• 생물환경조절학회지
• /
• 제13권3호
• /
• pp.149-155
• /
• 2004

본 연구에서는 주행경로의 설정 및 제어가 용이한 고정 경로 방식을 이용한 주행 시스템을 개발하여 온실의 형태, 고랑의 위치 등에 무관하게 자동관수 및 송풍장치에 따른 생육상태를 실험할 수 있는 다목적 자동작업시스템을 개발하였다. 이 시스템의 성능들을 알아보기 써해 초화류에 대하여 실험한 결과 다음과 같은 결과론 얻었다. 인력두상관수 처리구에서는 전반적으로 생육의 부진을 나타냈으며, 자동관수 처리 중 송풍을 하지 않은 무풍처리구치 경우, 초장 및 엽면적이 높은 것으로 나타났다. 초장의 억제는 저속과 고속송풍처리구에 있어 초장억제 효과가 유의성이 있게 나타났으며, 풍속이 빠를수록 초장억제효과가 높게 나타났다. 줄기의 지름은 송풍을 하지 않고, 자동관수 3회를 한 경우 줄기의 지름이 작은 것으로 나타났다. 엽수는 인력관수나 자동관수 2회 처리에 비하여 3회 처리가 더 많은 것으로 나타났다. 생육은 관수회수가 많을수록 생장량이 높게 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2928-2933
• /
• 2011

The urban railway has been planned not only the subway, but also the elevated railway in Seoul, South Korea. Therefore, it is steadily increasing civil complaints for railway noise passing through that residential district. In this paper, we focused on noise of squeal characteristics induced by interaction between railway vehicle's wheel and rail. Then we selected the point that carried out scattering water droplet to the rail and compared the noise level of the watering test results before and after. Scattering water test results showed that level of the noise reduced intermittently occurring high frequency characteristics of squeal noise as well as overall noise level. In the future, we will apply the sensor to the sprinkling system for noise reduction where the place of existing squeal noise is, and make a suggestion of this solution will be more economical, environmental-friendly, and appropriate to reduce the squeal noise occurred by railway vehicle than others.

• 산업기술연구
• /
• 제20권A호
• /
• pp.5-14
• /
• 2000

This study was conducted to cultivate a large quantity of high-quality Bonsai through the development of bottom irrigation system. Bonsai placed on the FRP bed were grown very well by bottom irrigation system compared with direct watering and sprinkler system. It was concluded that bottom irrigation system was possible to reduce considerable manual labor and produce mass production of high-quality Bonsai.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.73-86
• /
• 1995

The automatic control system in the greenhouse have to be developed to the direction of considering various factors the variables such as condition of the cultivation and greenhouse, the properties and types of products. Therefore, it is more important to set up variables appropriately than the problems of automatic control system itself, and the automatic control system which satisfy these problems should be simplified in the aspect of operation. In addition, even the individual automations are not perfect yet, so more studies are required for the development of comprehensive automatic system in korea. This study was carried out to automatize environment control systems for greenhouse, especially from most intensive labor requiring parts such as watering, irrigating liquefied fertilizer, spraying chemicals, mixing and ventilation system, etc. The results are summarized as follows. 1. Control type tensiometer was expected to be desirable in the automation of watering system, therefore, a new tensiometer was designed and developed through this study. 2. The chemical spraying system developed through this study was found to be excellent in the aspect of operation. 3. When pulse type water discharge meter was used in the mixing of liquefied fertilizer and chemical solution, the error of mixing were range $\pm$0.1~0.15%. 4. The water level switch of electrod type used for controlling water level was found to be affective in both control performance and operation cost. 5. The water and level control system can be omitted if each tank size are standardized in accordance with greenhouse size, therefore, the installation cost might be significantly reduced. 6. The developed general controller was excellent in hardware parts, but still remained to be improved in software parts.

• 생물환경조절학회지
• /
• 제13권3호
• /
• pp.143-148
• /
• 2004

시설원예 작업의 생력화을 위해 화훼온실, 육묘장, 잔디온실 및 분화재배온실에서 사용할 수 있는 다목적 자동작업장치를 개발하였다. 본 시스템의 구성은 주행부, 높이조절부, 살수부, 송풍부 및 흡입부로 되어 있다. 다목적 자동작업장치를 이용하여 다음과 같은 결과를 얻었다. 다이얼 변화에 따른 속도는 0.047～0.027 m/s로 나타났고, 에어커튼의 풍속은 고속, 중속, 저속에서 3.9 m/s, 3.6m/s, 3.4m/s로 나타났으나, 중앙 50cm의 위치에서는 0.2 m/s정도로 차이가 없었다. 관수압력이 높을수록 관수량이 많아졌으나 10kg/$\textrm{cm}^2$와 15kg/$\textrm{cm}^2$에서의 차이는 약 60ml, 15kg/$\textrm{cm}^2$와 20g/$\textrm{cm}^2$의 사이에는 약 20m1의 차이를 보였다. 흡입은 해충과 유사한 3～4 mm정도의 스티로폼 가루 및 풀 씨앗을 이용하여 측정한 결과 평균 유속은 3.64 m/s이고, 흡입유량은 0.044 ㎥/s이었다.

• Journal of Ginseng Research
• /
• 제6권1호
• /
• pp.84-99
• /
• 1982

Water content and its seasonal change in reprodltctive organs were reviewed in relation to cultivation practice s. Precipitati on and humidity under shade roof were reviewed in relation to shading ,jystem and environmental factors. High water content of reproductive organs suggests vulnerability to water stress during reproductive growth stage. Watering during dehisconce treat menu seems to keep optimum temperature but cnoventional practice seems to be too often In watering. Information effe on water physiology of seeds is too rare to develop seed storing method and ctive seed use. Dehiscent mechanism was considered in terms of water absorption of embryo. Precipitation rate of conventional shade roof reaclled to 38% and at line level 50% and varied with shade patterns. Precipitation rate under shade has been investigated for itself but should be investigated in relation to light intensity and soil moisture content Relative humidity under shade depends mainly on air humidity and soil moisture, considerably on shade materials and lithe on pole height, bed width or plant density. Since relative humidity was lower in afternoon it was often less than 50% even in summer with high temperature suggesting possible disorder of phi biological function especially in photosynthesis. More information was needed on optimum humidity for productive physiological function of leaf.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.117-127
• /
• 2022

The present study has investigated the performance of hydrogen gas generators for inhalation purposes based on polyelectrolyte membrane water electrolysis (PEMWE). The system applied two watering methods. One is pumped water (pumping system) and the other is gravity-fed water without a pump (non-pumping system). The cell efficiencies were compared by measuring the cell voltage and temperature in the hydrogen gas generator, respectively. The results show that the cell voltage and temperature increase with the cell current. The cell temperature is lower in the pumping system than that in the non-pumping system at a given cell current. Even though the amount of hydrogen production is the same regardless of the pumping system, the cell efficiency of the hydrogen gas generator in the non-pumping system is better than that in the pumping system.

• 한국가금학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 1997

The effects of genetic, physiological, and environmental factors(temperature, and type of watering system) on growth factors, accumulation of abdominal fat(AF), and the association between growth factors and AF of broilers and Athens-Canadian Randombred (ACRB) were studied in a series of nine trials. The final BW(6 or 7 wk) and 4-6 or 5-7 wk gain (G) were greater in groups raised at 21.1˚C than 26.7˚C. There was no consistent effects of environmental temperature on feed conversion ratio (FCR) although the FCR was significantly (P$\leq$.o5) reduced in 21. 1˚C group compared with the 26.7˚C group in two of six trials. The overall mean weight of AF relative to BW at 43 or 50 days of age were not significantly different between temperature groups: the means of AF of 21.1˚C and 26.7˚C groups were 1.81 and 1.78%, respectively. Environmental temperature had no consistent effect on the relationship between 4-6 or 5-7 wk C and 43 or 50 days AF, and 4-6 wk FCR and 43-days AF ; however, the association of 50 days AF with 5-7 wk FCR was highly significant in both temperature groups. The overall mean of correlation coefficient between FCR and AF was very low (r=.107). The waterer types did not significantly affect the AF. Generally, the effect of sex on the relationship between G and AF was not consistent in both sex groups. However, the association of AF with G was much greater in ACRB group compared with broiler group. The initial body weights (4 or S wk) was significantly (P$\leq$.001) correlated with AF in ACRB group, but not in the broiler groups. The effect of sire on AF was very high(P$\leq$.0001) in five of six trials.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1395-1404
• /
• 1993

Application of water-saving self-feeders can reduce water consumption of pigs by more than 50% . so the feeding-watering system one of the most important way of the reduction of the slurry. Bioactive deep litter housing can eliminate slurry. Matured urine, faeces and litter can use for the purposes of soil conditioning and fertilizing . Water-saving slurry handling technology can halve manure dilution so it can double the nutrient content of the slurry. By using of straw bale biofilter for reducing emissions of pig houses makes fattening of pigs possible close to populated area. Developed rate control system for slurry application make avoiding over-fertilization possible , can fulfill better the demand of nutrient of plants. By means of computer aided manure utilization system area distribution of soil characteristics can determinate . The system is suitable for planning the utilization of manure and slurry in environment -friendly way.

• Agricultural and Biosystems Engineering
• /
• 제5권2호
• /
• pp.50-54
• /
• 2004

The study aimed to develop a mechanized mushroom growing system for the substrate materials mixing and wetting, materials fermentation and pasteurisation through the design of integrated cultivation machine system for oyster mushroom. The power requirement of the prototype during fermentation operation was measured in the range of 31$\~$33 kg-m and the torque has not so much differ by the kinds and quantity of materials. The work efficiency of conventional method for stacking the heap and turning the heap of cotton waste by tractor rotavator and manual wetting required 78 hours. But the watering, fermentation and sterilisation by the prototype use same operation required 25.5 hours, which can save the operation labour by $67\%$. The machine can be saved the requirement of heating energy by $63\%$, and the machine can also be saved the material cost by $44\%$. It is envisaged that the machine can effectively be used for large mushroom growing farms or joint use mushroom growing group-farmers in a village.