• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.561-567
• /
• 2010

Isophrone diisocyanate, poly(tetramethylene glycol)과 dimethylol propionic acid로부터 제조된, polyurethane 부분중합체의 미반응 NCO기를 aminopropyl triethoxysilane으로 capping시켜 silylated waterborne polyurethane을 합성하였다. 연이어 이것을 colloidal silica와 혼합하여 silylated waterborne polyurethane/silica nanocomposite를 제조하였다. 동적빛 산란법에 의해 측정된 nanocomposite 입자의 평균 크기는 silica 함유량과 무관하게 거의 일정한 수치를 나타내었다. 그러나 제조된 nanocomposite의 열적안정성은 순수한 waterborne polyurethane보다 우수하였다.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.332-338
• /
• 2001

Waterborne polyurethane as a new polymer electrolyte was synthesized by using relatively hydrophilic polyols. The morphology of polyurethane was changed as it was dispersed in water. In contrast to polyurethane ionomer, waterborne polyurethane did not form an ionic cluster but produced a binary system composed of hydrophilic and hydrophobic groups. In the colloidal system, the former and the latter existed at outward and inward, respectively. Waterborne polyurethane was prepared from poly(ethylene glycol) (PEG) /poly(propylene glycol) (PPG) copolymer, 4,4'-diphenylmethane diisocyanate(MDI), ethylene diamine as a chain extender, and three ionization agents, 1,3-propane sultone, sodium hydride and lithium hydroxide. PEG/PPG copolymer was used for suppressing the crystallinity of PEG and N-H bond was ionized for increasing the electrochemical stability of polyurethane. Low molecular weight poly(ethylene glycol) and poly(ethylene glycol dimethyl ether) (PEGDME) were used as plasticizers. DSC, FT-IR and $^1$H-NMR of the waterborne polyurethane were measured. Also, the ionic conductivity of solid polymer electrolytes based on waterborne polyurethane and various concentrations of low molecular weight poly(ethylene glycol) or PEGDME were measured by AC impedance.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.191-197
• /
• 2012

Isophorone diisocyanate(IPDI), polycarbonate diol(PCD), dimethylol propionic acid(DMPA)를 출발물질로 하여 제조된 폴리우레탄 prepolymer의 미반응 NCO기를 아크릴 단량체인 pentaerythritol triacrylate(PETA)로 capping시켜 acrylic terminated polyurethane prepolymer를 합성하였다. 그 후 이 prepolymer의 잔여 NCO기를 실란커플링제인 aminopropyl triethoxysilane(APS) 또는 glycidoxypropyl trimethoxysilane(GPTMS)와 반응시켜 silylated acrylic terminated waterborne polyurethane을 제조하였다. 동적 빛 산란법에 의해 측정된 순수한 수분산 폴리우레탄의 평균 직경은 PETA와 APS가 첨가됨에 따라 14.3 nm에서 208.6 nm로 크게 증가하였다. 또한 silylated acrylic terminated waterborne polyurethane 코팅 도막의 연필경도 및 내마모성은 순수한 수분산 폴리우레탄보다 우수하였다.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.207-212
• /
• 2015

The purpose of this research was to synthesize fluorine modified waterborne polyurethane dispersion (F-WPU) by soap-free (internal emulsifier) emulsion polymerization techniques, to prepare coating solution based on fluorine modified waterborne polyurethane dispersion (F-WPU) and to compare the chemical and thermo-mechanical properties on the electrogalvanized steel sheet. Environmentally friendly F-WPU was prepared with a fluorinated polyol containing 60 wt% of fluorine. There are various ways of combining a wide variety of fluorinated polyols and diisocyanate to exhibit novel properties of waterborne polyurethane dispersion. Components of coating solution were largely divided into 4 kinds i.e., F-WPU, acrylic emulsion, silane coupling agent, and colloidal silicate. F-WPU coating solution on the electro-galvanized steel sheet showed excellent properties of corrosion resistance, alkali resistance and heat resistance, as compared to other coating solutions using a general waterborne resin. The F-WPU coating solution's reliable effects are possibly due to the fluorine atoms incorporated even in a small amount of F-WPU.

• 한국염색가공학회지
• /
• 제29권1호
• /
• pp.25-36
• /
• 2017

This study worked on the synthesis of waterborne polyurethane/epoxy hybrid resins containing aminosilane compound to replace conventional phenol resins used for a coating material for loudspeaker dampers, which are not harmful to human being. Waterborne polyurethane resins were synthesized from two diisocyanate of 4,4'-diphenylethane diisocyanate and toluene diisocyanate, two polyols of polyester polyols(PEP), polycarbonatediol(PCD), including and anionic center of dimethylol butanoic acid, a chain extenders of ethylenediamine(EDA), and a neutral agent of triethylamine. Synthesized polyurethane resins and commercially available bisphenol A type waterborne epoxy resin were blended in weight ratios of 80:20 to prepare polyurethane/epoxy hybrid resins. The synthesized waterborne polyurethane/epoxy hybrid resins were reacted with aminosilane compound to improve mechanical properties. Aminosilane-treated polyurethane /epoxy hybrid resins showed better mechanical properties.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.403-409
• /
• 2012

Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로 부터 제조된 polyurethane prepolymer의 말단 NCO기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATWPUD)을 합성하였다. 이 ATWPUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합시켜 전도성 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 막을 형성하였다. ATWPUD와 MWCNT를 혼합하여 얻어진 코팅 막의 표면저항 값은 $10^{7.6}{\sim}10^{7.7}{\Omega}/cm^2$로 순수한 waterborne polyurethane dispersion (WPUD)과 MWCNT의 혼합물로부터 제조된 코팅 막의 $10^{10.9}{\Omega}/cm^2$ 보다 우수한 전기전도도를 나타내었다. 또한 ATWPUD에 첨가되는 MWCNT의 양이 증가될수록 코팅 막의 전기전도도는 증가하였지만 연필경도 및 부착력은 감소되었다.

• 한국응용과학기술학회지
• /
• 제27권2호
• /
• pp.188-195
• /
• 2010

In this study, we experimented that how to synthesis waterborne urethane-acrylic hybrid resin for leather coatings. First of all, We had analyzed data by FT-IR, SEM and TGA for the machanical properties. By TGA analysis polymers showed heat distortion temperature. and by FT-IR measurement we confirmed that synthesis of urethane and acrylic. In the experiment, solvent resistance, polyurethane and acrylic grades 4-5 showed both a high. Tensile strength measured in the waterborne polyurethane > Acrylic emulsion showed strength in the order. Films were obtained by coating the water born resin on leveled surfaces and allowing them to dry at room temperature for 72hrs. After demolding, the films were kept in a desiccator to avoid moisture contant at $25^{\circ}C$ for 45hrs before the measurements. In this result, the mechanical propersies of waterborne polyurethane-acrylic hybrid resin showed that how effect to resin in leather coating between polyurethane content and acrylic content. Therefore, acrylic emulsion had most high solvent resistance glade and waterborne polyurethane had good result in abrasion test and tensile strength.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.614-620
• /
• 2012

Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로부터 제조된 폴리우레탄 prepolymer의 말단 NCO 기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATPUD)을 합성하였다. 이 ATPUD와 순수한 waterborne polyurethane dispersion (PUD)을 각각 전도성 고분자인 polystyrene sulfonate로 도핑된 poly (3,4-ethylenedioxythiophene)[PEDOT/PSS]과 블렌딩시켜 대전방지용 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 도막을 형성하였다. PEDOT/PSS가 2.5 g 이하로 적당량 첨가된 경우에는 ATPUD로 제조된 코팅 도막의 표면저항 값은 $1.0{\times}10^{11}{\sim}2.5{\times}10^8{\Omega/cm^2$로 순수한 PUD로부터 제조된 코팅 도막의 $5.0{\times}10^{11}{\sim}6.3{\times}10^9{\Omega}/cm^2$ 보다 우수한 전기전도도를 나타내었다. 그러나 PEDOT/PSS가 3.0 g으로 과량 첨가된 경우에는 ATPUD로부터 제조된 코팅 도막과 PUD로부터 제조된 코팅 도막은 비슷한 전기전도도를 나타내었다.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.359-366
• /
• 2011

In this study we experimented that how polyurethane effect to acrylic-polyurethane resin in Full-Grain leather coatings. First of all, we consummated waterborne acrylic emulsion and waterborne polyurethane resin, Than we prepared F.G leathers which were coated by acrylic resin and acrylic-polyurethane resins. According to measured data for solvent resistance, acrylic resin and acrylic-polyurethane resins had good property. Sample a(WAC) had most low strength($2.10kg_f/mm^2$) and sample d(WAC 93 : WPU 7) had most high strength($3.41kg_f/mm^2$). Also we knew that most good property of abrasion is d(47.4 mg). In elongation case, a(WAC) had most good result(645 %) in this experiment.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.632-638
• /
• 2012

Isophorone diisocyanate (IPDI), polycarbonate diol (PCD), dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, PUD)을 합성하였다. 이 PUD에 아크릴 단량체인 HEMA (2-hydroxyethyl methacrylate)와 MMA (methyl methacrylate)의 혼합물을 첨가하여 수분산 폴리우레탄-아크릴 혼성 용액을 제조하였다. 그 결과 제조된 혼성 용액의 평균 입도는 아크릴 단량체의 첨가량이 증가함에 따라 증가하였다. 또한 수분산 폴리우레탄-아크릴 혼성 용액으로부터 제조된 코팅 도막의 내마모성과 내화학성은 순수한 PUD 보다 크게 향상되었다.