• 접착 및 계면
• /
• 제16권4호
• /
• pp.156-161
• /
• 2015

본 연구에서는 수분산 폴리우레탄 아크릴레이트의 접착력 및 물성을 향상시키기 위하여 polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA), acrylate monomer를 사용하여 수분산 폴리우레탄 아크릴레이트를 합성하였다. 또한 합성된 수분산 폴리우레탄 아크릴레이트의 물성은 FT-IR, 입도분석, UTM, 접착력 등을 평가하였다. 입도 분석에서 아크릴산의 함량이 증가함에 따라 입자의 크기가 증가하였고, 기계적 물성을 평가한 결과, 아크릴산의 함량이 증가함에 따라 인장강도는 증가하였고 신율은 감소하였다. 접착강도는 PU/acryl 비율 중 acryl의 함량이 증가, 아크릴산의 함량이 증가할수록 증가하였다. 아크릴산의 함량이 0.5 wt%일 때 가장 높은 접착강도를 나타내었다.

• 폴리머
• /
• 제37권4호
• /
• pp.507-512
• /
• 2013

수분산 폴리우레탄(waterborne polyurethane; WPU)의 물리화학적/전기적 특성을 개선하기 위하여 그래핀에 이소시아네이트기를 도입하고 in-situ 방법으로 폴리우레탄을 중합하여 그래핀/WPU 나노 복합체를 제조하였다. 본 연구의 접근 방법으로 그래핀을 2 wt%까지 그래핀/WPU 나노 복합체에 도입하면 기존 WPU에 비해 인장강도가 57%, 전기전도도는 약 $10^2$배 정도 향상되는 결과를 얻었다. 또한 단순 블렌드 방법으로 만든 그래핀/WPU 복합체와 비교하였을 때, in-situ 중합 방법으로 제조된 복합체가 상대적으로 우수한 기계적 물성과 전기 전도도를 가졌다. 이것은 전자현미경을 이용한 복합체 단면의 형태학적 분석으로부터 이소시아네이트기가 개질된 그래핀(iGO)이 in-situ 중합 방법에 기인한 WPU 매트릭스와의 공유결합과 수소결합을 통하여 균일하게 분산되었기 때문이다.

• Corrosion Science and Technology
• /
• 제15권6호
• /
• pp.297-302
• /
• 2016

Water-based systems are dominating the coating market because of worldwide VOCs regulations. Research is focusing especially on waterborne polyurethane (WPU) because of its unique mechanical and chemical properties. However, commercial WPU consists of linear thermoplastic polymers with polar groups on the main chain, which do not perform as well as solvent-borne PU in a two-pack system. In this study, APTES were used as a chain crosslink agent to overcome commercial WPU's limited performance. WPUs synthesized by using a sol-gel process were evaluated with FT-IR, particle analysis, TGA, tensile tests, pull-off tests, SEM, and EIS. The results showed that WPUs with added APTES had better thermal stability, mechanical properties, and water resistance than did WPUs without added APTES. Consequently, the sol-gel process increased the crosslink density of WPUs and modified the WPU's own properties.

• 한국환경과학회지
• /
• 제16권8호
• /
• pp.891-896
• /
• 2007

Waterborne polyurethane dispersions (WPUD) were prepared by poly(ethylene glycol) adipate as the polyester type, ${\alpha},{\omega}-hydroxyalkyl$ terminated polydimethylsiloxane (PDMS-diol) as the polysiloxane type, hexamethylene diisocyanate, and isophorone diisocyanate, dimethylol propionic acid. The effects of PDMS-diol contents on the particle size, thermal and surface properties of WPUD were investigated. The structures of the synthesized WPUD were confirmed using by FT-IR. The surface, thermal and mechanical properties were investigated by measuring the contact angles, DSC, TGA and UTM. As PDMS-diol contents increased, the particle size, the contact angle, and the elongation was increased, while the tensile strength was decreased. Also the thermal stabilities of the synthesised WPUD were increased as PDMS-diol contents increased.

• Elastomers and Composites
• /
• 제35권4호
• /
• pp.281-287
• /
• 2000

폴리테트라메틸렌글리콜(PTMG) 및 디메틸올프로피온산(DMPA)의 몰비를 변화시키며 수분산성 폴리우레탄 마이크로겔 분산체를 합성하였다. 합성한 폴리우레탄 마이크로겔의 입도분포, 열적 및 기계적특성을 실험하였다. 마이크로겔의 입자크기는 $98{\sim}$680{\mu}m 범위에 분포되어 있으며, DMPA와 1,2,6-hexanetriol의 몰비가 증가함에 따라 감소하였다. 마이크로겔의 유리전이온도 및 융점은 각각 $-79.7 {\sim}-78.1^{\circ}C$, $22{\sim}24^{\circ}C$ 범위였으며, PTMG/DMPA의 몰비가 60/40인 폴리우레탄 마이크로겔 필름의 인장강도 및 신장률이 최대값을 나타내었다.

• 한국환경과학회지
• /
• 제21권4호
• /
• pp.507-515
• /
• 2012

To improve the mechanical properties of hydroxyapatite (HA)/waterborne polyurethane (WBPU) composites, the hydroxyl group of HA was modified by urethane reactions: the hydroxyl groups of HA were reacted with aliphatic or cyclic diisocyanate, and then the modified HAs were extended by adding polyol and/or ${\varepsilon}$-caprolactone. Composites were prepared by the prepolymer process method: the modified HA was directly pured into the urethane reaction of isocyanate and polyol. The properties of modified HA/WBPU composites were investigated by thermogravimetric analysis, tensile strength, and water resistance. The results showed that the reactivity of aliphatic diisocyanate to the hydroxy group of HA was faster than that of cyclic one. Comparing to those of pure HA/WBPU composite films, the thermal stability, water resistance, and mechanical properties of the modified composite films increased with a degree of modification of HA.

• 한국응용과학기술학회지
• /
• 제30권2호
• /
• pp.264-271
• /
• 2013

본 연구에서는 monoammonium phosphate가 WPU의 물성에 끼치는 영향을 필름 상태와 피혁(Full-Grain) 표면에 코팅을 하여 기계적 물성을 분석 하였다. DSC 결과 monoammonium phosphate가 많이 함유된 WPU-AM3 샘플이 $382^{\circ}C$로 높은 물성이 측정되었으며, 내용제성은 모든 샘플이 우수함을 알 수 있었다. 인장강도의 경우 monoammonium phosphate가 가장 많이 함유된 WPU-AM3($2.130kg_f/mm^2$)가 가장 낮은 물성을 보였으며, 연실율과 내마모성 역시 monoammonium phosphate가 많이 함유된 WPU-AM3가 615 % 및 52.07 mg.loss로 낮은 물성을 나타내었다.

• 접착 및 계면
• /
• 제8권4호
• /
• pp.8-13
• /
• 2007

본 연구에서는 teramethylxylene diisocyanate (TMXDI)와 poly(tetramethylene glycol) (PTMG), polycarprolactone (PCL), dimrthylol proponic acid (DMPA)를 사용하여 무용제형 수분산 폴리우레탄을 합성하였으며, 음이온성기의 함량이 열적, 기계적 물성 및 접착력에 미치는 영향을 검토하였다. 합성된 무용제형 수분산 폴리우레탄의 Tg는 $-70{\sim}-50^{\circ}C$ 범위이고 PCL의 함량이 증가함에 따라 Tg는 상승하였다. 인장강도와 접착력, 열 안정성은 PCL과 음이온성기의 함량이 증가함에 따라 증가하였고 신율은 감소하였다.

• 한국염색가공학회지
• /
• 제34권4호
• /
• pp.261-271
• /
• 2022

Waterborne polyurethane(WPU) is greatly affected by its properties depending on the average particle size. In this study, by analyzing the characteristics of WPUs with different average particle sizes according to the DMPA content and we confirmed that the WPU-Ms have different properties from the physical properties of WPU by mixing two types of WPU with different particle sizes in the same volume. At this time, we mixed WPU at an ideal ratio of 7:3 through literature research. In the thermal characteristic analysis, it was confirmed that the thermal decomposition temperature decreased and Tg increased as the content of DMPA, which is the hard segment, increased. In addition, the average particle size of WPU decreased as DMPA increased, and physical properties and adhesive strength were improved due to increased interaction. When mixed with each other in a weight ratio of 7:3, it was observed that adhesion and mechanical properties were improved compared to only WPU.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.112-120
• /
• 2023

Herein, we propose a facile water-processible method to develop an eggshell membrane (ESM)-embedded waterborne polyurethane (WPU)-based bio-degradable and bio-compatible coating material that exhibits attractive tactile properties. Virgin ESM is not dispersible in water. Hence, to develop the ESM-based WPU composite, soluble ESM (S-ESM) was first extracted by de-crosslinking the ESM. The extracted S-ESM at different concentrations (0, 0.5, 1.0, 1.5 wt %) was mixed with WPU. Compared to virgin WPU, the viscosity of S-ESM/WPU dispersion and the in-plane coefficient of friction (COF) of the composite film surfaces decreased with an increase in the S-ESM content. In addition, an increase in the S-ESM content improved the tribo-positive characteristics of the film. Different good touch-feeling biomaterials, such as fur, feather, and human skin exhibit tribo-positivity. Thus, the enhanced tribo-positive characteristics of the S-ESM/WPU and the decrease in their COF owing to an increase in the S-ESM content imply the enhancement of its touch-feeling performance. The S-ESM embedded WPU composites have potential applications as coating materials in various fields, including automobile interiors and artificial leather.