• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.261-266
• /
• 2009

The angular dispersion-type non-scanning Fabry-Perot was applied to an ethanol-water mixture in order to investigate its acoustic properties such as the sound velocity and the absorption coefficient. The scattered light from the mixture was analyzed by using the charge-coupled-device area detector, which made the measurement time much shorter than that obtained by using the conventional scanning tandem multi-pass Fabry-Perot interferometer. The sound velocity showed a deviation from ultrasonic sound velocities at low temperatures accompanied by the increase in the absorption coefficient, indicating acoustic dispersion due to the coupling between the acoustic waves and some relaxation process. Based on a simplified viscoelastic theory, the temperature dependence of the relaxation time was obtained. The addition of water molecules to ethanol reduced the relaxation time, consistent with dielectric measurements. The present study showed that the angular dispersion-type Fabry-Perot interferometer combined with an area detector could be a very powerful tool in the real-time monitoring of the acoustic properties of condensed matter.

• Journal of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.11-14
• /
• 1966

The thermodynamic parameters for the solvolysis of the p-nitrobenzyl chloride which take place in the ethanol-water mixture media were determined. From the application of this data to the formula ${\delta}_M{\Delta}H^{\neq} = a'Y + b{\delta}_M{\Delta}S^{\leq}$ the following conclusion was obtained. The substrate constant a' for this reaction was not varied in the media which contain more than 50% alcohol and less than 50% alcohol. From this, it is clear that the mechanism of this reaction is the same both in the water-rich solvent and in the alcohol-rich solvent.

• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.916-922
• /
• 2011

The antioxidative activity of a medicinal herb mixture combined with traditional natural herbal materials was investigated. The medicinal herb mixture yielded 35.00% water extracts and 25.33% 80% ethanol extracts. The ethyl acetate fraction yields were 0.64% in the water extracts and 3.76% in the 80% ethanol extracts. The total flavonoid contents of the water and 80% ethanol extracts were 2.34 and 2.42%, respectively, and their total phenolic contents were 5.04 and 4.56%. The total flavonoid and phenolic contents of the ethyl acetate fraction were the highest in the various solvent extracts. The extracts were rich in salicylic and ${\rho}$-coumaric acids. The electron-donating ability of the medicinal herb mixture was 43.32% in the water extracts and 41.32% in the 80% ethanol extracts, and the nitrite-scavenging ability was 9.68% in the water extracts and 8.94% in the 80% ethanol extracts.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.5
• /
• pp.78-84
• /
• 2008

Heat pipes are considered to be promising candidates to enhance the heat transport capability of evacuated solar collectors in a wide temperature range. The working fluid must be selected properly considering various operating conditions of heat pipes for medium-high temperature range to avoid dry-out, local overheating, and frozen failure. The advantage of using binary mixture as heat pipe working fluid is that it can extend operating temperature range of the system as it can overcome operating temperature limit of a single fluid. Various operating temperature ranges were imposed in the experiments to simulate the actual operation of solar collectors using water-ethanol binary mixture. Tests were conducted for the coolant temperature range of -10$^{\circ}C$ to 120$^{\circ}C$, and mixing ratio range was from 0 to 1 based on mass fraction.

• Solar Energy
• /
• v.11 no.1
• /
• pp.78-86
• /
• 1991

Heat transfer characteristics of a rotating heat pipe have been studied numerically and experimentally with using water-ethanol mixture as working fluid. And triangular fins are attached inside the rotating heat pipe. Experimental results generally agreed with numerical results. According to increasing rpm and vapour pressure of the rotating heat pipe, the heat transfer rate increased. And also according to decreasing the concentration of ethanol, the heat transfer rate increased. In the case of using the pure ethanol as working fluid, the heat transfer rate was about 80% of using distilled water. The heat transfer rate and operating temperature difference of the rotating heat pipe was much influenced by ethanol concentration, and the optimum ethanol concentration was 0.2.

• Journal of the Korean Chemical Society
• /
• v.59 no.5
• /
• pp.454-465
• /
• 2015

The goal of this study is to investigate pre-service chemistry teachers’ understanding of the boiling process of a liquid mixture. We surveyed 65 students in the chemistry program of the College of Education about the boiling point of a 50%(by mole) ethanol aqueous solution and the temperature changes during heating. We then interviewed 9 of these students. According to the survey results, the percent of the pre-service teachers who thought that the boiling point of the ethanol solution would be ‘between the boiling points of ethanol and water (78-100 ℃)’ and ‘the same as that of ethanol’ were 52.3% and 35.4%, respectively. The majority of those who stated the former explained that the boiling point of the ethanol solution increased due to the effects of attraction or blocking by water molecules. Most of those who believed the latter explained that physical properties such as the boiling point would not be changed by the addition of water. With regard to the temperature change during heating, 69.2% of the teachers thought that the temperature would increase gradually while boiling, which some thought resulted from the increasing amount of water in the solution as the ethanol boiled off. Others thought that two temperature plateaus would be observed as each component of the liquid mixture underwent phase transition at its specific boiling point. When asked about the particle model of the gas phase during the boiling and evaporation process, some students drew both ethanol and water during evaporation but only ethanol when boiling. We discussed several alternative concepts of pre-service chemistry teachers about the boiling process of liquid mixtures and ways to improve their understanding.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.70-76
• /
• 1983

Separation of fructose from glucose-fructose mixture was studied by utilizing the solubility differences of both sugars in the mixed solvents of water and alcohols with or without the presence of NaCl and $CaCl_2$. Better separation of fructose was obtained in ethanol-water solvent than other solvent-water systems. The addition of NaCl to the ethanol-water solvent system improved the separation factor based on the relative composition of two sugars in the supernatant by twice. The change in feed composition from 50-50 mixture of glucose and fructose resulted in a worse separation factor. It was found in the present studies that the best separation of fructose (fructose 75%, glucose 25%) was achieved when NaCl and ethanol was slowly added to the solution containing 20% water, 40% fructose and 40% glucose to make up the final solution with the parts of ethanol 36 ml, water 4 ml, glucose 8 gm, fructose 8 gm and NaCl 0.25gm.

• Bulletin of the Korean Chemical Society
• /
• v.4 no.3
• /
• pp.115-119
• /
• 1983

The ionic association constants (K) of 2, N-dimethyl pyridinium iodide (2NDMPI) in 95 volume percentage ethanol-water mixture were determined by a modified UV and conductance method at $20^{\circ}C{\sim}50^{\circ}C$ under 1 to 2000 bars. The K values increase with increasing pressure and decrease with temperature. The total partial molar volume change (${\Delta}V$) has relatively small negative value and the absolute ${\Delta}V$ value decrease with increasing pressure and temperature. The ion size (a) and solvation number (n) of 2NDMPI were about 5 $\AA$ and changed from 1 to 3 with decreasing temperature. Other thermodynamic parameters such as enthalpy (${\Delta}H^{\circ}$) and entropy (${\Delta}S^{\circ}$) for the equilibrium of the 2NDMPI were evaluated. From all the parameters mentioned above, we came to conclusion that the electrostriction effect of 2NDMPI in the ethanol-water mixture is enhanced with increasing pressure and decreasing temperature.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.374-378
• /
• 2011

The studied results of the gasohol, which is the mixture of gasoline and ethanol, were investigated for the promotion of applications on commercially by gasoline vehicle referring to octane number, minimum water contents be involved, and separation inhibitors for protecting phase separation etc. especially for the E10 and E20. The results showed that octane number will be revised by higher value as the ethanol is added more, and it's more effect in case of be added as a mixture than individually when inhibition agents is added for the inhibition of separation. and it's reasonable for the water contents of less than 1% by comparing with experimental results and in view of regulations of various countries.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.403-411
• /
• 2007

Monodisperse micron-sized polystyrene (PS) spheres were successfully obtained using a single stage soap-free emulsion method in aqueous media mixed with ethanol (co-solvent) containing NaCI as the electrolyte. The optimum conditions for preparing the monodisperse PS microspheres, using soap-free emulsion polymerization in a water/ethanol mixture with an electrolyte, were studied. The presence of the co-solvent and electrolyte controlled the particle dispersion stability during the polymerization. The microspheres formed using PS, with a weight-average diameter of $2.6{\mu}m$, coefficient of variation of 5.3% and zeta potential of -15.1 eV, were successfully obtained in the presence of 0.1 wt% NaCI, 10 wt% monomer, 0.1 wt% initiator and 95/5 (g/g) of a water/ethanol mixture reacted at $70^{\circ}C$ for 24 h.