and humidity and high heat keeping rate on the low temperature and humidity Moisture transport rate of vapor-permeable waterproof finished fabrics had high relation with the properties of ground fabrics on low humidity condition, but on the high humidity condition, it was highly related with the properties of coating resin.

  • PDF

주열식 지중연속벽체의 차수효과 확인 방안 (The Method of Certificating Waterproof Effect for Consecutive Column-Wall Mass in Underground)

  • 고용일
    • 한국지반환경공학회 논문집
    • /
    • 제18권9호
    • /
    • pp.5-9
    • /
    • 2017
  • 일반적인 지하수에 대해서는 지반공학적 방법((1)지반을 굴착한 후 지중연속벽체의 육안 확인, (2)벽체의 코아 채취 후 일축압축강도시험, (3)벽체 코아 채취 시 현장 투수시험)으로 주열식 지중연속벽체의 차수효과를 확인할 수 있다. 그러나, 폐기물 매립장내에서 발생하는 침출수와 같은 고농도 오염수 유출이나 침투의 차단에 대해서는 주변 지하수 등을 대상으로 현장에서 pH, 수온, 염분 농도 등을 측정하고 이들의 성분시험을 실시하여 기본 성분 및 성분비 등의 특성을 분석한 후 일치성 유사성을 판정하며, GC-MS를 이용하여서는 이들 시료수의 크로마토그램에 대한 피크의 높고 낮음의 차이 등 전반적인 분포패턴을 비교하여 간편하게 유사성 판정을 추가적으로 실시함으로써 객관성 있게 주열식 지중연속벽체의 차수효과를 확인하여야 한다.

전기화학 에칭 공정을 이용한 스테인리스 스틸 메쉬의 방수 특성 연구 (A Study on Water-Proof Characteristics of a Stainless Steel Mesh by Electrochemical Etching Process)

  • 이찬;김지민;김형모
    • Tribology and Lubricants
    • /
    • 제37권5호
    • /
    • pp.189-194
    • /
    • 2021
  • A straightforward, yet effective surface modification method of stainless steel mesh and its interesting anti-wetting characteristics are reported in this study. The stainless steel mesh is electrochemically etched, and the specimen has both micro and nano-scale structures on its surface. This process transforms the two types of mesh specimens known as the regular and dense specimens into hydrophobic specimens without applying any hydrophobic chemical coating process. The fundamental wettability of the modified mesh is analyzed through a dedicatedly designed experiment to investigate the waterproof characteristics, for instance, the penetration threshold. The waterproof characteristics are evaluated in a manner that the modified mesh resists as high as approximately 2.7 times the pressure compared with the bare mesh, i.e., the non-modified mesh. The results show that the penetration threshold depends primarily on the advancing contact angles, and the penetration stop behaviors are affected by the contact angle hysteresis on the surfaces. The findings further confirm that the inexpensive waterproof meshes created using the proposed straightforward electrochemical etching process are effective and can be adapted along with appropriate designs for various practical applications, such as underwater devices, passive valves, and transducers. In general, , additional chemical coatings are applied using hydrophobic materials on the surfaces for the applications that require water-repelling capabilities. Although these chemical coatings can often cause aging, the process proposed in this study is not only cost-effective, but also durable implying that it does not lose its waterproof properties over time.

투습방수 직물을 사용한 기능성 아우터의 특성 분석 - 소재, 세탁·취급, 디자인, 패턴, 부자재, 봉제를 중심으로 - (Analysis of Characteristics of Functional Outers with Moisture-permeable Waterproof Fabric - Focus on Fabrics, Washing·Cares, Design, Patterns, Subsidiary Materials, and Sewing -)

  • 노의경;윤미경
    • 한국의류산업학회지
    • /
    • 제23권1호
    • /
    • pp.129-141
    • /
    • 2021
  • This study investigated fabrics, washing and cares, design, pattern, subsidiary materials, and sewing methods with a focus on the functional outers using moisture-permeable waterproof fabric as a shell; in addition, each element was analyzed for differences depending on fabric type. The characteristics of 34 outers were investigated through labels, online product introductions, visual inspection, observations from two experts with more than 30 years experience and wear tests. Moisture-permeable waterproof fabrics used for the outer were classified into two types; in addition, the shell of the high-density fabric and the 2 & 3-layer fabrics had different characteristics. Various fabrics, detailed designs, and three-dimensional patterns suitable for each part of the human body were used to improve functionality. In addition, various subsidiary materials and sewing methods were used to form an organic relationship. The same washing and cares, patterns and subsidiary materials were used regardless of fabric type; however, the fabric type influenced the detailed design and sewing. The outers with high-density fabric had a loose fit, short placket, e-banded cuffs, lock-stitch, and lock-stitch+binding. However, the outer with 2 & 3 layer fabric had a slim fit, hood width adjustment, zippered pockets, cuffs with tab, seamless adhesive sewing such as laminating, lock-stitch+ seam-sealing, and welding.

시멘트 대체재료를 사용한 노후 저수지의 사면 개량에 따른 차수 및 보강 효과 분석 (Analysis of the Waterproof and Reinforcement Effect according to Slope Improvement of Aging Reservoir using Supplementary Cementitious Material)

  • 송상훤;조대성
    • 한국건설순환자원학회논문집
    • /
    • 제10권1호
    • /
    • pp.30-39
    • /
    • 2022
  • 본 연구에서는 비탈면 보강을 위해 순환자원을 재활용하여 개발된 시멘트 대체재료를 사용하여 노후 저수지의 사면 개량 재료로 활용하기 위해 실내시험 및 수치해석, 현장에서의 시험시공을 실시하고, 결과를 분석하였다. 실내시험 결과, 점착력과 내부마찰각의 변화를 고려할 때 시멘트 대체재료의 혼합비는 9 %가 적절하며, 투수계수는 약 10,000배 감소하여 국내에서 적용되고 있는 차수재료에 근접한 수준을 나타내는 것으로 분석되었다. 또한 수치해석과 시험시공 결과, 시멘트 대체재료를 사용하여 보강한 부분에서는 침투가 발생하지 않고, 국내 기준 대비 높은 안전율을 확보할 수 있어 충분한 차수 및 보강효과를 보이는 것으로 나타났다. 따라서 노후 저수지를 보강하기 위해 사용되고 있는 기존의 시멘트를 사용한 보수 및 보강방법을 충분히 대체할 수 있을 것으로 판단된다.

투습방수 소재의 역학적 성능에 관한 연구 (A Study on the Dynamic Performance of Waterproof and Breathable Materials)

  • 권명숙;권진
    • 복식
    • /
    • 제58권4호
    • /
    • pp.26-34
    • /
    • 2008
  • The purpose of this study was to create a database of information on the mechanical properties of two different waterproof and breathable shell fabric groups(high density woven and PTFE laminate) used for outdoor apparel and to compare and correlate data of their mechanical properties and hand values. The results of this study were as follows; There were no statistically significant differences between two fabric groups in extension, bending and shearing properties. There were statistically significant differences between two fabric groups in MMD, SMD, LC and we values. High density woven fabrics had smoother surface than PTFE laminated fabrics. PTFE laminated fabrics can be compressed easily more than high density woven fabrics but their recovery after compression was not better than high density woven fabrics. There were statistically significant differences between two fabric groups in NUMERI, FUKURAMI. There was statistically significant difference between two fabric groups in total hand value. Total hand value and mean deviation of MIU had a very high and statistically significant negative correlation coefficient.

3상 3선식 Plug-In MCCB의 인장력 및 접촉저항 평가에 관한 연구 (Study on the Evaluation of the Tension and Contact Resistance of a 3 Φ 3 W Plug-In MCCB)

  • 이병설;최충석
    • 한국안전학회지
    • /
    • 제28권4호
    • /
    • pp.43-47
    • /
    • 2013
  • The purpose of this paper is to evaluate the performance of a Plug-In MCCB developed for rapid power supply restoration when the MCCB is installed in a power system and to verify its reliability. Since the developed 3 ${\Phi}$ 3 W Plug-In MCCB can be installed on and removed from a bus bar by one touch using a plug housed at the rear, it can be replaced in a short period of time. Therefore, it can quickly respond to the normalization of a power system. When the Plug-In MCCBB is installed on a bus bar, the resistance between each phase and plug was measured to be 0.46 $m{\Omega}$ in average. When the Plug-In MCCB is installed, the tension in the vertical direction was measured to be 112.78 N in average, which is greater than the tension of 50 N specified in the related regulation. The withstanding voltage tests performed 5 times repeatedly by applying 6 kV to the developed Plug-In MCCB for 60 seconds shows good withstanding voltage characteristics. In addition, both the general waterproof test using a water injection method and the insulation resistance analysis using a Mega meter showed good waterproof and insulation characteristics.