• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.365-369
• /
• 2007

This study was conducted to seek optimum concentration and treatment time of fermented rice water (Rizen) to disinfect food-borne bacteria in kitchen towel. $2.65\;log_{10}cfu/g$ of E. coli was reduced when double or triple diluted fermented rice water was treated during 2 hours. In case of concentrated fermented rice water, crude and double diluted solutions showed complete sterilization after 2 and 5 hours, respectively. On the other hand, triple, quadruple, quintuple diluted solutions needed 24 hours for complete sterilization. The effect of fermented rice water as a disinfectant was compared with water, detergent and chlorine treatment against E. coli and S. Typhimurium contaminated in kitchen towel. The initial number of E. coli in untreated kitchen towel were $5.0\;log_{10}cfu/g$ and were decreased to 4.32, 3.70 and 3.02 by treatments of water, detergent and chlorine, respectively. The double and triple diluted fermented rice water and double diluted concentrated fermented rice water also reduced the E. coli in kitchen towel to 2.43, 2.30 and $1.88\;log_{10}cfu/g$, respectively. The initial number of S. Typhimurium in untreated kitchen towel were $4.80\;log_{10}cfu/g$ and were decreased to 4.12, 3.58 and 2.81 by treatments of water, detergent and chlorine, respectively. The double and triple diluted fermented rice water and double diluted concentrated fermented rice water also reduced the E. coli in kitchen towel to 2.14, 2.03 and $1.59\;log_{10}cfu/g$, respectively. Consequently, the fermented rice water is thought to be a good disinfectant to reduce food-borne bacteria like E. coli and Salmonella contaminated in kitchen towel.

• The Plant Pathology Journal
• /
• v.27 no.2
• /
• pp.138-147
• /
• 2011

Xylogone ganodermophthora, an ascomycetous fungus, is known to cause yellow rot in the cultivated mushroom Ganoderma lucidum. In this study, we investigated the dissemination of this fungal pathogen in G. lucidum grown in cultivation houses. To determine the role of ascospores produced by X. ganodermophthora in disease development, we constructed a green fluorescent protein-labeled transgenic strain. This X. ganodermophthora strain produced a number of ascomata in the tissues of oak logs on which G. lucidum had been grown and on the mushroom fruit bodies. However, the ascospores released from the ascomata were not able to germinate on water agar or potato dextrose agar. Moreover, less than 0.1% of the ascospores showed green fluorescence, indicating that most ascospores of X. ganodermophthora were not viable. To determine the manner in which X. ganodermophthora disseminates, diseased oak logs were either buried in isolated soil beds as soil-borne inocula or placed around soil beds as air-borne inocula. In addition, culture bottles in which G. lucidum mycelia had been grown were placed on each floor of a five-floor shelf near X. ganodermophthora inocula. One year after cultivation, yellow rot occurred in almost all of the oak logs in the soil beds, including those in beds without soil-borne inocula. In contrast, none of the G. lucidum in the culture bottles was infected, suggesting that dissemination of X. ganodermophthora can occur via the cultivation soil.

• The Plant Pathology Journal
• /
• v.21 no.4
• /
• pp.328-333
• /
• 2005

Paenibacillus elgii SD17 (KCTC $10016BP^T$=NBRC $100335^T$) was recently reported as a new species. Based on its inhibitory activity to Thanatephorus cucumeris AG1-1, strain SD17 was further evaluated for its potential as a biocontrol agent against soil-borne diseases of turf grasses in Korea. P. elgii SD17 showed a broad spectrum of antimicrobial activity in vitro test and suppressed development of turf grass diseases; Pythium blight caused by Pythium aphanidermatum and brown patch caused by T. cucumeris AG1-1 on creeping bentgrass (Agrostis palustris) in the growth chamber tests. Under a condition for massive culture in a 5,000 L fermenter, P. elgii SD17 reached $6.4{\times}10^8$ spores/ml that resulted in approximately $1.0{\times}10^7$ cfu/g when formulated into a granule formulation (GR) using the whole culture broth instead of water. Using the GR formulation, biocontrol activity of P. elgii SD17 was confirmed. In the growth chamber tests, the GR formulation was effective against brown patch and Pythium blight with similar level of disease severity compared to each of the standard fungicides at the application rates of 10 g/$m^2$ or above. In the field tests, compared to each untreated control, the GR formulation also effectively controlled Pythium blight, brown patch and large patch at all the application rates of 5, 10 and 20 g/$m^2$, respectively, without significant response by the application rates. However its performance was inferior to each of the standard chemical fungicides. Based on these results, we consider this GR formulation of P. elgii SD17 as an effective biocontol agent to suppress Pythium blight, brown patch and large patch of turf grasses in Korea.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2008.05a
• /
• pp.93-95
• /
• 2008

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.483-486
• /
• 2002

Injection of microbubbles and/or polymer solution has been known to be a promising method for the reduction of frictional drag of water-borne vehicles. Naval Architects have been interested in friction drag reduction technology, since the friction drag of a commercial ship can be over $70{\%}$ of total resistance. The reduction of friction drag is also important for autonomous underwater vehicles and naval submarines to improve their durability and survivability In this study two sets of experiments were carried out for the friction drag reduction of 2-D channel wall and flat plate in the circulating water channels in Chungnam National University. Preliminary results from the experiments are presented and discussed.

• Journal of Ship and Ocean Technology
• /
• v.9 no.1
• /
• pp.27-37
• /
• 2005

An experimental study has been carried out as a basic research for the development of the friction drag reduction technology for water-borne vehicles by injecting microbubbles or polymer solution. Experimental apparatus and procedures have been devised and prepared to measure the changes of the wall friction with the injection of additives and the basic experimental data on friction drag reduction are obtained for fully developed channel flows. The effects of key controlling parameters were investigated for higher drag reduction with varying the concentration and the injection rate of additives. The frictional drag has been reduced up to $25\%$ with the microbubble injection and $50\%$ with the polymer solution injection.

• Corrosion Science and Technology
• /
• v.15 no.6
• /
• pp.297-302
• /
• 2016

Water-based systems are dominating the coating market because of worldwide VOCs regulations. Research is focusing especially on waterborne polyurethane (WPU) because of its unique mechanical and chemical properties. However, commercial WPU consists of linear thermoplastic polymers with polar groups on the main chain, which do not perform as well as solvent-borne PU in a two-pack system. In this study, APTES were used as a chain crosslink agent to overcome commercial WPU's limited performance. WPUs synthesized by using a sol-gel process were evaluated with FT-IR, particle analysis, TGA, tensile tests, pull-off tests, SEM, and EIS. The results showed that WPUs with added APTES had better thermal stability, mechanical properties, and water resistance than did WPUs without added APTES. Consequently, the sol-gel process increased the crosslink density of WPUs and modified the WPU's own properties.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.6
• /
• pp.688-694
• /
• 2008

The reduction of the structure-borne noise is very important in order to reduce the noise of a ship. The noise at the high frequency range usually comes from the fluid flowing. The noise from the sea-water conveying pipe is one of the main source on these high frequency range. Therefore, the transmissibility variations are evaluated according to the shape of the rubber mount. The evaluations are performed with the frequency response function numerically and experimentally.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.924-931
• /
• 2022

Undenatured castor oil and trimethylolpropane (TMP) were used to obtain bio-based water-based polyurethane. Isophorone diisocyanate (IPDI) was incorporated into the formulation to obtain a transparent film, and ethylenediamine (EDA) was used for chain extension. In order to measure the change in physical properties according to the contents of castor oil and TMP, each tensile strength, elongation, and abrasion resistance test was conducted. As the contents of castor oil and TMP increased, the tensile strength increased, the elongation decreased, and the surface hardened strongly as the respective contents increased.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.136-136
• /
• 2016

Commonly used oil-based polymer resin has environmental and safety issues. Many researches for replacing the harmful solvent-borne resins to water-borne resins have been investigated to purify harmful environmental resources and follow the export and import of hazardous materials regulations. In this research, ultrasonic spray coatings of aqueous polymer resin were studied to fabricate thin insulating layer (${\sim}{\mu}m$) on the rectangular copper wire. It needs to have appropriate wettability between resin and substrate during the ultrasonic spray coating process to coat aqueous polymer uniformly. Furthermore, stabilities of coating solution and fabricating process are required to form thin insulating layer on the substrate. In here, physical characteristics such as viscosity of 6 types of commercial polymer dispersions and emersions were analyzed to confirm compatibility for ultrasonic spray coating process. These resins were dissolved in isopropyl alcohol, used for true solvent, and were diluted with ethanol, utilized for diluent. Also, solubilities, dispersion characteristics, and viscosities of these diluted polymer resin solutions were confirmed. Dispersion characteristic and viscosity of coating solution affects jetting of ultrasonic spray coating and these jetting characteristics influence morphologies of insulating layer. In conclusion, we have known that aqueous polymer solution should have outstanding dispersion characteristic and certain range of viscosity to fabricate thin polymer insulating layer uniformly with ultrasonic spray coating.